S2K Commerce - Products Dropdown

- ${title}
Loading...
S2K Commerce - Shopping Cart

- ${title}
Loading...
S2K Commerce - Order Entry

- ${title}
Loading...

Description
Price
Quantity
FUSE BLOCK TERM DUAL 30-300A
Dual terminal fuse block
Dual MRBF (marine rated battery fuse) 30 to 300A terminal fuse block.
Compact, high-amp fuse appropriate for DC main, inverter, windlass, and bow thruster circuit protection.
Provides high current protection in tight space constraints.
Ignition protected when used with Blue Sea Systems MRBF terminal fuse.
Isolated stud design uses standard M8 hardware and permits stacking of terminals.
Insulating cap prevents accidental shorts.
Accepts 5∕16" ring terminals.
Mounts on 3/8" terminal studs.
Maximum voltage: 58V DC, fuse sold separately.
Item#:
BLS2151
Manufacturer:
Marinco, Ancor, Guest, BlueSea
52.1600
41.73
EACH
BLOCK FOR MEGA FUSE 100-300A
Fuse Block MEGA 100-300A
Accepts 5/16" (M8) ring terminals.
Insulating cover satisfies ABYC/USCG insulation requirements.
Insulating cover breakouts allow wire access in three directions.
Insert molded studs ensure secure fuse mounting.
Stainless steel studs provide resistance to corrosion and high torque for excellent electrical contact.
UL 94-V0 base resists high heat.
100-300A, fuse sold separately.
Maximum voltage: 32V DC.
Item#:
BLS5001
Manufacturer:
Marinco, Ancor, Guest, BlueSea
34.9400
27.95
EACH
FUSE BLOCK ANL 300 AMP
ANL 300 Fuse Block with Cover
ANL 35 to 300A fuse block with insulating cover.
Accepts 5/16" (M8) ring terminals.
For use on systems up to 32 volts DC.
Swing out design allows replacement of the fuse without removing fasteners.
Stainless steel studs provide resistance to corrosion and high torqueing for excellent electrical contact.
UL 94-V0 base resists high heat.
Insert molded studs ensure secure fuse mounting.
Insulating cover satisfies ABYC/USCG requirements.
Cover breakouts allow wire access in any direction.
Maximum voltage: 32V DC, fuse sold separately.
Item#:
BLS5005
Manufacturer:
Marinco, Ancor, Guest, BlueSea
38.5300
30.82
EACH
Call to Order
Snap-on terminal cover insulates all conductive parts, satisfying ABYC/USCG requirements.
Cover breakouts allow wires from sides or bottom.
Terminal screws compress fuse blades within blocks for low resistance connections.
Ignition protected.
Label recess accepts large format label.
Fuses sold separately.
Cover breakouts allow wires from sides or bottom.
Terminal screws compress fuse blades within blocks for low resistance connections.
Ignition protected.
Label recess accepts large format label.
Fuses sold separately.
Item#:
BLS5006100
Manufacturer:
Marinco, Ancor, Guest, BlueSea
40.5100
32.41
EACH
FUSE BLOCK 3AG DC 6 CIRCUIT
ST Glass Fuse Block
6 circuit fuse block with negative bus.
Innovative design allows for labeling, spare fuse storage, and easy fuse removal.
Clear insulating cover with label recesses accepts large format labels.
Cover insulates all conductive parts, satisfying ABYC/USCG requirements and storing spare fuses.
Tin-plated copper buses and phosphor bronze fuse clips give 30 ampere rating per circuit.
Accepts AGC, MDL, and all other 3AG glass fuses.
Maximum amperage: 30A per circuit; 100A total.
Maximum voltage: 32 volts DC.
Item#:
BLS5015
Manufacturer:
Marinco, Ancor, Guest, BlueSea
61.9700
49.58
EACH
Call to Order
FUSE BLOCK AGC 6 CIRCUIT
ST Glass Fuse Block
6 circuit fuse block with cover.
Innovative design allows for labeling, spare fuse storage, and easy fuse removal.
Clear insulating cover with label recesses accepts large format labels.
Cover insulates all conductive parts, satisfying ABYC/USCG requirements and storing spare fuses.
