An optimized impeller gives great flow at low amperage.
A built-in thermal cut-off protects pump and vessel.
Backflow preventer helps keep bilges dryer and cleaner.
Completely submersible, rust and corrosion proof.
Cycles every 2.5 minutes.
Fully automatic, doesn't require float switch.
High efficiency, low amp motor
Quick-release strainer allows for easy cleaning.
Includes both straight and 90° port attachments.
12 volts DC.
Model number: 53S.
2000 GPH.

Bilge pump for larger boats. Rated for 1500 gallons per minute. Uses 1-1/8" hose. Meets USCG/ABYC standards. Equipped with a quick-release strainer base. Weight: 3.1 lbs.

Submersible bilge pump - 600 gallons per hour. Tough enough for any bilge. Built from impact resistant ABS. Stainless steel hardware and shaft. Strainer base is quick-release for easy cleaning. Hose: 3/4". Weight: .8 lb.

For use with Beckson 118P Thirsty-Mate hand pump.
Diameter: 1-1/4".

An optimized impeller gives great flow at low amperage.
A built-in thermal cut-off protects pump and vessel.
Backflow preventer helps keep bilges dryer and cleaner.
Completely submersible, rust and corrosion proof.
High efficiency, low amp motor.
Built-in strainer base snaps off for easy cleaning.
Includes both straight and 90° port attachments.
12 volts DC.
1-1/2" discharge outlet.
Model number: 13A.
3700 GPH.
Includes a five-year warranty from Xylem.

All plastic. Self lubricating, self-priming and very easy to clean. Will not rust or corrode. Will not mar boat. Length: 24".

An optimized impeller gives great flow at low amperage.
A built-in thermal cut-off protects pump and vessel.
Backflow preventer helps keep bilges dryer and cleaner.
Completely submersible, rust and corrosion proof.
Built-in strainer base snaps off for easy cleaning.
Includes both straight and 90° port attachments.
12 volts DC.
Model number: 27DA.
1100 GPH.

Great for evacuating small boats. Keep it on hand for emergencies. 36" long hose.

Self-priming hand pump.
Great for evacuating small boats.
Stash one in your canoe, kayak or dinghy.
Comes complete with a removable hose.

Sleek, reliable, and compact. Integrated switch. 12 volts. Rated for 800 GPH. Includes straight and 90° Dura-Port connectors. Has a removable nitrile check valve.

Reliable, rugged diaphragm pump. Portable, lightweight. Stainless steel and aluminum construction. Self-priming. Pumps up to 30 gallons per minute. Vertical handle orientation. Inlet / outlet diameter: 2".

An optimized impeller gives great flow at low amperage.
A built-in thermal cut-off protects pump and vessel.
Backflow preventer helps keep bilges dryer and cleaner.
Completely submersible, rust and corrosion proof.
Cycles every 2.5 minutes.
Fully automatic, doesn't require float switch.
High efficiency, low amp motor.
Built-in strainer base snaps off for easy cleaning.
Includes both straight and 90° port attachments.
12 volts DC.
1-1/2" discharge outlet.
Model number: 55S.
3700 GPH.

Dash alarm for Rule bilge pump.
12 volts.
Does not include bilge pump switch. 

Tournament series, high-capacity pump.
Rated for 1600 gallons per hour.
Bronze base.
1" ports.
12 volts.

Solid brass piston rod for strength & durability. Easily disassembled for cleaning. 1-1/2" barrel means quick pumpouts. 5 year warranty. Includes 24" of 1-1/8" black bilge flex hose.

Self-priming, very easy to clean.
Will not rust or corrode.
Length: 36".
1-3/4" diameter.
13 GPM pump rate.
Does not include a outlet hose.

An optimized impeller gives great flow at low amperage.
A built-in thermal cut-off protects pump and vessel.
Backflow preventer helps keep bilges dryer and cleaner.
Completely submersible, rust and corrosion proof.
High efficiency, low amp motor.
Built-in strainer base snaps off for easy cleaning.
Includes both straight and 90° port attachments.
12 volts DC.
1-1/8" discharge outlet.
Model number: 10-6UL.
2000 GPH.
Has 6-foot wire leads for easy installation.

