Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22
View:
Watertight PVC construction. Features a snap-together design. For use in wet or damp locations. Includes a standard 1/4" X 1-1/4" glass fuse. 10 gauge wire. 30 amps. Display packaged.
Item#:
SDG420555-1
Manufacturer:
Sea-Dog Corp
Available:
In Stock
15.9600
Your Price:
11.33
EACH
Watertight PVC construction. Features a snap-together design. For use in wet or damp locations. Includes a standard 1/4" X 1-1/4" glass fuse. 8 gauge wire. 50 amps. Display packaged.
Item#:
SDG420557-1
Manufacturer:
Sea-Dog Corp
Available:
Out of Stock
20.4600
Your Price:
14.53
EACH
Call to Order
ANL fuse holder
Marinco compact ANL fuse holders offer unparalleled circuit protection for small electrical loads.
Specifications:
- cable connection studs: shared 5/16".
- double washers allow any ANL fuse brand to be fitted
- fuse type: ANL or ANN (fast blow)
- swinging fuse style allows changing fuse without removal of fastening nuts
- amperage: 35-300A
- 50 VDC (or determined by fuse fitted).
Dimensions: 3.9" x 1.9" x 2.1".
Item#:
MRN778-ANL
Manufacturer:
Marinco, Ancor, Guest, BlueSea
Available:
In Stock
44.1800
Your Price:
35.34
EACH
ST blade fuse block with 6 independent circuits.
Corrosion resistant, tin-plated copper fuse clips reduce heat and improve the efficiency of the electrical system.
Clear insulating cover with label recesses accepts small format labels.
Spare fuse holder in cover. Fuses sold separately.
Accepts ring or snap fork type terminals.
Includes two terminal block jumpers.
Maximum amperage 30A per circuit; 40A per jumped circuit group.
Maximum voltage: 32V DC.
Item#:
BLS5035
Manufacturer:
Marinco, Ancor, Guest, BlueSea
Available:
In Stock
58.6300
Your Price:
46.91
EACH
ST blade fuse block.   
Positive distribution bus with #10-32 stud.  
Can be used for 24-hour circuits.  
Tin-plated copper buses and fuse clips.
Accepts ring or spade type terminals.
Accepts ATO and ATC fast acting blade fuses.
6 circuits, maximum 100A per block, maximum 30A per circuit.
Maximum voltage: 32V DC.
Fuses sold separately.
Item#:
BLS5033
Manufacturer:
Marinco, Ancor, Guest, BlueSea
Available:
In Stock
54.4700
Your Price:
43.57
EACH
Split bus fuse block with ground for use when a mix of switched and 24-hour circuits are desired in the same block.
Provides two isolated groups of six ATO®/ATC® circuits.
For use with either two isolated batteries or with a single battery providing a mix of 24 hour and switched circuits.
Screw terminals for securing wires accept ring terminals.
One-piece stainless flange nuts ensure safe and secure connections.
Clear insulating cover with label recesses and storage for two fuses, satisfies ABYC/USCG insulation requirements.
Easy to open, push button latch for easy access to fuses.
Tin-plated copper buses and fuse clips.
Fuses sold separately.
Maximum amperage: 30A per circuit; 100A total.
Maximum voltage: 32 volts DC.
Item#:
BLS5032
Manufacturer:
Marinco, Ancor, Guest, BlueSea
Available:
In Stock
107.0800
Your Price:
85.66
EACH
Fuse holder with buss bar
Six terminals. Takes standard 1/4" fuses. Dimensions: 2-7/16" X 4-1/2". Rated for 20 amps, 12 volts. Display packaged.
Item#:
SDG420526-1
Manufacturer:
Sea-Dog Corp
Available:
Out of Stock
24.6000
Your Price:
17.47
EACH
Call to Order
For ATO/ATC style fuses.
LED indicator lights up when the fuse is blown.
IP67 waterproof rating.
Item#:
SDG445197-1
Manufacturer:
Sea-Dog Corp
Available:
In Stock
9.9800
Your Price:
7.09
EACH
For ATM mini style fuses.
