Aluminum construction.
#12 SAE ORB ports.
#16 1-5/16" cartridge port.
For use with:
- SPESJSA00 cartridge
- SPESJSC00 cartridge
- SPE30534 12 volt coil
- SPE300AA96A 24 volt coil.
C-16-2 #16 Cavity.

Clutch / pump bracket. For use with V20 pumps with a 13944 clutch. Mounts with two bolts. SAE A flange V20 bracket.

Clutch / pump bracket. For use with VTM42 pumps with a 13944 clutch Mounts with two bolts. SAE AA Aluminum VTM.

Elastomeric jaw-type flexible coupling hub.
The industry standard.
Easy to assemble / disassemble.
Contain an inserted rubber spider cushion.
Will continue to work even if cushion fails.
Model L100.
Shaft size: 1-1/8".

Pairs with White Drive DT motors with 2-1/4" straight keyed shafts.
Consists of mounting bracket and flange.
Flange adapted for direct Kinematics Twister replacement.

For wrapping exterior hydraulic valves or exposed fittings. Preserves and protects from corrosion. Impregnated with petroleum and anti-corrosion agents. Resists acids and salts. Width: 2". Length: 33 feet.

Baldwin S451 Resin Ribbon power steering filter element.

For use with #50BS chain. 16 teeth. Shaft diameter: 1".

Steel solenoid body.
Maximum pressure: 5000 PSI.
C-10-2 #10 cavity.
SAE #8 ORB ports.
To be used in conjunction with SPECP5001B000 or SPEDES2C00.

Stitch-bonded, synthetic anti-corrosion fabric tape. Impregnated with petroleum-based compounds. Repels water, salt, acids and alkalis. For long-term protection of metal surfaces. Thickness: 12 mm. Width: 2". Length: 33 foot roll.

ADY098, A to C mount.
620 ADY through-drive plate.
SAE C-PAD.
2 or 4 bolt pattern.
Use with SPE864458 14T drive sleeve.

Hydrocontrol D4 sectional valve. 
A compact, versatile, flexible marinized sectional valve. 
Up to 12 sections. 
Stainless steel spools. 
Max flow rate of 22 GPM. 
Max pressure of 5000 psi. 
Optional power beyond. 
Available in multiple spool types. 
Available in spring-to-center and rotary manual actuation.
#10 SAE ORB.

Hydrocontrol D4 sectional valve. 
A compact, versatile, flexible marinized sectional valve. 
Up to 12 sections. 
Stainless steel spools. 
Max flow rate of 22 GPM. 
Max pressure of 5000 psi. 
Optional power beyond. 
Available in multiple spool types. 
Available in spring-to-center and rotary manual actuation. 
#10 SAE ORB. 

Connects the two ends of a roller chain. Stainless steel. Size: #40.

3.5" X 5". 
Momentary, spring return to center. 
Movement: ON / OFF / ON.

For use with a Hydrocontrol D4 sectional valve.
Four bolts (with nuts and washers) per kit.

In-line type. Shuttle valves accept flow from two different sources and divert the highest pressure to a single outlet port. Commonly used in load sense hydraulic systems.

Six bolts. Six washers.

Connects the two ends of a roller chain.
Stainless steel.
Double.
Size: #50.

Connects the two ends of a roller chain.
Regular steel.
Long link.
Size: #40.

Joins two pieces of chain by one pitch increment.
Regular steel.
Size: #40.
Meets ASME/ANSI B29.1 standards.