Heavy-duty bilge pump. Liquid-cooled, 12-pole motor with double ball bearings. Stainless steel and strong plastic construction. Operates at 120 l/min, 1900 GPH. 4.5 amps, 6 amp fuze. 1-1/8" and 1-1/4" connectors.

An optimized impeller gives great flow at low amperage.
A built-in thermal cut-off protects pump and vessel.
Backflow preventer helps keep bilges dryer and cleaner.
Completely submersible, rust and corrosion proof.
High efficiency, low amp motor.
Built-in strainer base snaps off for easy cleaning.
Includes both straight and 90° port attachments.
24 volts DC.
1-1/8" discharge outlet.
Model number: 03.
1500 GPH.

All plastic. Self lubricating, self-priming and very easy to clean. Will not rust or corrode. Will not mar boat. Diameter: 1-3/4". Length: 36". Strokes per gallon: 4.

Reliable, rugged diaphragm pump.
Portable, lightweight.
All Delrin plastic construction.
Self-priming.
12 foot delivery suction lift.
Horizontal handle orientation.
Inlet / outlet diameter: 1".

Guzzler 450 hand pump, plus service kit. Reliable, lightweight hand pump for bilges. Durable and rugged for marine and industrial use. Can accommodate 1-1/4" to 2" hoses. Kit includes extra Buna-N diaphragm and flapper valves. Can move 10 gallons of liquid per minute.

Reliable, rugged diaphragm pump. Portable, lightweight. All Delrin plastic construction. Self-priming. 12 foot delivery suction lift. Horizontal handle orientation. Inlet / outlet diameter: 1-1/2".

Designed to be easy to mount and remove in tight spaces. Removable cartridge style. Uses easy-to-install Dura-Port discharge ports. Rated for 750 GPH. Dimensions: 5.75" X 3.2" X 2.82".

Sleek, reliable, and compact. Integrated switch. 12 volts. Rated for 600 GPH. Includes straight and 90° Dura-Port connectors. Has a removable nitrile check valve.

Guzzler 500 hand pump, with service kit. Reliable, lightweight hand pump for bilges. Durable and rugged for marine and industrial use. Can accommodate 1-1/4" to 2" hoses Kit includes extra Buna-N diaphragm and flapper valves. Can move 15 gallons of liquid per minute.

Designed for automatic operation with an Ultima switch. Rated for 500 GPH. Equipped with easy-to-install Dura-Port discharge ports. 3/4" fitting.

Sleek, reliable, and compact. Integrated switch. 12 volts. Rated for 1000 GPH. Includes straight and 90° Dura-Port connectors. Has a removable nitrile check valve.

"Full Stroke" Brass Bilge Pumps 7 13 3/4" 22 1/2" 1 3/4" 1" 4 High quality hand bilge pumps: brass cylinders & oil resistant plungers, intake & discharge caps. Includes adjustable mounting brackets for sufficient clearance to easily pump. Meets standards of portable hand bilge: CFR Tile 46, Chapter 1, Subchapter T, Subpart 182.25-10.

Jabsco 50880 shower drain / bilge pump. A single-diaphragm, 4.2 GPM plastic-body pump. Flexible installation, compact and simple design. Dry-running capability. Pump heads and ports may be rotated during installation. 12 volt.

21" with Float Solid brass piston rod for strength & durability. Easily disassembled for cleaning. 1-1/2" barrel means quick pumpouts. 5 year warranty, Includes 24" of 1-1/8" black bilge flex hose.

All plastic. Self lubricating, self-priming and very easy to clean. Will not rust or corrode. Will not mar boat. Length: 18". Diameter: 1-1/4". Strokes/Gal: 10.

High-capacity bilge pump, designed for the toughest applications.
An optimized impeller gives great flow at low amperage.
A built-in thermal cut-off protects pump and vessel.
Backflow preventer helps keep bilges dryer and cleaner.
Completely submersible, rust and corrosion proof.
Built-in strainer base snaps off for easy cleaning.
Includes both straight and 90° port attachments.
12 volts DC.
2" discharge outlet.
Model number: 56D.
Rated for 4000 GPH.