Tin-plated copper buses and phosphor bronze fuse clips give 30 ampere rating per circuit.
Accepts AGC, MDL, and all other 3AG glass fuses.
Maximum amperage: 30A per circuit; 100A total.
Maximum voltage: 32 volts DC.
Item#:
BLS5018
Manufacturer:
Marinco, Ancor, Guest, BlueSea
52.6300
42.11
EACH
FUSE HOLDER AGC/MDL IP66 20A
Waterproof fuse holder
AGC/MDL fuse holder replaces fuse holders found in Contura waterproof fuse panels.
Water resistant; easy to open.
Will withstand the water exposures normally encountered in above deck applications: salt spray, rain, hose washdowns, and momentary immersions.
20 amp maximum amperage.
1/2" mounting hole diameter.
Item#:
BLS5021
Manufacturer:
Marinco, Ancor, Guest, BlueSea
5.5000
4.40
EACH
Easy to install 4 ATO®/ATC® fused circuits.
Mounts on the battery terminal stud.
Screw terminals for securing wires.
Four nylon insulated ring terminals included.
Insulating cover included.
Accepts small format circuit labels
Includes 1 fuse.
Rated for 100 amps per block, 30 amps per circuit.
Maximum voltage: 32V DC.
Item#:
BLS5023
Manufacturer:
Marinco, Ancor, Guest, BlueSea
35.2400
28.19
EACH
FUSE BLOCK ST BLADE 4 CIRC BTM
Terminal mount fuse block kit
Easily add 4 fused circuits to the terminal of a battery.
Provides power to new accessories in your boat or vehicle.
Mounts on the battery terminal stud.
Screw terminals for securing wires.
Rated for 100 amps per block, 30 amps per circuit.
Maximum voltage: 32V DC.
Accepts small format circuit labels.
Insulating cover meets ABYC/USCG insulation requirements.
Ignition protectedmeets ISO 8846 and SAE J1171 for use in a gasoline engine compartment.
Includes a 4-circuit negative busbar.
Includes write on labels.
Includes four 16-14 AWG and four 12-10 AWG nylon insulated ring terminals, fuses sold separately.
Item#:
BLS5024
Manufacturer:
Marinco, Ancor, Guest, BlueSea
51.4600
41.16
EACH
FUSE BLOCK ATO 6 CIRC W/ GRND
ST Blade Fuse Block
Consolidates branch circuits and in-line fuses.
Positive distribution bus with #10-32 stud.
Can be used for 24-hour circuits.
Cover satisfies ABYC/USCG requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses, and label recesses that accept Blue Sea Systems small format labels for circuit identification.
Includes 20 write-on circuit labels.
Tin-plated copper buses and fuse clips.
Accepts ring or snap fork type terminals.
Accepts ATO® and ATC® fast acting blade fuses.
6 circuits, maximum 100A per block, maximum 30A per circuit.
Maximum voltage: 32V DC. Fuses sold separately.
Item#:
BLS5025
Manufacturer:
Marinco, Ancor, Guest, BlueSea
67.0400
53.63
EACH
Call to Order
FUSE BLOCK ATO 12 CIRC W/ GRND
ST Blade Fuse Block
Consolidates branch circuits and in-line fuses.
Positive distribution bus with #10-32 stud.
Can be used for 24-hour circuits.
Cover satisfies ABYC/USCG requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses, and label recesses that accept Blue Sea Systems small format labels for circuit identification.
Includes 20 write-on circuit labels.
Tin-plated copper buses and fuse clips.
Accepts ring or snap fork type terminals.
Accepts ATO® and ATC® fast acting blade fuses.
12 circuits, maximum 100A per block, maximum 30A per circuit.
Maximum voltage: 32V DC. Fuses sold separately.
Item#:
BLS5026
Manufacturer:
Marinco, Ancor, Guest, BlueSea
83.9100
67.13
EACH
FUSE BLOCK ST BLADE 6 CIRCUIT
ST Blade Fuse Block With Cover
6 circuit fuse block without negative bus consolidates branch circuits and in-line fuses.
100A maximum amperage per block; 30A maximum amperage per circuit; maximum voltage 32 VDC.
Positive distribution bus with #10-32 stud.
