1 - 36 of 47 ▶|
View:
 
Description
Price
Quantity

DETECTOR WATER FLOW 3/4" 10235

Water flow detector unit
Monitors cooling water flow to engines.
Activates an alarm when water is stopped.
Two-wire, non-polarity switch; normally closed.
Opens at 3 - 4 GPM of water flow.
Designed to be inserted into water adapter.
Can be drilled and tapped into plumbing.
Diameter: 3/4".
Item#:
AQL10235
Manufacturer:
Aqualarm
89.3600
71.48
EACH
Call to Order

DETECTOR WATER FLOW 3" 2-1/2MP

Water capacity flow detector
Aqualarm coolant flow sensor unit. 
Designed specifically for marine engines. 
Activates an alarm upon water flow interruption. 
Helps prevent engine, water pump and exhaust system damage. 
Diameter: 3", 2-1/2" male pipe thread.
Item#:
AQL13111
Manufacturer:
Aqualarm
106.4200
85.14
EACH
Call to Order

DETECTOR WATER FLOW 2" 10231

Cooling water flow detector
Cooling water flow detector. Monitors raw water flow. Sensor may activate audible or visual alarms (not included). Double-ended female pipe threads. Size: 2" diameter. Weight: 2 lbs.
Item#:
AQL200
Manufacturer:
Aqualarm
130.5200
104.42
EACH

SWITCH BILGE PUMP 12V 20035

12 volt bilge pump switch
Automatic bilge pump system. Sensor-activated bilge pumping system. Switches bilge pumps on and off. Pumps until job is done, then for 15 seconds to clear line. Warning light indicates when pumping is excessive. Handles pumps up to 30 amps. Easily connected with existing 12 volt systems. Weight: .5 lbs.
Item#:
AQL20035
Manufacturer:
Aqualarm
89.3600
71.48
EACH

BILGE PUMP COUNTER 20045

Bilge pump counter system
Bilge pump counter. Electronically counts number of times bilge pump is used. Bright LED digital readout with reset button. 1 second delay compensates for boat motion and waves. Features automatic/manual switch, "On" light, fuse holder. Use with Aqualarm smart bilge pump switch (part # 20038). Weight: .5 lbs.
Item#:
AQL20045
Manufacturer:
Aqualarm
75.3000
60.24
EACH

DETECTOR LOW OIL PRESS 20111

Low oil pressure detector
Low oil pressure detector sensor. Wired to activate alarm if oil pressure drops below 10 psi. Connects with 1/8" male thread. For use with 12 volt system. Weight: .1 lbs.
Item#:
AQL202
Manufacturer:
Aqualarm
30.1200
24.10
EACH
Includes wiring panel.
Monitors heat level.
Red light and buzzer when tripped, green for standby.
Set to activate at 135° F.
Item#:
AQL20230
Manufacturer:
Aqualarm
95.3800
76.30
EACH
Call to Order

ALARM EXHAUST BLACK 12V 20245

Engine exhaust alarm kit
Single engine exhaust alarm kit. Includes wet overheat detector, sensors, and wiring kit. Monitors exhaust temperature and activates alarm at 200 F. Helps prevent serious damage to your marine engine. For 12 volt electrical systems. Weight: 1 lb.
Item#:
AQL20245
Manufacturer:
Aqualarm
73.2900
58.63
EACH

PANEL EXHAUST BLACK 20251

Panel for engine exhaust alarm
Replacement panel for single engine exhaust alarm kit. Green light indicates power, red light indicates overheat. Monitors exhaust temperature and activates alarm at 200 F. Helps prevent serious damage to your marine engine. For 12 volt electrical systems. Weight: 1 lb.
Item#:
AQL20251
Manufacturer:
Aqualarm
35.1400
28.11
EACH

PANEL BILGE WARNING 4 COMP 12V

Bilge water warning panel
Shows which compartment has high water.
Has a loud buzzer and red warning light.
Dimensions: 3-5/16" X 3-3/4".
Item#:
AQL20362
Manufacturer:
Aqualarm
58.2300
46.59
EACH
Call to Order

PANEL BILGE WARNING 6 COMP 12V

Bilge water warning panel
Shows which compartments have high water. Has a loud buzzer and red warning light. Dimensions: 3-5/16" X 4-5/8". For 12 volt systems.
Item#:
AQL20364
Manufacturer:
Aqualarm
67.2700
53.81
EACH
Call to Order
Includes one panel and one bell.
Simple switch activates a loud bell in an emergency.
Panel measures 3" X 2".
12 volt.
Item#:
AQL20381
Manufacturer:
Aqualarm
89.3600
71.48
EACH
Call to Order

