For general purpose masking.
Protects surfaces from drips, roller mist, and overspray
Works well with paper taper masking machine.
Ideal for use with water or oil based coatings.
Appropriate for lacquers and acrylics.
Color: Green.
Dimensions: 12" X 1000'.

For general purpose masking.
Protects surfaces from drips, roller mist, and overspray.
Works well with paper taper masking machine.
Ideal for use with water or oil based coatings.
Appropriate for lacquers and acrylics.
Color: Green.
Dimensions: 9" X 1000'.

For general purpose masking.
Protects surfaces from drips, roller mist, and overspray.
Works well with paper taper masking machine.
Ideal for use with water or oil based coatings.
Appropriate for lacquers and acrylics.
Color: Green.
Dimensions: 36" X 1000'.

High gloss, single-component paint. Especially formulated for use at the waterline. Provides outstanding protection against the weather. Fresh and salt water resistant. For use with fiberglass, steel, wood, or aluminum. Color: Bright Blue. Size: 250 ml.

Will not rust or leave rust spots. Medium grade. Three pads per package.

Amercoat 229T is used as an above-water finish. Durable, tough epoxy, a colorful and glossy top coat. Resists soil and grime pickup; cleans easily. Use wherever corrosion resistance is needed. Color: Deep Blue. Size: 1 gal.

"Butcher Block" wire brush. Six rows of 19 wire strands. Weight: .45 lbs.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "International Orange." Size: 5 gal.

Bronze Wool Pads - Fine 3 pads per pack.

Bronze Wool Pads - Medium 3 pads per pack.

Coarse. 3 pads per pack.

Will not rust or leave rust spots. Fine grade. Three pads per package.

High-gloss multi-purpose siloxane coating. Two components combine into a unique epoxy. Provides great weather and chemical resistance. Resists moisture, humidity, corrosion, and acid. High solids, low VOC. Color: Safety Yellow. breakthrough weather resistance and corrosion control.

Single-component alkyd gloss topcoat. Designed to protect and enhance marine exteriors. Great weathering properties, easy to apply, drys quickly. Not meant to resist severe chemical or immersion conditions. Color: Mist Gray. Size: 1 gal.

1-part general purpose polyurethane. Strong and flexible. For fiberglass, gel coat, and wood. Medium strength, allows for disassembly. Color: White. Size: 3 oz. Weight: .2 lb.

An all-weather SEBS asphalt. A very versatile roofing and waterproofing product. Designed for maximum elasticity and UV resistance. Asbestos-free and has a UL Class A fire rating. Size: 5 gallons. Weight: 42.1 lbs.

Red Line 5" 5-hole vacuum-grip discs with lubricant. Recommended for sanding and finishing of fillers and wood. Aluminum oxide grit, 220 A. A weight paper. 50 discs per box.

Aggressive, thin scuff pads. 
The reinforced fibers are strong and durable, with an open and flexible structure.
Produces a dense scratch pattern for rapid results.
Suitable for both wet and dry sanding.
Dimensions: 4-1/2" X 9".
Silicon carbide grit: Ultra Fine, 1500.
Color: Gray.

Aggressive, thin scuff pads. 
The reinforced fibers are strong and durable, with an open and flexible structure.
Produces a dense scratch pattern for rapid results.
Suitable for both wet and dry sanding.
Dimensions: 4-1/2" X 9".
Aluminum oxide grit: Very Fine, 360.
Color: Red.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "Norquest Blue." Size: 1 gal.

A copper-free antifouling bottom paint. Uses the controlled release of biocide to fight fouling. Approved for use on fiberglass, wood, and all metal. For use in fresh, salt, or brackish water. Color: Black. Size: 1 gallon. Weight: 16 lbs

White Line 6" 8-hole vacuum grip discs. Recommended for sanding and finishing of fillers and wood. Lubricated with anti-clogging solution. Aluminum oxide grit, P 220 C. C weight paper. 50 discs per box. Weight: .01 lbs. each.

Single-component alkyd gloss topcoat.
Designed to protect and enhance marine exteriors.
Great weathering properties, easy to apply, drys quickly.
Not meant to resist severe chemical or immersion conditions.

Color: Green.
Size: 1 gal.

A copper-free antifouling bottom paint. Uses the controlled release of biocide to fight fouling. Approved for use on fiberglass, wood, and all metal. For use in fresh, salt, or brackish water. Color: Red. Size: 1 gallon. Weight: 16 lbs

Rust-Oleum protective enamel spray paint. Provides long-lasting rust protection and beauty. Applies well to metal, wood, concrete, or masonry. A wide comfort spray tip makes application a breeze. Color: Semi-gloss Black. Size: 12 oz. Weight: 1.11 lbs.

Single-component alkyd gloss topcoat. Designed to protect and enhance marine exteriors. Great weathering properties, easy to apply, drys quickly. Not meant to resist severe chemical or immersion conditions. Color: 2973 Light Gray. Size: 1 gal.

A copper-free antifouling bottom paint. Uses the controlled release of biocide to fight fouling. Approved for use on fiberglass, wood, and all metal. For use in fresh, salt, or brackish water. Color: Blue. Size: 1 gallon. Weight: 16 lbs

ePaint ZO, the original copper-free anti-fouling paint.
Creates a hard and lightweight fluoro-polymer surface.
The best alternative to copper-based bottom paint.
Uses Zinc Omadine biocide to prevent algae/slime growth, and photoactive technology to deter shelled organisms.
Recommended for all boats in both salt and fresh water.
ePaint ZO is bright, colorful, and easy to apply.
Size: 1 gal.
Color: Green.

Non-sag elastoplastic M34 polycarbonate sealant. Instant adhesion/seal on contact, can stretch 350%. Temperature range: -70°F to 220°F. Stays flexible, not brittle. For transoms, portholes, seams, deck and more. Color: White. Weight: .8 lb.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "Platypus Blue." Size: 5 gal.

The backing is a dense network of polyamide fabric threads. Designed for speed, efficiency and great dust extraction. Versatile to suit practically any application. Grit: 400. Size: 3". 50 discs per box.

Amercoat 229T is used as an above-water finish.
Durable, tough epoxy, a colorful and glossy top coat.
Resists soil and grime pickup; cleans easily.
Use wherever corrosion resistance is needed.
Color: Ocean Gray.
Size: 1 gal.

General-purpose sanding sponges.

Amercoat 229T is used as an above-water finish. Durable, tough epoxy, a colorful and glossy top coat. Resists soil and grime pickup; cleans easily. Use wherever corrosion resistance is needed. Color: Aqua Blue. Size: 5 gal.