Can be used for 24-hour circuits.
Cover satisfies ABYC/USCG requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses, and label recesses that accept Blue Sea Systems small format labels for circuit identification.
Includes 20 write-on circuit labels.
Tin-plated copper buses and fuse clips.
Accepts ring or snap fork type terminals.
Accepts ATO® and ATC® fast acting blade fuses.
Fuses sold separately.
Item#:
BLS5028
Manufacturer:
Marinco, Ancor, Guest, BlueSea
58.6300
46.91
EACH
Call to Order
FUSE BLOCK ST BLADE 12 CIRCUIT
ST Blade Fuse Block With Cover
12 circuit fuse block without negative bus consolidates branch circuits and in-line fuses.
100A maximum amperage per block; 30A maximum amperage per circuit; maximum voltage 32 VDC.
Positive distribution bus with #10-32 stud.
Can be used for 24-hour circuits.
Cover satisfies ABYC/USCG requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses, and label recesses that accept Blue Sea Systems small format labels for circuit identification.
Includes 20 write-on circuit labels.
Tin-plated copper buses and fuse clips.
Accepts ring or snap fork type terminals.
Accepts ATO® and ATC® fast acting blade fuses.
Fuses sold separately.
Item#:
BLS5029
Manufacturer:
Marinco, Ancor, Guest, BlueSea
75.5300
60.42
EACH
FUSE BLOCK ST SPLIT 12 W/GRND
Bus fuse block
Split bus fuse block with ground for use when a mix of switched and 24-hour circuits are desired in the same block.
Provides two isolated groups of six ATO®/ATC® circuits.
For use with either two isolated batteries or with a single battery providing a mix of 24 hour and switched circuits.
Screw terminals for securing wires accept ring terminals.
One-piece stainless flange nuts ensure safe and secure connections.
Clear insulating cover with label recesses and storage for two fuses, satisfies ABYC/USCG insulation requirements.
Easy to open, push button latch for easy access to fuses.
Tin-plated copper buses and fuse clips.
Fuses sold separately.
Maximum amperage: 30A per circuit; 100A total.
Maximum voltage: 32 volts DC.
Item#:
BLS5032
Manufacturer:
Marinco, Ancor, Guest, BlueSea
107.0800
85.66
EACH
FUSE BLOCK ST BLADE 6 CIRCUIT
Fuse block
ST blade fuse block.
Positive distribution bus with #10-32 stud.
Can be used for 24-hour circuits.
Tin-plated copper buses and fuse clips.
Accepts ring or spade type terminals.
Accepts ATO and ATC fast acting blade fuses.
6 circuits, maximum 100A per block, maximum 30A per circuit.
Maximum voltage: 32V DC.
Fuses sold separately.
Item#:
BLS5033
Manufacturer:
Marinco, Ancor, Guest, BlueSea
54.4700
43.57
EACH
FUSE BLOCK ST BLADE 6 CIRC IND
6 circuit fuse block
ST blade fuse block with 6 independent circuits.
Corrosion resistant, tin-plated copper fuse clips reduce heat and improve the efficiency of the electrical system.
Clear insulating cover with label recesses accepts small format labels.
Spare fuse holder in cover. Fuses sold separately.
Accepts ring or snap fork type terminals.
Includes two terminal block jumpers.
Maximum amperage 30A per circuit; 40A per jumped circuit group.
Maximum voltage: 32V DC.
Item#:
BLS5035
Manufacturer:
Marinco, Ancor, Guest, BlueSea
58.6300
46.91
EACH
ST blade compact 4 circuit fuse block.
Provides surface mount circuit protection for ATO®/ATC® fuses in a compact footprint.
Ignition protected when cover is secure, meets ISO 8846 and SAE J1171 for use in a gasoline engine compartment.
Single side design allows wire entry from one side to minimize footprint.
Insulating cover meets ABYC/USCG insulation requirements.
Tin-plated copper buses and fuse clips.
Accepts ring or snap fork type terminals.
Includes 4 write-on circuit labels.
Maximum amperage: 30A per circuit; 100A total.
Maximum voltage: 32 volts DC.
Fuses sold separately.
