High-temp, heavy-duty use. Temps: -75°F to 650°F intermittent. Manufacturer's number: 26B. Color: Red. Size: 11 oz.

Multifunctional aliphatic polyurethane marine coating. 
2 parts, ideal for use on prepared steel surfaces. 
Low VOC, high gloss, self-priming, tough and flexible. 
Gives good chemical and stain resistance. 
Used on marine superstructures, boat decks, and more. 
Color: "Ageliqus Green." 
Size: 1 gal. 

Amercoat 229T is used as an above-water finish. Durable, tough epoxy, a colorful and glossy top coat. Resists soil and grime pickup; cleans easily. Use wherever corrosion resistance is needed. Color: Clay Tan. Size: 1 gal.

Self-priming, quick-dry formula. Designed to withstand up to 1200° F. 12 oz. aerosol can. Color: High heat white.

Total engine coverage using quick drying engine paint. Heat and solvent resistant acrylic lacquer. Gives the extended staying power boat engines need. Color matched to engines original color. For outboard/inboard engines, stern drive, and lower units. 12 oz. aerosol can. Color: Volvo metallic silver.

Total engine coverage using quick drying engine paint. Heat and solvent resistant acrylic lacquer. Gives the extended staying power boat engines need. Color matched to engines original color. For outboard/inboard engines, stern drive, and lower units. 12 oz. aerosol can. Color: Shadow black.

A quick, strong two part epoxy.
Permanently repairs scratches, gouges and holes. 
OK for us with wood, steel, fiberglass, glass, ceramics, plastics, concrete and aluminum. 
Bonds to wet and dry surfaces. 
Ready to use in less than one minute. 
Size: 4 oz.

Single-component yacht coating. Based on oil-modified alkyd resins. Ultra high gloss, superior flow and durability. Finish coat for wood, steel, aluminum, and fiberglass. For interiors and exteriors above the waterline. Color: Jade Green. Size: 750 ml.

Single-component yacht coating. Based on oil-modified alkyd resins. Ultra high gloss, superior flow and durability. Finish coat for wood, steel, aluminum, and fiberglass. For interiors and exteriors above the waterline. Color: Blue Gray. Size: 750 ml.

Onyx best all-around quality finish brush. Great for enamels, varnishes and urethanes. Offers fine all-around performance. Brush has 100% white China chisel-edged bristles. and a varnished wood handle. Size: 2-1/2" bristles. Weight: .11 lb.

Rust-Oleum protective enamel spray paint. Provides long-lasting rust protection and beauty. Applies well to metal, wood, concrete, or masonry. A wide comfort spray tip makes application a breeze. Color: Rusty Metal. Size: 12 oz. Weight: 1.11 lbs.

Converts rust into a barrier layer of magnetite. A bonding agent for epoxy, acrylic, and oil-based finishes. Gives exceptional bonding with moisture cured polyurethanes. May be used as a rust converter, or paint / etch primer. Eliminates the need to mechanically blast to white metal. Not for use with zinc chromates or zinc phosphates. Size: 1 gal. Coverage: Approximately 200 square feet, at 10 mil.

Converts rust into a barrier layer of magnetite. A bonding agent for epoxy, acrylic, and oil-based finishes. Gives exceptional bonding with moisture cured polyurethanes. May be used as a rust converter, or paint / etch primer. Eliminates the need to mechanically blast to white metal. Not for use with zinc chromates or zinc phosphates. Size: 5 gal. Coverage: Approximately 1000 square feet, at 10 mil.

This tape is specifically designed to provide protective surface masking during dry paint stripping / removal, shot peening, or other processes. Blast Impact tape sticks instantly to clean / dry surfaces, requiring little to no hot glue on the edges to prevent media intrusion.

It's flexible and resists cracking or lifting, conforming to irregular or curved surfaces. White crepe release-coated paper liner makes it easy to tear by hand, or cut with a knife for a precision fit.

2" X 10 yards.

Ablative action repels barnacles and other growth. Outstanding value and great results. Used extensively worldwide in commercial markets. Contains 24.7% cuprous oxide. U.S. EPA approved. Color: Blue.

Ablative action repels barnacles and other growth. Outstanding value and great results. Used extensively worldwide in commercial markets. Contains 24.7% cuprous oxide. U.S. EPA approved. Color: Red.

Single-component yacht coating. Based on oil-modified alkyd resins. Ultra high gloss, superior flow and durability. Finish coat for wood, steel, aluminum, and fiberglass. For interiors and exteriors above the waterline. Color: Mahogany. Size: 750 ml.

