Moeller low-permeation fuel line assembly - 3/8". Meets EPA requirements for fuel lines. Solid hydrocarbon and solvent resistant construction. Dual internal check valves ensure a rapid prime. while ensuring that there is no fuel flowback Includes primer bulb, clamps, and hardware. Uses O-rings on all fittings to prevent leaks. Moeller item number 03488-10. Intended for use with 3/8" lines. For use with Mercury motors. Weight: 1 lb.

Designed to handle large fluid extraction applications. Ideal for removing stagnent bilge fluids. Dual-action pump works on both upstroke and downstroke. Equipped with an automatic shut-off valve to stop overflow. Tethered cap, easy-pour spout prevents messes. Capacity: 7 liters.

Non-fading and long-lasting. Designed to fight rust. Has excellent adhesion to paintable surfaces. Resists solvents and gasoline. 12 oz. aerosol can. Color: Olive drab camouflage.

Self-priming, quick-dry formula. Designed to withstand up to 1200° F. 12 oz. aerosol can. Color: High heat white.

Total engine coverage using quick drying engine paint. Heat and solvent resistant acrylic lacquer. Gives the extended staying power boat engines need. Color matched to engines original color. For outboard/inboard engines, stern drive, and lower units. 12 oz. aerosol can. Color: Volvo metallic silver.

Total engine coverage using quick drying engine paint. Heat and solvent resistant acrylic lacquer. Gives the extended staying power boat engines need. Color matched to engines original color. For outboard/inboard engines, stern drive, and lower units. 12 oz. aerosol can. Color: Shadow black.

Replacement glass for in-line fuel filter. Clear for easy inspection. Filter traps dirt and metallic particles.

2 stage self-venting cap.
Designed for easy and stable storage, even in tight places.
EPA-compliant; meets ABYC/NMMA/CARB requirements.
Capacity: 9 gallons.

Built from polyethylene plastic.
Ideally suited for gasoline and diesel use.
Dimensions: 54" X 32" X 21.25".
Capacity: 126 gallons.

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Gauge float assembly. For use with Moeller fuel tanks. Manufacturer number: 621001-10. Weight: .5 lb.

No tools required. Easy to use. For flushing inboard motors.

Cam-action plug gives a very tight seal. Will not jar loose under vibration. Corrosion-resistant. For use with drain tubes. Diameter: 1".

Hardware for installing Moeller fuel tanks. Includes: - Fill hose - Vent hose - Thru hull - Deck plate fuel fill - Hose clamps.

Total engine coverage using quick drying engine paint. Heat and solvent resistant acrylic lacquer. Gives the extended staying power boat engines need. Color matched to engines original color. For outboard/inboard engines, stern drive, and lower units. 12 oz. aerosol can. Color: Yamaha dark blue metallic (1994 - 1997).

Total engine coverage using quick drying engine paint. Heat and solvent resistant acrylic lacquer. Gives the extended staying power boat engines need. Color matched to engines original color. For outboard/inboard engines, stern drive, and lower units. 12 oz. aerosol can. Color: Honda Oyster silver metallic.

Total engine coverage using quick drying engine paint. Heat and solvent resistant acrylic lacquer. Gives the extended staying power boat engines need. Color matched to engines original color. For outboard/inboard engines, stern drive, and lower units. 12 oz. aerosol can. Color: Volvo I/O gray (1989 - 2004).

Total engine coverage using quick drying engine paint. Heat and solvent resistant acrylic lacquer. Gives the extended staying power boat engines need. Color matched to engines original color. For outboard/inboard engines, stern drive, and lower units. 12 oz. aerosol can. Color: OMC Cobra charcoal metallic.

Total engine coverage using quick drying engine paint. Heat and solvent resistant acrylic lacquer. Gives the extended staying power boat engines need. Color matched to engines original color. For outboard/inboard engines, stern drive, and lower units. 12 oz. aerosol can. Color: Volvo green.

Total engine coverage using quick drying engine paint. Heat and solvent resistant acrylic lacquer. Gives the extended staying power boat engines need. Color matched to engines original color. For outboard/inboard engines, stern drive, and lower units. 12 oz. aerosol can. Color: Yamaha blue metallic (1985 - 1990).

Total engine coverage using quick drying engine paint. Heat and solvent resistant acrylic lacquer. Gives the extended staying power boat engines need. Color matched to engines original color. For outboard/inboard engines, stern drive, and lower units. 12 oz. aerosol can. Color: Johnson / Evinrude white (1972 - 2004).

Total engine coverage using quick drying engine paint. Heat and solvent resistant acrylic lacquer. Gives the extended staying power boat engines need. Color matched to engines original color. For outboard/inboard engines, stern drive, and lower units. 12 oz. aerosol can. Color: Johnson / Evinrude light metallic blue.

Total engine coverage using quick drying engine paint. Heat and solvent resistant acrylic lacquer. Gives the extended staying power boat engines need. Color matched to engines original color. For outboard/inboard engines, stern drive, and lower units. 12 oz. aerosol can. Color: Johnson white.

Total engine coverage using quick drying engine paint. Heat and solvent resistant acrylic lacquer. Gives the extended staying power boat engines need. Color matched to engines original color. For outboard/inboard engines, stern drive, and lower units. 12 oz. aerosol can. Color: OMC White (1964 - 1976).

Automatic flapper design. Will allow water to drain from hull when boat is under way. Watertight seal when boat is stopped. Flexible neoprene plug inserts in transom drain hole. Fits 1" standard drains to 2-1/4" thick transoms. Weight: .3 lb.

Replacement EPA-compliant fuel cap. 
Audible "click when closed" 2-stage seal. 
Has integrated tether and 2-stage venting mechanism.

For use with Moeller below deck fuel tanks. Weight: .5 lb.

Built to strict OEM standards. Designed for use with Yamaha outboard systems. Attaches to the fuel hose on the engine side. Size: 5/16".

Total engine coverage using quick drying engine paint. Heat and solvent resistant acrylic lacquer. Gives the extended staying power boat engines need. Color matched to engines original color. For outboard/inboard engines, stern drive, and lower units. 12 oz. aerosol can. Color: Gloss black.

Matched to your engine's original color. Formulated for the marine environment. Use on all outboard/inboard engines, stern drives. Oil and gasoline resistant. Quick dry formula. 12 oz. aerosol can. Color: Neptune flat black.

Moeller withdrawal assembly - PBW 12. For use with Moeller fuel tanks. Manufacturer number: 621007-10. Weight: .4 lb.

Cam-action plug gives a very tight seal. Will not jar loose under vibration. Corrosion-resistant. For use with drain tubes. Diameter: 1". Display of 50 plugs.

Withdrawal assembly for Moeller fuel tanks. For use with 12 gallon units. Model number: 031005-10. Weight: .4 lb.

Flanging tool. For drain tubes with 1-1/4" OD. Weight: .5 lb.