Spin-on filter. Dimensions: 9-19/32" X 4-21/32"

Secondary fuel filter, spin-on.
Fits: Case consolidated Diesel Cummins engines; Komatsu equipment.

2 micron. For secondary (final) filtration. Includes seals.

Replacement element for the Racor 025-RAC-02 filter assembly.
Includes required seals for replacement.
Filter rating 10 micron.
Racor S-2502.

Water/fuel separator cartridge. For Racor FBO 10. 10 micron. Dimensions: 9.93" X 6".

Designed for small diesel and gasoline engines. Simple to install and replace. All plastic housing. Quick-connectors for fuel lines. Includes a bracket for mounting.

Protects your engine from wear particles that can otherwise lead to premature parts failure.

Spin-on design.

Water-absorbing fuel storage tank element.
Absorbs up to 3 ounces of water over life span of filter.
Flow rate: 25 GPM pumped, 10 GPM gravity fed.
15 micron.
1-1/8" mounting stud.
Length: 4-7/8".

Spin-on fuel filter / water separator assembly. For gasoline fuel only. Flow rate: 30 GPH. Uses Aquabloc II filter element, 10 micron. Has a see-through bowl with a drain. Dimensions: 6-1/2" tall, 3-1/4" diameter.

Outside diameter: 3-11/16".
A full-flow lubricant filter unit.
Thread: 3/4" - 16.
#BT216.
Compatible with Perkins 2654403.

Racor fuel filter / water separator turbine
with three-stage filtration.
UL-approved.
Provides maximum protection of diesel engine
components.
Effectively removes contaminants from fuel.
Filters out water, silica, sand, dirt, rust and more.
Equipped with see-through bowl with metal heat
shield.
2 micron element included.
Maximum flow rate: 90 GPH.
Port size: 5/8" MJIC.
Replacement element: 2040N series.
Dimensions: 16.2"H X 5.96"W X 6.76"D.

Engineered to repel water and remove contaminates. A secondary filter for 900 series turbine assemblies. Filter is 10 microns.

A high-efficiency spin-on filter for oil.
Designed to keep contaminants away from critical parts.
Highly durable and reliable.
Replaces a Caterpillar 1R1808 filter.
Thread: 1-1/2".
Length: 12-3/32".
9.8 micron rating.

Features: - 2 micron element - See-through bowl - Primber bulb. Not recommended for gas applications. (This model does not have a probe).

Racor gasoline / water seperator unit.
Features a reusable see-through bowl with a self-venting drain.
Size: 10 microns.
Designed specifically for Mercury / MerCruiser outboard applications.

Racor twin manifold turbine fuel filtration
system with three-stage filtration.
Provides maximum protection of diesel engine
components.
Effectively removes contaminants from fuel.
Filters out water, silica, sand, dirt, rust and more.
Complete with see through bowls.
4-way valve allows for cleaning while operating.
2 micron elements included.
Max. flow rate: 120 GPH.
Port Size: 1/2" ORB.
Replacement element: 2010 series, requires 2.
Dimensions: 11.45"H X 14.5"W X 10.03"D.

Replacement filter element. 30 micron. Fits the Racor 120A, 120R, 122R, and 140R. For diesel or gasoline. M18 X 1.5 center thread port connection.

Replacement filter for SNAPP brackets. Designed for small diesel and gasoline engines. Simple to install and replace. All plastic housing. Quick-connectors for fuel lines.

High-flow fuel water separator assembly. Diesel flow rate of 10 GPM - 18 GPM depending on filter. Features: - Delta pressure gauge - Sight glass to see water collection - Water drain. Does not include a filter element.

Outboard complete filter 2 Micron element, see-thru bowl, primer bulb Max flow rate: 60 GPH/340 Iph Center threads: 1-14 Head port size: 3 Clean pressure drop: 30 PSI/207 kPa Element removal underbowl: 1"/25.4 mm Max Pressure: 7 PSI/48 kPa Operating temp: 1"/25.4 mm Height: 9.38" X 4" X 4".

Inboard/Outboard complete filter 2 Micron element, see-thru bowl, primer bulb Max flow rate: 60 GPH/340 Iph Center threads: 1-14 Head port size: 3 Clean pressure drop: 30 PSI/207 kPa Element removal underbowl: 1"/25.4 mm Max Pressure: 7 PSI/48 kPa Operating temp: 1"/25.4 mm Height: 9.38" X 4" X 4".

Turbine series fuel filter / water separator.
For 1000 series assemblies.
A redesigned filter with a center bail design.
Separates fuel from water with Aquabloc media.
Filter is 2 microns.

Turbine series fuel filter / water separator.
For 1000 series assemblies.
A redesigned filter with a center bail design.
Separates fuel from water with Aquabloc media.
Filter is 10 microns.

Turbine series fuel filter / water separator.
For 1000 series assemblies.
A redesigned filter with a center bail design.
Separates fuel from water with Aquabloc media.
Filter is 30 microns.

Rated for 90 GPH. 2 micron filter. Four port head with 3/8" NPT. Metal bowl (UL Listed). For inboard or outboard applications. Gasoline use only.

For low horsepower outboard engines.

Often time used in small boats and personal watercraft.

Easy to install in-line.

10 micron filter, rated for 24 GPH. 

Can is fluted for improved installation Fits Cummins 5.9L Turbo Diesel Engine Replaces Chrysler 5083285AA O.D.:3-11/16 - Length: 7-1/8 Interior Gasket: G381-A Weight: 1 lb

Schroeder on-board coalescing diesel fuel filter.
Features an automatic drain design.
Low investment cost due the economical design.
Long service life of the element yields low operating costs.
Seamless installation due to the plug and play.
Easy adaption to the on-board power supply.
Unsurpassed water removal for ULSD.
24 volt DC.
2.6 GPM.
Port size: 3/4" BSP.

Replacement filter element.
5 micron.
Appropriate for drinking water.

Engineered to repel water and remove contaminates.
A primary/secondary filter for 500 series turbine assemblies.
Filter is 10 microns.

Water absorbing filter.
10 microns.
Height: 7".
Diameter: 5".

Diesel filter assembly with drain - 15 GPH 2 micron element, see-thru bowl, primer bulb