Indasa solid vacuum grip backup pads.
For use with Indasa's Velcro grip system.
Pads securely grip grinding or sanding discs in place.
Lightweight, balanced, and shock resistant.
Maximum operating speed: 10,000 RPM.
Diameter: 8".

Multi-purpose edge retentive epoxy coating.
Designed for direct-metal application.
Exceptional corrosion protection and edge coverage.
Surface tolerant, excellent adhesion to tight rust.
Fast-drying, low-temperature cure.
Color: Light Gray.
Size: 5 gal.

Catalyst for two-part Amerlock epoxy sealer. Used for marginally prepared steel and old coatings. Excellent resistance to corrosive environments. Size: 1 gal. Weight: 8.5 lbs.

Sikaflex 291 marine polyurethane sealant. A professional-grade boat building product. Bonds very well to hull and vessel structure materials. Suitable for many purposes above and below the waterline. Color: Black. Size: 10.5 oz. Weight: .93 lb.

Sikaflex 291 marine polyurethane sealant. A professional-grade boat building product. Bonds very well to hull and vessel structure materials. Suitable for many purposes above and below the waterline. Color: White. Size: 10.5 oz. Weight: .93 lb.

Polyester film backing material. Designed to be a flexible, smooth abrasive. Resistant to clogging. Great for hard tooling gelcoats and scratch-resistant clear Manufactured using environmental-friendly coating system. Suitable for wet or dry sanding. Grit: 1000. Size: 6". 50 discs per box.

For surfaces above the waterline Usable on bare metal, steel, iron, fiberglass, and wood. Quick-dry formula covers and fights rust. Improves bonding of color coat. 12 oz. aerosol can. Color: Platinum grey.

Durable translucent satin protective wood finish Developed using a special alkyd resin and selected UV absorbing pigments Microporous, allows the wood to breathe, withstands physical wear Water resistant, water repellant, gloss finish. Weight: 2.4 lbs

Protective translucent finish for wood.
Durable and protective, designed to withstand physical wear.
Microporous and allows the wood to breathe.
Water resistant and water repellent.
Features special alkyd resin and UV-absorbing pigment.
Color: Natural Teak.
Size: 1 qt.

High-end pressure sensitive masking tape.
Ideal for hull, exterior, deck and cabin use.
Removes cleanly for up to 14 days, even in direct sunlight.
Great for outdoor masking of wood, glass, and metal.
Size: 1".
Color: Blue.

High-end pressure sensitive masking tape.
Ideal for hull, exterior, deck and cabin use.
Removes cleanly for up to 14 days, even in direct sunlight.
Great for outdoor masking of wood, glass, and metal.
Size: 2".
Color: Blue.

High-end pressure sensitive masking tape.
Ideal for hull, exterior, deck and cabin use.
Removes cleanly for up to 14 days, even in direct sunlight.
Great for outdoor masking of wood, glass, and metal.
Size: 1-1/2" X 60 yd.
Color: Blue.

Amercoat 888 anti-slip grit additive. A blended aluminum oxide aggregate. Used with mixed units of Amerlock 400GFK or Amerlock 400. Mixing Ratio: 1 pint per two-gallon unit of epoxy. Color: Aluminum Gray. Size: 1 gal.

Amercoat 888 anti-slip grit additive. A blended aluminum oxide aggregate. Used with mixed units of Amerlock 400GFK or Amerlock 400. Mixing Ratio: 1 pint per two-gallon unit of epoxy. Color: Aluminum Gray. Size: 1 qt.

Methyl ethyl ketone peroxide and cumyl hydroperoxide. A liquid polymerization initiator for curing resin. For use with unsaturated polyester and vinyl ester resins. Size: 1 pint.

Red Line 6" self-adhering solid grip discs. Recommended for sanding and finishing of fillers and wood. Aluminum oxide grit, P 120 C. Lubricated with anti-clogging solution. C weight paper. 100 discs per box.

Highly-rated, one-part polyurethane topside paint.
Improved by the addition of silicone for a brilliant shine.
Easy to apply and produces a lasting gelcoat-like finish.
Contains UV filters, which enhance the glossy look and feel.
 
Color: "Black".
 
Size: Quart.

Red Line 6" self-adhering solid grip discs. Recommended for sanding and finishing of fillers and wood. Aluminum oxide grit, P 180 C. Lubricated with anti-clogging solution. C weight paper. 100 discs per box.