GENERAL ALARM KIT W/BELL 24V

General alarm kit - 24 volt
Includes panel and bell.
Simple on/off switch.
Panel measures 3" X 2".
Item#:
AQL20381-24
Manufacturer:
Aqualarm
89.3600
71.48
EACH
Call to Order

DETECTOR FIRE 135 DEGREE 20112

Remote fire detector - 135 F
Remote fire detector sensor. Activates at 135 degrees F. Compact size, easy two wire installation. Size: 2-1/2" diameter.
Item#:
AQL204
Manufacturer:
Aqualarm
74.0500
59.24
EACH

DETECTOR FIRE 190 DEGREE 20114

Remote fire detector - 190 F
Remote fire detector sensor. Activates at 190 degrees F. Compact size, easy two wire installation. Size: 2-1/2" diameter.
Item#:
AQL204A
Manufacturer:
Aqualarm
74.0500
59.24
EACH
Remote fire detection unit - 135°. Measures a combination of temperature and rate of rise. Normally open contacts. Compatible with any Aqualarm fire panel. Diameter: 5.25". Height: 2". Weight: 1 lb.
Item#:
AQL20512
Manufacturer:
Aqualarm
65.2600
52.21
EACH
Remote fire detection unit - 194°. Measures a combination of temperature and rate of rise. Normally open contacts. Compatible with any Aqualarm fire panel. Diameter: 5.25". Height: 2". Weight: 1 lb.
Item#:
AQL20514
Manufacturer:
Aqualarm
65.2600
52.21
EACH
Call to Order

DETECTOR WATER FLW 1-1/2 10271

Water detector sensor - 1-1/2"
Cooling water flow detector. Monitors raw water flow. Sensor may activate audible or visual alarms (not included). Double-ended female pipe threads. Size: 1-1/2" diameter. Weight: 2 lbs.
Item#:
AQL206
Manufacturer:
Aqualarm
120.4800
96.38
EACH

DETECTOR FOR BILGE WATER 20120

Bilge water level detector
Bilge water level detector. Sensor detects when water rises. Detector is able to activate visual/audio alarm. Designed to work with 12, 24, or 32 volt systems. Does not switch bilge pump on or off. Weight: .2 lbs.
Item#:
AQL208A
Manufacturer:
Aqualarm
47.1900
37.75
EACH

DETECTOR WATER FLOW 1" 10233

Water flow detector - 1"
Cooling water flow detector. Monitors raw water flow. Sensor may activate audible or visual alarms (not included). Double-ended female pipe threads. Size: 1" diameter. Weight: 2 lbs.
Item#:
AQL210
Manufacturer:
Aqualarm
120.4800
96.38
EACH

DETECTOR ENG TEMP - BOLT 20116

Bolt-on engine overheat sensor
Engine overheat detector, bolt-on style. Bolts to engine block or head. Activates alarm if water temperature exceeds 200 degrees F. Size: 3-1/4" X 1-3/4". Weight: 1 lb.
Item#:
AQL212
Manufacturer:
Aqualarm
29.1200
23.29
EACH

DETECTOR ENG TEMP - MPT 20118

Screw engine overheat sensor
Engine overheat detector, pipe-threaded style. Installs into 1/2" male pipe hole in engine block. Activates alarm if water temperature exceeds 200 degrees F. Weight: 1 lb.
Item#:
AQL212A
Manufacturer:
Aqualarm
35.1400
28.11
EACH
Voltage converter. 24 volt and 32 volt power conversion in a small wire assembly. Part number 29214. Weight: .1 lb.
Item#:
AQL29214
Manufacturer:
Aqualarm
9.9900
7.99
EACH
For 12 volt systems. Primarily used with alarms. Weight: .4 lbs.
Item#:
AQL70033
Manufacturer:
Aqualarm
52.2100
41.77
EACH
Call to Order

LIGHT STROBE AMBER 70035 12V

Strobe light - amber
Weatherproof marine design.
Impact resistant construction.
60,000 candle power brightness.
Operates at 12 volts DC, draws 115 mA.
Color: Amber.
Dimensions: 3-3/4" X 2-7/8".
Item#:
AQL70035
Manufacturer:
Aqualarm
52.2100
41.77
EACH

