Includes seals and O-rings. Imported.

4.8 CID. 
Load sense / pressure compensated. 
Right hand rotation. 
7/8" - 13T shaft. 
Dual lip seal. 
2 bolt "B" flange mount. 
Side port. 
421AK01466. 

3.8 CID.
Loadsense / pressure compensated.
Righthand rotation.
Side port.
Dual lip front seal.
7/8" - 13 tooth splined shaft.
2 bolt "B" flange.
Solo.

5.98 CID. Load sense / pressure compensated. Right hand rotation. Dual lip front seal. Through drive. 1-1/4 - 14T 4-bolt "C" mount. "A" mount cover. Uses rear pad adapter and sleeve for through-drive operation

Load sense.
Counterclockwise rotation.
Not torque limiting.
Displacement: 6.4 cubic inches.
Front drive flange: SAE C 4-bolt.
Rear drive flange: SAE C 4-bolt.

Load sense.
Clockwise rotation.
Not torque limiting.
Displacement: 4.6 cubic inches.
Front drive flange: SAE C 4-bolt.
Rear drive flange: SAE A 2-bolt.

Load sense.
Counterclockwise rotation.
Not torque limiting.
Displacement: 4.6 cubic inches.
Front drive flange: SAE C 4-bolt.
Rear drive flange: SAE B 2-bolt.

Engine, pump, tank, filter: a self-contained unit.
Fully assembled and mounted with stainless steel fasteners.
Marine-grade aluminum base with aluminum handle.
8 GPM 4-stroke, 9 horsepower Honda gasoline engine.
Suitable for powering 12" hauler head assemblies.

NOTE: Engine on this power pack is shipped WITHOUT oil.  Fill engine with oil to proper lever before starting.

NOTE: Due to the size of this product, shipping via UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

4GPM controlled flow.
1000 PSI relief.
5/8" 9 tooth shaft.
SAE-A 2-bolt mount.
Left hand rotation.

Shaft drilled and tapped.
Single vane pump only.
2-bolt A flange mount.
Right hand rotation.
13 GPM at 1200 RPM.
Inlet: 1-1/4" NPT.
Outlet: 3/4" NPT.

Engine, pump, tank, filter: a self-contained unit.
Fully assembled and mounted with stainless steel fasteners.
Marine-grade aluminum base with aluminum handle.
11 GPM 4-stroke, 13 horsepower Honda gasoline engine.
Suitable for powering 12" hauler head assemblies.
Electric-start enabled.

NOTE: Engine on this power pack is shipped WITHOUT oil.
Fill engine with oil to proper lever before starting.

NOTE: Due to the size of this product, shipping via UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

NBR seals.
Loadsense.
Connection: 3/4" - 16 UNF.
Maximum input pressure: 175 bar (2500 PSI).
Maximum continuous backpressure: 25 bar (360 PSI).
VFU: 125.
Flow rating: 12.5 liters / minute.
Displacement: 7.3 cubic inches.

Rated for 4 GPM. Right hand.

HAWE V60N variable displacement axial piston pump.
Adjustable geometric output volume from maximum to zero.
Peak pressure: 6500 PSI.
Slim design, optimized power-to-weight ratio.
Thru-shaft compatibility.
High self-suction speed.
8.0 CID.
SAE-C flange.
1-1/4-14t spline input shaft.
Thru drive SAE-C 4 bolt flange.
Right hand rotation.
Dual lip seal.

V20 hydraulic pump assembly.
Complete with aluminum bracket and 12 volt clutch.
2.59 CID, 13 GPM at 1500 RPM.
Right hand rotation.
Inlet: 1-1/4" NPT.
Outlet: 3/4" NPT.