Item#:
BLS5045
Manufacturer:
Marinco, Ancor, Guest, BlueSea
42.9000
34.32
EACH
Call to Order
ST blade compact 8 circuit fuse block.
Provides surface mount circuit protection for ATO®/ATC® fuses in a compact footprint.
Provides surface mount circuit protection for ATO®/ATC® fuses in a compact footprint.
Ignition protected when cover is secure, meets ISO 8846 and SAE J1171 for use in a gasoline engine compartment.
Single side design allows wire entry from one side to minimize footprint.
Insulating cover meets ABYC/USCG insulation requirements.
Tin-plated copper buses and fuse clips.
Accepts ring or snap fork type terminals.
Includes 8 write-on circuit labels.
8 circuits, maximum amperage: 30A per circuit; 100A total.
Maximum voltage: 32V DC.
Fuses sold separately.
Item#:
BLS5046
Manufacturer:
Marinco, Ancor, Guest, BlueSea
68.2700
54.62
EACH
Call to Order
FUSE HOLDER CRIMPABLE (HFA)
In-line AGC/MDL fuse holder
Crimpable in-line AGC/MDL fuse holder.
Accepts 12 - 18 AWG wire.
30A maximum fuse amperage.
Fuse sold separately.
Item#:
BLS5060
Manufacturer:
Marinco, Ancor, Guest, BlueSea
3.3400
2.67
EACH
FUSE HOLDER AGC/MDL WTRPRF 20A
In-line AGC/MDL fuse holder
Waterproof. Accepts 12 - 16 AWG wire. Maximum fuse amps: 30. Fuse sold separately.
Item#:
BLS5061
Manufacturer:
Marinco, Ancor, Guest, BlueSea
8.1100
6.49
EACH
FUSE HOLDER AGC/MDL WTRPRF 20
In-line AGC/MDL fuse holder
Waterproof. Accepts 12 - 16 AWG wire. Maximum fuse amps: 20. Fuse sold separately.
Item#:
BLS5062
Manufacturer:
Marinco, Ancor, Guest, BlueSea
24.0700
19.26
EACH
FUSE HOLDER AGC/MDL IN-LINE
In-line AGC/MDL fuse holder
Heavy-duty. Accepts 12-18 AWG wire. Rated for up to 30 amps. Fuse sold separately.
Item#:
BLS5063
Manufacturer:
Marinco, Ancor, Guest, BlueSea
5.2500
4.20
EACH
FUSE HOLDER ATO/ATC IN-LINE
Fuse holder
For use with ATO or ATC fuses Supplied with 12 AWG pigtails Maximum fuse amps: 30. Fuse sold separately.
Item#:
BLS5064
Manufacturer:
Marinco, Ancor, Guest, BlueSea
5.1500
4.12
EACH
FUSE HOLDER ATO/ATC WATERPROOF
Waterproof fuse holder
For use with ATO or ATC fuses.
Supplied with 12 AWG pigtails.
Maximum fuse amps: 30.
Fuse sold separately.
Supplied with 12 AWG pigtails.
Maximum fuse amps: 30.
Fuse sold separately.
Item#:
BLS5065
Manufacturer:
Marinco, Ancor, Guest, BlueSea
11.1900
8.96
EACH
FUSE HOLDER IN-LINE MAXI
MAXI in-line fuse holder
MAXI® in-line fuse holder.
Supplied with 5 inch #6 red lead wire and two adhesive lined sealing shrink wrap tubes.
Fire wall surface mounting hole permits two or more holders to be mounted together.
Protective cover with retaining strap.
Fuse sold separately.
Maximum voltage 32V DC, maximum amperage 48A.
Item#:
BLS5068
Manufacturer:
Marinco, Ancor, Guest, BlueSea
34.7900
27.83
EACH
FUSE BLOCK TERMINAL 30-300 AMP
Single terminal fuse block
MRBF (marine rated battery fuse) 30 to 300A terminal fuse block.
Compact, high-amp fuse appropriate for DC main, inverter, windlass, and bow thruster circuit protection.
Provides high current protection in tight space constraints.
Ignition protected when used with Blue Sea Systems MRBF terminal fuse.
Isolated stud design uses standard M8 hardware and permits stacking of terminals.