LED indicator lights up when fuse is blown.
IP67 waterproof rating.
Maximum amps: 30.
Has 14 gauge wire ends, 12" on each side.
Item#:
SDG445097-1
Manufacturer:
Sea-Dog Corp
Available:
In Stock
8.9600
Your Price:
6.36
EACH
In-line dual fuse holder
Watertight PVC construction. Features a snap-together design. For use in wet or damp locations. Case is designed to hold a spare fuse. Includes two standard 1/4" X 1-1/4" glass fuses. 14 gauge wire. 15 amps. Display packaged.
Item#:
SDG420563-1
Manufacturer:
Sea-Dog Corp
Available:
Out of Stock
12.5800
Your Price:
8.93
EACH
Call to Order
Fuse holder with push-in cap
Panel mounted AGC fuse holder provides over-current protection in electrical circuits.
Side release solder terminal.
Accepts standard 1/4" x 1-1/4" AGC style fuse sold separately.
Maximum 10A @ 12VDC.
Constructed of molded Bakelite with stamped brass contacts and push-in cap.
Item#:
SDG420501-1
Manufacturer:
Sea-Dog Corp
Available:
In Stock
6.0500
Your Price:
4.30
EACH
Fuse holder with screw-on cap
Panel mounted AGC fuse holder provides over-current protection in electrical circuits.
Solder terminal.
Accepts standard 1/4" x 1-1/4" AGC style fuses sold separately.
Maximum 15A @ 12VDC.
Constructed of molded Bakelite with stamped brass contacts and a screw-on cap.
Display packaged.
Item#:
SDG420502-1
Manufacturer:
Sea-Dog Corp
Available:
Out of Stock
4.1900
Your Price:
2.98
EACH
Call to Order
Inline fuse holder
In-line fuse holder provides over-current protection in a convenient push together in-line holder.
Install by cutting the 11-1/2" wire lead and stripping both ends.
Constructed of injection molded nylon with a 14 gauge wire lead.
Accepts standard 1/4" x 1-1/4" AGC style fuse.
Maximum 20 amps @ 12VDC.
Includes a 20 amp AGC fuse.
DP - display packed.

Item#:
SDG420500-1
Manufacturer:
Sea-Dog Corp
Available:
In Stock
5.5800
Your Price:
3.96
EACH
Fuse holder - round, with cap
Brass and Bakelite construction. Flush cap. Marked "FUSE". 10 amps, 12 volts. Display packaged.
Item#:
SDG420504-1
Manufacturer:
Sea-Dog Corp
Available:
In Stock
4.9000
Your Price:
3.48
EACH
Fuse holder - spade terminal
Panel mounted AGC fuse holder provides over-current protection in electrical circuits.
Spade terminal.
Accepts standard 1/4" x 1-1/4" AGC style fuses sold separately.
Maximum 15A @ 12VDC.
Constructed of molded Bakelite with stamped brass contacts and a screw-on cap.
Display packaged.
Item#:
SDG420503-1
Manufacturer:
Sea-Dog Corp
Available:
Out of Stock
4.9000
Your Price:
3.48
EACH
Call to Order
225-400 amps Pro Installer Class-T fuse holder. 
Class-T fusing provides the ultimate protection for high power circuits, and where extremely fast fuse blow characteristics are required. 
Specifications:
- cable connection studs: 3/8" 
- fuse mounting studs: 3/8" 
- fuse type: Class-T (JLLN / TJN / A3T)
- 50V DC
- high temperature, fiber reinforced plastic base provides strength and chemical resistance;
  clear polycarbonate cover
- tinned CDA102 copper conductors
- stainless steel studs, washers and nuts for longevity in the marine environment.
Dimensions: 5.8" x 1.9" x 2.4".
Item#:
MRN778-T2S400
Manufacturer:
Marinco, Ancor, Guest, BlueSea
Available:
In Stock
89.7400
Your Price:
71.79
EACH
Fuse holder with buss bar
Nine terminals. Takes standard 1/4" fuses. Dimensions: 2-7/16" X 6-3/4". Rated for 20 amps, 12 volts. Display packaged.
