Chiseled tip. Soft China white bristle. White plastic Kaiser handle. Brass ferrule. Great for varnish, stains, enamels, and solvents. Size: 1-1/2"

Amerlock 2 is a fast-drying surface tolerant epoxy. Adheres to tight rust and prepared damp surfaces. Catalyst helps cure and set epoxy resin. Size: 2-1/2 gal.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "Offshore Yellow." Size: 1 gal.

Water-based antifouling marine paint for fiberglass or wood. Ablative action repels barnacles and other growth. Fast-drying, rolls on easily. Exceeds V.O.C. standards, US EPA approved. Color: Red. Size: 1 gal.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "Off-White." Size: 1 gal.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "RD-1 Bright Red." Size: 5 gal.

General-purpose, low-VOC thermosetting adhesive.
Used to bond virtually all porous and non-porous substrates.
Provides a tough, chip-resistant, flexible bond.
Size: 1 gallon.

ePaint SN-1 copper-free antifouling bottom paint.
For heavy-duty use in harsh marine environments.
Formerly only available for the U.S. government.
Features ePaint's patented photo-active technology and Sea Nine 211N, a broad-spectrum biocide.
Compatible with other antifouling paints, easy to apply.
Size: 5 gal.
Color: White.

Red Line 6" solid grip discs. Recommended for sanding and finishing of fillers and wood. Aluminum oxide grit, P 1200 A. Lubricated with anti-clogging solution. A weight paper. 50 discs per box.

Diameter: 5".
10 mm thick.
32 holes, 1 big center hole.
Helps Abranet discs stick better and protects backup pads from premature wear.
Designed for use with the Mirka Ceros 5" compact electric random orbital sander.

Fast-drying, metallic copper aerosol sealant. Helps dissipate heat and fill surface irregularities. Resists all types of petrochemicals. Temperature range -50°F to 500°F. Size: 12 oz.

RhynoGrip Red Line high-efficiency 3" sanding discs.
Sanding and finishing of fillers, primers, and wood.
Lubricated for high performance.
Aluminum oxide grit, P 400 A.
Diameter: 3".
50 discs per box.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "Safety Orange." Size: 1 gal.

Amercoat 229T is used as an above-water finish. Durable, tough epoxy, a colorful and glossy top coat. Resists soil and grime pickup; cleans easily. Use wherever corrosion resistance is needed. Color: National Blue. Size: 1 gal.

Tear, moisture, and solvent resistant. Perfect for wet sanding. Provides excellent cornering. Try it for die cutting or custom jobs. Clean removal means crisp paint lines. Width: 1-1/2". Length: 180 feet.

Traditional alkyd-based yacht enamel.
Bright high gloss finish
Excellent flow and leveling properties
Superior hide, gloss and color retention.

Traditional alkyd-based yacht enamel
Bright high gloss finish
Excellent flow and leveling properties
Superior hide, gloss and color retention

Amercoat 229T is used as an above-water finish. Durable, tough epoxy, a colorful and glossy top coat. Resists soil and grime pickup; cleans easily. Use wherever corrosion resistance is needed. Color: White. Size: 5 gal.

Multi-hole, grip-faced pad. Medium density. For use with Abranet abrasives. Diameter: 8".

Polyester film backing material. Designed to be a flexible, smooth abrasive. Resistant to clogging. Great for hard tooling gelcoats and scratch-resistant clear Manufactured using environmental-friendly coating system. Suitable for wet or dry sanding. Grit: 1000. Size: 5". 50 discs per box.

Polyester film backing material. Designed to be a flexible, smooth abrasive. Resistant to clogging. Great for hard tooling gelcoats and scratch-resistant clear Manufactured using environmental-friendly coating system. Suitable for wet or dry sanding. Grit: 1500. Size: 5". 50 discs per box.

Polyester film backing material. Designed to be a flexible, smooth abrasive. Resistant to clogging. Great for hard tooling gelcoats and scratch-resistant clear Manufactured using environmental-friendly coating system. Suitable for wet or dry sanding. Grit: 1200. Size: 5". 50 discs per box.

Polyester film backing material.
Designed to be a flexible, smooth abrasive.
Resistant to clogging.
Great for hard tooling gelcoats and scratch-resistant clear.
Manufactured using environmental-friendly coating system.
Suitable for wet or dry sanding.
Grit: 800.
Size: 5".
50 discs per box.

Single component acrylic polysiloxane. Glossy topcoat with high solids and low VOC. Provides better weathering than aliphatic polyurethane. Easy application with brush, roller, or spray. Color: "Ocean Fish Blue." Size: 1 gal. Weight: 12.6 lbs.

'Wood Flour' is ground and filtered natural bark. Mixes with epoxy to form a wood-colored, sandable surface. Simply add Wood Flour until desired consistancy is reached. Used when a hard solid for filling and filleting is required Size: 1/2 gal. Weight: 1 lb.

Single-component alkyd gloss topcoat. Designed to protect and enhance marine exteriors. Great weathering properties, easy to apply, drys quickly. Not meant to resist severe chemical or immersion conditions. Color: Buff Brown. Size: 1 gal.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "Safety Blue." Size: 1 gal.

Milled fibers (1/32" milled fiberglass). Used when epoxy must fill a void and provide extremely high strength and resistance to cracking. Ideal for structural filleting and hardware bonding. Simply add to mixed epoxy. Size: 1/2 gallon. Weight: .2 lbs.

Phenolic micro balloons, organic phenolic hollow spheres Low density, lightweight epoxy additive. Used when sandable, paint-ready surfaces are required. Ideal for fairing. Size: 1/2 gallon. Weight: .6 lbs.

CAB-O-SIL fumed colloidal silica. Adds strength to epoxies. Creates an extremely hard, high-density solid finish. Ideal for structural bonding, filling, and filleting. Simply add into mixed epoxy. Absolutely clear finish when dry; no white residue. Size: 1/2 gallon. Weight: .25 lbs.

Amerlock 2 fast-drying surface-tolerant epoxy kit. Adheres to tight rust and prepared damp surfaces. Provides great corrosion protection. Typically used on steel decks, hulls, and pipes. Color: GR-2 Medium Gray. Size: 2 gal.

Single-component alkyd gloss topcoat. Designed to protect and enhance marine exteriors. Great weathering properties, easy to apply, drys quickly. Not meant to resist severe chemical or immersion conditions. Color: Deep Gray. Size: 1 gal.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "1979 Safety Purple". Size: 1 gal.

Soft badger-style pure China bristle. Hand formed chisel tip. Unlacquered hardwood round peg handle. Stainless steel ferrule. Size: 1-1/2" Weight: .1 lb.