Insulating cap prevents accidental shorts.
Accepts 5∕16" ring terminals.
Mounts on 3/8" terminal studs.
Maximum voltage: 58V DC, fuse sold separately.
Item#:
BLS5191
Manufacturer:
Marinco, Ancor, Guest, BlueSea
35.5200
28.41
EACH
FUSE BLOCK T 225-400A
Fuse Block Class T 225-400 Amp
The fuse system recommended by most inverter manufacturers for high speed response to short circuits.
Clear insulating cover, satisfies ABYC/USCG requirements.
For use on systems up to 160V DC.
Large 3/8"-16 stud terminals accept ring terminals for wire up to 4/0 AWG.
Large heat dissipating tin-plated copper mounting blocks.
225 to 400A, fuse sold separately.
Maximum voltage: 160V DC.
Maximum voltage: 160V DC.
Item#:
BLS5502
Manufacturer:
Marinco, Ancor, Guest, BlueSea
78.4400
62.75
EACH
FUSE BLOCK ANL 35-750AMP
ANL fuse block with cover
Accepts 5/16" (M8) ring terminals.
For use on systems up to 32V DC.
Swing out design allows replacement of the fuse without removing fasteners.
Stainless steel studs provide resistance to corrosion and high torqueing for excellent electrical contact.
UL 94-V0 base resists high heat.
Insert molded studs ensure secure fuse mounting.
Insulating cover satisfies ABYC/USCG requirements.
Cover breakouts allow wire access in any direction.
35 to 750A, fuse sold separately.
Maximum voltage: 32V DC.
Maximum voltage: 32V DC.
Item#:
BLS5503
Manufacturer:
Marinco, Ancor, Guest, BlueSea
78.4400
62.75
EACH
FUSE BLOCK MIDI 30-200 AMP
MIDI safety fuse block
MIDI safety fuse block. Ignition protected, safe to use on gasoline or diesel boats Sealed cover protects fuses from marine environments. Insulating cover satisfies ABYC/USCG insulation requirements Cover breakouts allow wire access in any direction. 200 amp maximum with 2/0 cable. Fuses sold separately. Weight: .4 lb.
Item#:
BLS7720
Manufacturer:
Marinco, Ancor, Guest, BlueSea
47.1900
37.75
EACH
FUSE BLOCK SAFETY HUB 100
SafetyHub 100 fuse block
The SafetyHub 100 combines an ignition protected fuse block and an integrated connecting plug.
Safe for use on gasoline powered boats, reduces wiring connections, and consolidates up to seven fused circuits.
Three 30A−200A MIDI®/AMI® fuses [sold separately] ideal for high-amp circuits including panel feeds, windlasses, and stereo amplifiers.
Four 1A−20A ATO®/ATC® fuses [sold separately] ideal for circuits including bilge pumps, alarms, and clock memory.
Sealed cover protects fuses from the harsh marine environment: IP66 ratingprotected against powerful water jets.
Integrated connector plugs eliminate loose wires and provide a secure, waterproof connection
Ignition protected fusing meets Coast Guard and ABYC requirements for installation on gasoline or diesel powered boats.
Item#:
BLS7725
Manufacturer:
Marinco, Ancor, Guest, BlueSea
129.0100
103.21
EACH
FUSE BLOCK SAFETY HUB 150
SafetyHub 150 fuse block
An ignition protected fuse block with screw termination safe for use on gasoline powered boats.
Accepts four AMI® or MIDI® fuses for high-amp circuits up to 200A.
Accepts six ATO® or ATC® fuses for circuits up to 30A including bilge pumps, electronics and lights.
Sealed cover protects fuses from the harsh marine environment and satisfies ABYC/USCG insulation requirements.
Negative bus provides common location for negative connection.
Circuit identification label with write-on capability.
Fuse puller easily removes ATO® or ATC® fuses.
Cover provides storage space for two spare ATO® or ATC® and two spare AMI® or MIDI® fuses and mounting screws.
One-piece stainless flange nuts ensure safe and secure connections.
Fuses sold separately.
Item#:
BLS7748
Manufacturer:
Marinco, Ancor, Guest, BlueSea
200.8300
160.66
EACH
FUSE HOLDER ANL
ANL fuse holder
Marinco compact ANL fuse holders offer unparalleled circuit protection for small electrical loads.