Item#:
SDG420529-1
Manufacturer:
Sea-Dog Corp
Available:
Out of Stock
23.6800
Your Price:
16.82
EACH
This item is discontinued
Inline Fuse Holder
ATO/ATC in-line fuse holder is designed to accept ATO/ATC fuses.
Maximum: 30A.
14 gauge 4" AWG wire lead.
Constructed of injection molded, fiberglass reinforced nylon.
Fuse sold separately.
Item#:
SDG445199-1
Manufacturer:
Sea-Dog Corp
Available:
In Stock
6.0500
Your Price:
4.30
EACH
Designed for automotive-style spade terminal fuses.
12 gauge 12" AWG wire lead.
Maximum: 30 amps.
IP67 waterproof rating.
Item#:
SDG445198-1
Manufacturer:
Sea-Dog Corp
Available:
In Stock
6.6500
Your Price:
4.72
EACH
Molded Plastic Rated for 20 Amps at 12, 24 and 32 Volts for 1/4" 1-1/4" Fuses 12 Volt, 20 Amp Fuse and 7-1/2 Inch Wire Lead Included Weight: .0469 lb
Item#:
PRK786DP
Manufacturer:
Perko
Available:
In Stock
19.2000
Your Price:
16.32
EACH
Inline fuse holder
In-line fuse holder provides over-current protection in a convenient push together in-line holder.
Install by cutting the 11-1/2" wire lead and stripping both ends.
Constructed of injection molded nylon with a 14 gauge wire lead.
Accepts standard 1/4" x 1-1/4" AGC style fuse.
Maximum 20 amps @ 12VDC.
Includes a 20 amp AGC fuse.
Item#:
SDG420500
Manufacturer:
Sea-Dog Corp
Available:
In Stock
3.2800
Your Price:
2.33
EACH
ATM style inline fuse holder.
Designed for mini automotive-style spade terminal fuses.
12 gauge 12" AWG wire lead.
Maximum: 30 amps.
IP67 waterproof rating.
Item#:
SDG445098-1
Manufacturer:
Sea-Dog Corp
Available:
In Stock
6.7600
Your Price:
4.80
EACH
In-line dual fuse holder
Watertight PVC construction. Features a snap-together design. For use in wet or damp locations. Case is designed to hold a spare fuse. Includes two standard 1/4" X 1-1/4" glass fuses. 16 gauge wire. 10 amps. Display packaged.
Item#:
SDG420562-1
Manufacturer:
Sea-Dog Corp
Available:
Out of Stock
14.4400
Your Price:
10.25
EACH
Call to Order
In-line dual fuse holder
Watertight PVC construction. Features a snap-together design. For use in wet or damp locations. Case is designed to hold a spare fuse. Includes two standard 1/4" X 1-1/4" glass fuses. 10 gauge wire. 30 amps. Display packaged.
Item#:
SDG420565-1
Manufacturer:
Sea-Dog Corp
Available:
Out of Stock
15.9600
Your Price:
11.33
EACH
Call to Order
Watertight PVC construction. Features a snap-together design. For use in wet or damp locations. Includes a standard 1/4" X 1-1/4" glass fuse. 16 gauge wire. 10 amps. Display packaged.
Item#:
SDG420552-1
Manufacturer:
Sea-Dog Corp
Available:
In Stock
11.4000
Your Price:
8.09
EACH
In-line dual fuse holder
Watertight PVC construction. Features a snap-together design. For use in wet or damp locations. Case is designed to hold a spare fuse. Includes two standard 1/4" X 1-1/4" glass fuses. 12 gauge wire. 20 amps. Display packaged.
Item#:
SDG420564-1
Manufacturer:
Sea-Dog Corp
Available:
Out of Stock
15.5600
Your Price:
11.05
EACH
Call to Order
This innovative, through-panel mounting fuse holder offers the user easy visual inspection of fuse state, and easy/safe access to change fuses if blown.