CONTROL BOARD 12V 20020

PC control board - 12 volt
PC control board. Interface for detectors with indicator panels or alarms. Required to create alarm circuits. Item number 20020. For 12 volt systems. Weight: 1 lb.
Item#:
AQL851
Manufacturer:
Aqualarm
86.3400
69.08
EACH

PANEL INDICATOR SNGL ENG 20030

Alarm visual indicator panel
Alarm system monitoring visual indicator panel. Five lights, with 10" connector cable. Includes wiring instructions/diagram. For use with single engine systems. Size: 3-1/2" X 4-5/8". Weight: 1 lb.
Item#:
AQL852
Manufacturer:
Aqualarm
38.1500
30.52
EACH

ALARM 12V SYSTEM SINGLE 20001

Automatic alarm system kit
Aqualarm automatic alarm system monitoring kit. Monitors oil pressure, engine temperature, bilge, and more. For use with single engine vessels. Loud (100db) bell or optional electronic horn alerts. Easy-to-read lighted panel for quick problem identification. Available for 12, 24, and 32 volt systems. Weight: 6 lbs.
Item#:
AQLASM12-S
Manufacturer:
Aqualarm
360.4400
288.35
EACH

ALARM 12V SYS TWIN 20003

Automatic alarm system kit
Aqualarm automatic alarm system monitoring kit. Monitors oil pressure, engine temperature, bilge, and more. For use with twin engine vessels. Loud (100db) bell or optional electronic horn alerts. Easy-to-read lighted panel for quick problem identification. Available for 12, 24, and 32 volt systems. Weight: 6 lbs.
Item#:
AQLASM12-T
Manufacturer:
Aqualarm
601.4000
481.12
EACH

ALARM 32V SYSTEM SINGLE 20012

Automatic alarm system kit
Aqualarm automatic alarm system monitoring kit. Monitors oil pressure, engine temperature, bilge, and more. For use with single engine vessels. Loud (100db) bell or optional electronic horn alerts. Easy-to-read lighted panel for quick problem identification. Available for 12, 24, and 32 volt systems.
Item#:
AQLASM32-S
Manufacturer:
Aqualarm
360.4400
288.35
EACH

ALARM HORN "BEEPER" 20106

Piezo alarm buzzer
Piezo alarm buzzer. Creates a loud 85 decibel buzzing tone. Compact design, can be used with any detector. Can be mounted flush on many surfaces. Available for 12, 24, or 32 volt systems. Weight: 2 lbs.
Item#:
AQLEA-12
Manufacturer:
Aqualarm
29.1200
23.29
EACH

ALARM 12V EXTRA LOUD 20107

Aqualarm 12 volt alarm siren
Alarm siren. Creates loud 125 decibel siren tones. Six selectable tone choices. Weather proof housing. Can be used with any detector. Weight: 2 lbs.
Item#:
AQLEA-12A
Manufacturer:
Aqualarm
56.2200
44.98
EACH
Call to Order

BELL ONLY RED 12V 20100

Standard alarm bell - 12 volt
Standard alarm bell. Produces a classic loud clanging alarm. Weatherpoof enamel and stainless steel construction. Ideal for marine environments. Easily connected to existing 12 volt systems. Color: red. Size: 6" diameter. Weight: 3 lbs.
Item#:
AQLRBA-12
Manufacturer:
Aqualarm
75.3000
60.24
EACH
Call to Order

BELL ONLY RED 32V 20102

Standard alarm bell - 32 volt
Standard alarm bell. Produces a classic loud clanging alarm. Weatherpoof enamel and stainless steel construction. Ideal for marine environments. Easily connected to existing 32 volt systems. Color: red. Size: 6" diameter. Weight: 3 lbs.
Item#:
AQLRBA-32
Manufacturer:
Aqualarm
80.3200
64.26
EACH
Call to Order

BILGE SYS RED BELL 12V 20131

Bilge level warning system
Bilge water level warning system. Uses a loud bell and red panel light to signal "High Water." Includes bell, bilge water level detector, and warning light Easily connected to 12 volt marine systems. Weight: 3 lbs.
Item#:
AQLRBWS-12
Manufacturer:
Aqualarm
106.4200
85.14
EACH

BILGE SYS RED BELL 32V 20133

Bilge level warning system
Bilge water level warning system. Uses a loud bell and red panel light to signal "High Water." Includes bell, bilge water level detector, and warning light Easily connected to 32 volt marine systems. Weight: 3 lbs.
Item#:
AQLRBWS-32
Manufacturer:
Aqualarm
115.4600
92.37
EACH
1 - 36 of 47 ▶|
View: