Vernier cable only.
Great for throttles or other applications where
precise control is desired.
Bare conduit at output end with a .075 stainless
steel wire.
For use with MOR371310 vernier control head.
Length: 5 feet.

Replacement 33C 3300 red jacket control cable.
Stainless steel rods, hubs, and end fittings.
10-32 threaded ends, 3" covered core wires.
UV resistant polyethylene outer jacket.
Replaces your Morse 33C control cable.
Size: 17 feet.

Replacement 33C 3300 red jacket control cable.
Stainless steel rods, hubs, and end fittings.
10-32 threaded ends, 3" covered core wires.
UV resistant polyethylene outer jacket.
Replaces your Morse 33C control cable.
Size: 13 feet.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 6'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 9'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 30'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 27'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 22'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 17'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 11'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 19'.

Model CCX430. Standard replacement 4300/43 type cable With bulkhead and clamp fitting 4300/43BC type 1/4-28 threaded end. Old cable part number CC692. Length: 312" (26 feet).

Model CCX430. Standard replacement 4300/43 type cable With bulkhead and clamp fitting 4300/43BC type 1/4-28 threaded end. Old cable part number CC692. Length: 288" (24 feet).

Model CCX430. Standard replacement 4300/43 type cable With bulkhead and clamp fitting 4300/43BC type 1/4-28 threaded end. Old cable part number CC692. Length: 336" (28 feet).

Gives high performance with minimal backlash. Uses a unique splined core wire for smooth control. 4" minimum bend radius, 10-32 threaded ends. Replaces all universal type (33 series) control cables. Size: 324" (27 feet).

Gives high performance with minimal backlash. Uses a unique splined core wire for smooth control. 4" minimum bend radius, 10-32 threaded ends. Replaces all universal type (33 series) control cables. Size: 336" (28 feet).

Gives high performance with minimal backlash. Uses a unique splined core wire for smooth control. 4" minimum bend radius, 10-32 threaded ends. Replaces all universal type (33 series) control cables. Size: 696" (58 feet).

Gives high performance with minimal backlash. Uses a unique splined core wire for smooth control. 4" minimum bend radius, 10-32 threaded ends. Replaces all universal type (33 series) control cables. Size: 648" (54 feet).

Gives high performance with minimal backlash. Uses a unique splined core wire for smooth control. 4" minimum bend radius, 10-32 threaded ends. Replaces all universal type (33 series) control cables. Size: 672" (56 feet).

Gives high performance with minimal backlash. Uses a unique splined core wire for smooth control. 4" minimum bend radius, 10-32 threaded ends. Replaces all universal type (33 series) control cables. Size: 744" (62 feet).

Gives high performance with minimal backlash. Uses a unique splined core wire for smooth control. 4" minimum bend radius, 10-32 threaded ends. Replaces all universal type (33 series) control cables. Size: 768" (64 feet).

Gives high performance with minimal backlash. Uses a unique splined core wire for smooth control. 4" minimum bend radius, 10-32 threaded ends. Replaces all universal type (33 series) control cables. Size: 720" (60 feet).

Gives high performance with minimal backlash. Uses a unique splined core wire for smooth control. 4" minimum bend radius, 10-32 threaded ends. Replaces all universal type (33 series) control cables. Size: 576" (48 feet).

Gives high performance with minimal backlash. Uses a unique splined core wire for smooth control. 4" minimum bend radius, 10-32 threaded ends. Replaces all universal type (33 series) control cables. Size: 624" (52 feet).

Gives high performance with minimal backlash. Uses a unique splined core wire for smooth control. 4" minimum bend radius, 10-32 threaded ends. Replaces all universal type (33 series) control cables. Size: 816" (68 feet).

Gives high performance with minimal backlash. Uses a unique splined core wire for smooth control. 4" minimum bend radius, 10-32 threaded ends. Replaces all universal type (33 series) control cables. Size: 840" (70 feet).

Fits Mercury/Mercruiser motors from 1965 to current. Also fits Force motors 1993 to current. Stainless steel, brass and plastic construction.
8" minimum bend radius. Black UV-resistant polyethylene cover. Length: 30 feet.

Fits BRP/OMC/Johnson/Evinrude controls, 1979 to current. Also fits OMC Turbo Jets with OMC side mount controls. Stainless steel, brass and plastic construction. 8" minimum bend radius. Length: 28 feet.

Fits BRP/OMC/Johnson/Evinrude controls, 1979 to current. Also fits OMC Turbo Jets with OMC side mount controls. Stainless steel, brass and plastic construction. 8" minimum bend radius. Length: 20 feet.

Fits BRP/OMC/Johnson/Evinrude controls, 1979 to current. Also fits OMC Turbo Jets with OMC side mount controls. Stainless steel, brass and plastic construction. 8" minimum bend radius. Length: 26 feet.

Fits BRP/OMC/Johnson/Evinrude controls, 1979 to current. Also fits OMC Turbo Jets with OMC side mount controls. Stainless steel, brass and plastic construction. 8" minimum bend radius. Length: 24 feet.

Fits BRP/OMC/Johnson/Evinrude controls, 1979 to current. Also fits OMC Turbo Jets with OMC side mount controls. Stainless steel, brass and plastic construction. 8" minimum bend radius. Length: 30 feet.

Fits BRP/OMC/Johnson/Evinrude controls, 1979 to current Also fits OMC Turbo Jets with OMC side mount controls. Stainless steel, brass and plastic construction. 8" minimum bend radius. Length: 17 feet.

Fits BRP/OMC/Johnson/Evinrude controls, 1979 to current. Also fits OMC Turbo Jets with OMC side mount controls. Stainless steel, brass and plastic construction. 8" minimum bend radius. Length: 18 feet.

Fits BRP/OMC/Johnson/Evinrude controls, 1979 to current. Also fits OMC Turbo Jets with OMC side mount controls. Stainless steel, brass and plastic construction. 8" minimum bend radius. Length: 11 feet.

Fits BRP/OMC/Johnson/Evinrude controls, 1979 to current. Also fits OMC Turbo Jets with OMC side mount controls. Stainless steel, brass and plastic construction. 8" minimum bend radius. Length: 12 feet.