Specifications:
- cable connection studs: shared 5/16".
- double washers allow any ANL fuse brand to be fitted
- fuse type: ANL or ANN (fast blow)
- swinging fuse style allows changing fuse without removal of fastening nuts
- amperage: 35-300A
- 50 VDC (or determined by fuse fitted).
Dimensions: 3.9" x 1.9" x 2.1".
Item#:
MRN778-ANL
Manufacturer:
Marinco, Ancor, Guest, BlueSea
44.1800
35.34
EACH
FUSE HOLDER ANL W/2 STUDS 750A
ANL fuse holder
This ANL fuse holder offers unparalleled circuit protection by featuring additional cable security and
higher capacity by having additional studs for separate clamping of cables.
higher capacity by having additional studs for separate clamping of cables.
Specifications:
- cable mounting studs: 3/8"
- fuse mounting studs: 5/16"
- double washers allow any ANL fuse brand to be fitted
- fuse type: ANL or ANN (fast blow)
- swinging fuse style allows changing fuse without removal of fastening nuts
- amperage: 35-750A
- 50 V DC (or determined by fuse fitted)
- tinned CDA102 copper conductors.
Dimensions: 5.8" x 1.9" x 2.4".
Item#:
MRN778-ANL2S
Manufacturer:
Marinco, Ancor, Guest, BlueSea
93.1500
74.52
EACH
FUSE HOLDER ANL THRU PANEL500A
ANL fuseholder
This innovative, through-panel mounting fuse holder offers the user easy visual inspection of fuse state, and easy/safe access to change fuses if blown.
Provides high-capacity fusing, fast response, high interrupt ratings, and is ideal for protecting today's demanding onboard power electronics technology including inverters and battery chargers.
Specifications:
- cable mounting studs: 3/8"
- fuse mounting studs: 5/16"
- double washers allow any ANL fuse brand to be fitted
- fuse type: ANL or ANN (fast blow)
- swinging fuse style allows changing fuse without removal of fastening nuts
- amperage: 35-500A
- 50 VDC (or determined by fuse fitted)
- tinned CDA260 high conductivity brass conductors.
Dimensions: 3.9" x 1.9" x 1.4".
Item#:
MRN778-ANLTP
Manufacturer:
Marinco, Ancor, Guest, BlueSea
107.1300
85.70
EACH
FUSE HOLDER CLASS T 2STUD 400A
Class T fuse holder
225-400 amps Pro Installer Class-T fuse holder.
Class-T fusing provides the ultimate protection for high power circuits, and where extremely fast fuse blow characteristics are required.
Specifications:
- cable connection studs: 3/8"
- fuse mounting studs: 3/8"
- fuse type: Class-T (JLLN / TJN / A3T)
- 50V DC
- high temperature, fiber reinforced plastic base provides strength and chemical resistance;
clear polycarbonate cover
clear polycarbonate cover
- tinned CDA102 copper conductors
- stainless steel studs, washers and nuts for longevity in the marine environment.
Dimensions: 5.8" x 1.9" x 2.4".
Item#:
MRN778-T2S400
Manufacturer:
Marinco, Ancor, Guest, BlueSea
89.7400
71.79
EACH
FUSE HOLDER CLASS T 2STUD 600A
Class T fuse holder
450-600 amps Pro Installer Class-T fuse holder.
Class-T fusing provides the ultimate protection for high power circuits, and where extremely fast fuse blow characteristics are required.
Specifications:
- cable connection studs: 3/8"
- fuse mounting studs: 1/2"
- fuse type: Class-T (JLLN / TJN / A3T)
- 50V DC
- high temperature, fiber reinforced plastic base provides strength and chemical resistance;
clear polycarbonate cover
- tinned CDA102 copper conductors
- stainless steel studs, washers and nuts for longevity in the marine environment.
Dimensions: 5.8" x 1.9" x 2.4".
Item#:
MRN778-T2S600
Manufacturer:
Marinco, Ancor, Guest, BlueSea
105.3200
84.26
EACH
S2K Commerce - Products Dropdown

- ${title}
Loading...