Same pump used in Jabsco multi-engine oil change system Can change oil in a typical V-8 in minutes 3/8" NPT male threaded Dimensions: 7-1/8"L x 3-3/4"W

Operates by the rotary sliding vane principle Has vectra rotor and vanes that are designed to handle oil or diesel fuel transfer Pumps up to 5-1/2 GPM and transfers diesel fuel from a 55 gallon drum in 10 minutes Self-priming to 3 feet - Low amp draw Vane Puppies are equipped with a high torque motor with ball type shaft bearings Rated for continuous duty operation Bronze pump has ports with 1/2" internal pump thread 1" external hose barb Also supplied are port adaptors for 3/4" gallon hose thread. Weight: 6.4 lbs

Hand operated drum pump, for fuel oil, includes pump, suction tube, 8 feet discharge hose & bung adapter, approximately 28 ounces per pump cycle.
A double-acting piston pump.
Chemically resistant.
All internal metal parts in contact with the liquid are made of stainless steel.
N-Gasket: Cork/nitrile.
Discharge hose: 8' EPDM with polyester elbow and nozzle.
Suction tube: 2 piece 1" polyester, 34" long with Teflon tape
1" suction, 3/4" discharge.

For quick, easy and clean oil changes.
Includes dipstick probe and a female garden hose connector.
Reversible flow.
12 volt model with 8' cord and alligator clips.

Johnson gear pump with oil change kit. A light, compact oil change pump. Features: - PTFE body and gears - Oil dip stick extraction tube - Self-priming - 8 liter per minute capacity. Size: 5.5" X 3.14".

Permanent Oil Drain Hose & Fitting Oil Drain Hose Kit Assembly
Includes drain plug fitting, oil drain hose, and cap/hose hanger clamp.
Oil drain kit: use in conjunction with Jabsco drill pump, model 17215-0000, or PAR hand pump, model 34060-0010.
Drain plug fitting size is 1/2"- 20". Packed in poly bag with display header card. Not recommended for autos with drain plugs exposed

Johnson gear pump. A light, compact oil change pump. Features: - PTFE body and gears - Self-priming - 8 liter per minute capacity. Size: 5.5" X 3.14". Weight: 2.5 lb.

Oil-resistant construction.
Simple to use for DIY boat owners.
Container is 3.5 gallons.
Includes 8 feet of suction tubing.
12 volt DC.

"Flat tank" design makes it easy to change your engine oil. Compact, strong and easy to store when not in use. Equipped with a self-priming, run-dry pump. 3.5 gallon capacity. Includes: - Tank with easy-pour spout - 12 volt diaphragm pump - Dipstick-style suction tube - Battery clamp wire leads.

Designed to handle large fluid extraction applications. Ideal for removing stagnent bilge fluids. Dual-action pump works on both upstroke and downstroke. Equipped with an automatic shut-off valve to stop overflow. Tethered cap, easy-pour spout prevents messes. Capacity: 7 liters.

Uses: Transferring diesel fuel or pumping light oil Vectra rotor and vanes are not affected by petroleum products; pump head is corrosion-resistant bronze. Self-priming up to 5 ft. and delivers up to 8-1/2 GPM Empties a 55 gallon drum in less than 7 minutes Ports: 1/2" internal pipe threads, 1" external hose barb, includes 3/4" external garden hose adaptors High speed motor is thermally protected, complete with 6 ft. power cord. Dimensions: 5-3/4"H x 5-5/8"W x 9-1/2" L Weight: 19.1 lbs

Self-priming drill pump chucks into a standard 1/4" drill motor and pumps up to 3 1/2 GPM (13 L/min). Use for draining engine oil through dipstick tube, pumping, and scavenging jobs, many uses around boat or home. Includes two 3/4" (19mm) garden hose port adaptors mounted on 1/2" barbed port. Weight: .36 lb

A compact multi-purpose hand pump kit. Great for many draining and liquid transfer jobs. Small enough to fit in a tool or tackle box. Includes: - Pump - 2" hose - Draw tube for draining crankcases.

Sliding Vane Diesel Pump VR050 Diesel Refueling 24V 1" 1" Hose 5-1/4" 5" 8-1/2" 11 Lbs. Continuously rated diesel pump - 13.7 GPM at 10 ft. total head. Self priming up to 9.6 ft. vertical lift. Optional fitted switch, fuse & ports. 22° F to 104° F operating temp range.

Rated for 13 gallons per minute. Self-priming from up to 7.8 feet. 1" hose barb ports. 12 volts.

Ideal for transferring diesel fuel. Self-priming to about 3 feet. Can pump against a discharge head up to 20 feet. Ideal for moving fuel between port and starboard fuel tanks. 12V DC.

Fuel pump made by Walbro for Dickinson stoves. 2-3.5 psi fuel pump. Use for fuel transfer to day tank or supply to Dickinson stoves or heaters. Part # 20-000. Weight: 3 lbs.

Fuel pump made by Walbro for Dickinson stoves. 2-3.5 psi fuel pump with regulator. Adjustable pressure, standard 12V. Use for fuel transfer to day tank or supply to Dickinson stoves or heaters. Part # 20-002.

Quick, easy and clean oil changes at flip of a switch Removes oil/sludge through dip stick tube so engine oil changes quick and easy. No spill under engine. Oil changer supplied with both 1/4" x 40" dipstick probe and a female garden hose connector that attaches suction hose directly to dipstick tubes supplied with male garden hose threads. Reversible pump so container is emptied neatly/easily by reversing flow direction. Retractable pouring spout if not desirable to use pump for emptying. 12 volt model with 8' cord and alligator clips. Simply connect power cord to appropriate electrical source. With flick of switch sturdy motor pump unit drains crankcase into its 14 qt. holding container. Dimensions: Height 13-5/8", Width 13-1/2" 
 

Includes: - 3 feet of 1/2" hose - Probe adaptor - 1/4" X 40" dipstick probe - Utility pump. Kit has same utility pump as 17250-0003. Packed in poly bag with display header card.

Lever-action pump.
Has a telescoping suction tube that fits 30-55 gallon drum.
Discharge spout has standard garden hose thread.
All steel foot valve and piston valve.

Designed to handle large fluid extraction applications. Ideal for removing stagnent bilge fluids. Dual-action pump works on both upstroke and downstroke. Equipped with an automatic shut-off valve to stop overflow. Tethered cap, easy-pour spout prevents messes. Capacity: 5 liters.