A compact pneumatic bladder tank for small water systems. Smoothes water flow and eliminates pulses. Pressurized tank is rated to 20 PSI. Mounts easily in any position. Includes snap-in barbed or threaded hose fittings. Diameter: 4-3/4" Height: 13-1/4".

Accumulator Tank Accumulator Tank Pneumatic accumulator tank for smooth flow from faucets & shower. Reduces pump cycling. Eliminates pulsations & water hammer. Water separated from air chamber by diaphragm & polypro tank liner. Tank volume: 2 gallons with working water volume of about 1 gallon. Mounts horizontally or vertically, even upside down. Port is 3/4" NPT (male). Includes brackets & band clamps. Pre-pressurized to 20 psi. Tank may be fine tuned to cut-in pressure of pump. Diameter: 8" (203mm). Height: 12 5/8" (320mm. Weight: 5 Lb. (2.3 kg). Max working pressure 100 PSI: (690 kPa).

Dimensions: L 16" W 12" H 8" Weight: 7 lb

High-density unbreakable polyethylene.
Reversible self-venting spout.
Color: Light blue.
Dimensions: 15-1/4" X 10-1/2" X 14-1/2".
Capacity: 5 gallon.

Torrid water heater replacement anode rod. Magnesium construction. Protects your water heater from rusting. For use with MV15, MV71, MH15, MH17. Size: 18". Weight: .76 lb.

Torrid water heater replacement anode rod. Magnesium construction. Protects your water heater from rusting. For use with MV6, MV10, MH6, MH10. Size: 12". Weight: .54 lb

Torrid water heater replacement anode rod. Magnesium construction. Protects your water heater from rusting. For use with MH30, MH40. Size: 24". Weight: 1 lb.

Gauge float assembly. For use with Moeller fuel tanks. Manufacturer number: 621001-10. Weight: .5 lb.

Used with water heaters.
Magnesium construction.
Dimensions: 6" X 3/4".

Designed for use in gasoline applications. All reed switch senders are pre-calibrated. Durable SS construction. Gasket and screws (5) included. 22".

Gauge float assembly - PBW 12. For use with Moeller fuel tanks. Manufacturer number: 621006-10. Weight: .4 lb.

Fuel cap with sight gauge and vent. Length: 12-1/4".

Built from stainless steel and sturdy plastic. Features dual-heating design, both electrical and indirect. Thermostat is fully adjustable for safety. Uses polyurethane foam heat insulation. 5.81 gallon capacity, 1200 watts. For 120 volt systems.

Marine-grade aluminum alloy.
Side mount, with a front heat exchange
120 volt.
Capacity: 6 gal
Dimensions: 15.63" X 13.63" X 19.38"

Marine-grade aluminum alloy.
Side mount, with a front heat exchange.
120 volt, 1500 watt.
Capacity: 11 gal.
Dimensions: 16.13" X 21.63" X 16.13".

Direct sight gauge. Gathers fuel level information with the float. Accurate gauge will fluctuate as the fuel "sloshes". Length: 7-1/2".

Gathers fuel level information. Connects to dash mounted gauge without a conversion capsule. Measure tank depth and make the swingarm the correct length. Internal components will not rust or corrode. Float rotates easily in 90° increments. For 6" to 12" deep tanks.

Direct sight gauge. Gathers fuel level information with the float. Accurate gauge will fluctuate as the fuel "sloshes". Length: 17-3/4".

Direct-sight mechanical tank sending unit.
A replacement fuel gauge.

Gathers fuel level information. Connects to dash mounted gauge without a conversion capsule. Measure tank depth and make the swingarm the correct length. Internal components will not rust or corrode. Float rotates easily in 90° increments. For 12" to 24" deep tanks.

Direct sight gauge. Gathers fuel level information with the float. Accurate gauge will fluctuate as the fuel "sloshes". Length: 22".

2 stage self-venting cap.
Designed for easy and stable storage, even in tight places.
EPA-compliant; meets ABYC/NMMA/CARB requirements.
Capacity: 9 gallons.

Built from polyethylene plastic.
Ideally suited for gasoline and diesel use.
Dimensions: 54" X 32" X 21.25".
Capacity: 126 gallons.

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Hardware for installing Moeller fuel tanks. Includes: - Fill hose - Vent hose - Thru hull - Deck plate fuel fill - Hose clamps.

SecureStack fuel tank - 6 gallon. "An innovative tank for today' boater." Ergonomic-designed, stackable, EPA compliant. The answer to your fuel handling problems.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.  Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Fuel tank tie-down strap kit. Includes: - Two 68" nylon straps - Four stainless steel tie-downs - Eight stainless steel mounting screws. Weight: .2 lb.

Moeller withdrawal assembly - PBW 12. For use with Moeller fuel tanks. Manufacturer number: 621007-10. Weight: .4 lb.

Withdrawal assembly for Moeller fuel tanks. For use with 12 gallon units. Model number: 031005-10. Weight: .4 lb.

Polyethylene tank used for both gas and diesel 3/8" withdraw fitting that rotates 360°. Dimensions: 47" X 10.25" X 10.19". Capacity: 19 gallons. NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.  Please contact Seattle Marine at 1-800-426-2783 for shipping options.

40 gallon permanent fuel tank. Rotationally molded, cross-linked polyethylene plastic. Aluminum 3/8" withdraw fitting provides 360-degree rotation. Conforms to all ABYC, NMMA and USCG regulations. Dimensions: 26" X 20-1/2" X 18-1/2".  NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.  Please contact Seattle Marine at 1-800-426-2783 for shipping options.