Provides high-capacity fusing, fast response, high interrupt ratings, and is ideal for protecting today's demanding onboard power electronics technology including inverters and battery chargers. 
Specifications:
- cable mounting studs: 3/8"
- fuse mounting studs: 5/16"
- double washers allow any ANL fuse brand to be fitted
- fuse type: ANL or ANN (fast blow)
- swinging fuse style allows changing fuse without removal of fastening nuts
- amperage: 35-500A
- 50 VDC (or determined by fuse fitted)
- tinned CDA260 high conductivity brass conductors.
Dimensions: 3.9" x 1.9" x 1.4".
Item#:
MRN778-ANLTP
Manufacturer:
Marinco, Ancor, Guest, BlueSea
Available:
In Stock
107.1300
Your Price:
85.70
EACH
Watertight PVC construction. Features a snap-together design. For use in wet or damp locations. Includes a standard 1/4" X 1-1/4" glass fuse. 12 gauge wire. 20 amps. Display packaged.
Item#:
SDG420554-1
Manufacturer:
Sea-Dog Corp
Available:
In Stock
13.4900
Your Price:
9.58
EACH
Watertight PVC construction. Features a snap-together design. For use in wet or damp locations. Includes a standard 1/4" X 1-1/4" glass fuse. 14 gauge wire. 15 amps. Display packaged.
Item#:
SDG420553-1
Manufacturer:
Sea-Dog Corp
Available:
In Stock
12.5800
Your Price:
8.93
EACH
Snap-on terminal cover insulates all conductive parts, satisfying ABYC/USCG requirements.
Cover breakouts allow wires from sides or bottom.
Terminal screws compress fuse blades within blocks for low resistance connections.
Ignition protected.
Label recess accepts large format label.
Fuses sold separately.
Item#:
BLS5006100
Manufacturer:
Marinco, Ancor, Guest, BlueSea
Available:
In Stock
40.5100
Your Price:
32.41
EACH
In-line AGC/MDL fuse holder
Waterproof. Accepts 12 - 16 AWG wire. Maximum fuse amps: 20. Fuse sold separately.
Item#:
BLS5062
Manufacturer:
Marinco, Ancor, Guest, BlueSea
Available:
In Stock
24.0700
Your Price:
19.26
EACH
In-line AGC/MDL fuse holder
Waterproof. Accepts 12 - 16 AWG wire. Maximum fuse amps: 30. Fuse sold separately.
Item#:
BLS5061
Manufacturer:
Marinco, Ancor, Guest, BlueSea
Available:
In Stock
8.1100
Your Price:
6.49
EACH
In-line AGC/MDL fuse holder
Crimpable in-line AGC/MDL fuse holder.
Accepts 12 - 18 AWG wire.
30A maximum fuse amperage.
Fuse sold separately.
Item#:
BLS5060
Manufacturer:
Marinco, Ancor, Guest, BlueSea
Available:
In Stock
3.3400
Your Price:
2.67
EACH
MAXI in-line fuse holder
MAXI® in-line fuse holder.
Supplied with 5 inch #6 red lead wire and two adhesive lined sealing shrink wrap tubes.
Fire wall surface mounting hole permits two or more holders to be mounted together.
Protective cover with retaining strap.
Fuse sold separately.
Maximum voltage 32V DC, maximum amperage 48A.
Item#:
BLS5068
Manufacturer:
Marinco, Ancor, Guest, BlueSea
Available:
In Stock
34.7900
Your Price:
27.83
EACH
Waterproof fuse holder
For use with ATO or ATC fuses.
Supplied with 12 AWG pigtails.
Maximum fuse amps: 30.
Fuse sold separately.
Item#:
BLS5065
Manufacturer:
Marinco, Ancor, Guest, BlueSea
Available:
In Stock
11.1900
Your Price:
8.96
EACH
For use with ATO or ATC fuses Supplied with 12 AWG pigtails Maximum fuse amps: 30. Fuse sold separately.
Item#:
BLS5064
Manufacturer:
Marinco, Ancor, Guest, BlueSea
Available:
In Stock
5.1500
Your Price:
4.12
EACH
View: