Provides protection from damage caused by water absorption. Contains a UV absorber to protect from sunlight damage. Long-lasting, naturally penetrating. Color: Walnut. Size: 1 quart.

Provides protection from damage caused by water absorption. Contains a UV absorber to protect from sunlight damage. Long-lasting, naturally penetrating. Color: Walnut. Size: 1 gallon.

A tough, abrasion resisting anti-corrosive coating. For protecting steel structures and equipment. Used in the most severe conditions. Fundamentally different from other types of coatings. Affords excellent protection against many acids and alkalis. Withstands severe temperature changes and extreme exposure. Not for use where in contact with drinking water. Withstands temperatures up to 350° F. No primer needed. Size: 1 gallon. Weight: 12 lbs.

A tough, abrasion resisting anti-corrosive coating. For protecting steel structures and equipment. Used in the most severe conditions. Fundamentally different from other types of coatings. Affords excellent protection against many acids and alkalis. Withstands severe temperature changes and extreme exposure. Not for use where in contact with drinking water. Withstands temperatures up to 400° F. No primer needed. Size: 1 gallon. Weight: 10 lbs.

Single-component yacht coating. Based on oil-modified alkyd resins. Ultra high gloss, superior flow and durability. Finish coat for wood, steel, aluminum, and fiberglass. For interiors and exteriors above the waterline. Color: Yellow. Size: 750 ml.

Single-component yacht coating. Based on oil-modified alkyd resins. Ultra high gloss, superior flow and durability. Finish coat for wood, steel, aluminum, and fiberglass. For interiors and exteriors above the waterline. Color: Atlantic Green. Size: 750 ml.

Amercoat 302 reinforced inorganic zinc primer. Zinc-rich primer used for protecting steel. Used on tanks, equipment, piping, ships, barges, Easily applied, low VOC, fast-dry. Provides outstanding corrosion resistance. Pre-mixed with zinc dust Mixing ratio, by volume: 1 part cure to 9 parts resin.

Rhynowet Red Line wet/dry sandpaper sheets. Recommended for sanding primers and scuffing top coats. Water repellent latex backing prevents hand slipping. Long life for wet or dry applications. Aluminum oxide grit, P 1200 A. Size: 9" X 11". 50 full sheets per box.

Semi-gloss multi-purpose epoxy coating. Provides salt and freshwater corrosion protection. Excellent adhesion to tight rust, self priming. Used on ballast tanks, bilges, and drainage pipes. Color: Haze Gray. Size: 1 gal.

Amercoat 214 low VOC antifouling paint. Recommended where regulations ban organotin. Long-lasting paint for fouling waters, up to 24 months. High performance for heavy-duty service. Color: Red. Size: 5 gal.

Catalyst and resin for two-part Amerlock epoxy sealer. Used for marginally prepared steel and old coatings. Excellent resistance to corrosive environments. Size: 2 gal. total.

Converter for Amercoat resin.
Designed for direct-metal application.
Exceptional corrosion protection and edge coverage.
Surface tolerant, excellent adhesion to tight rust.
Cure for use with Amercoat 240 resin.
Size: 1 qt.

Single-component yacht coating. Based on oil-modified alkyd resins. Ultra high gloss, superior flow and durability. Finish coat for wood, steel, aluminum, and fiberglass. For interiors and exteriors above the waterline. Color: Aluminum. Size: 750 ml.

A multi-purpose two-part epoxy primer.
Suitable for use under all Interlux topside finishes
It can be used to resurface cracked and crazed gelcoat, and over clear epoxies to eliminate the effects of amine blush.
Size: 1 qt.

Frame for mini roller. Fits 4" roller covers. Suitable for 1/2" nap or mini foam rollers. Weight: .5 lb.

General-purpose grinding/cutting disc. 
Aluminum oxide abrasive. 
For cutting ferrous metals. 
Depressed center wheel. 
Diameter 7". 
Thickness: 1/8".

Single-component varnish alternative. Based on phenolic-modified alkyd resins and tung oil. Dries to a clear amber matte finish. Specially formulated for use with oily woods, like teak. For long-lasting protection of all marine woods. Appropriate for interior and exterior woods. Hand-rubbed appearance. Size: 1 liter.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "RT-1503 Gray." Size: 1 gal.

Total engine coverage using quick drying engine paint. Heat and solvent resistant acrylic lacquer. Gives the extended staying power boat engines need. Color matched to engines original color. For outboard/inboard engines, stern drive, and lower units. 12 oz. aerosol can. Color: Mercury Phantom black.

Medium density, with multiple holes. For use with Abranet abrasives. Diameter: 6".

An "All-in-One" primer.
Single-part multipurpose primer for above the waterline.
Combines the features of separate substrate primers in one.
Adheres well to wood, fiberglass, metals: bare or painted surfaces.
Excellent covering capability, high build, good grain filling.
Provides corrosion protection on steel.
Color: Gray.
Size: 3/4 liter.

Kel-Kote single-component non-skid coating.
A special non-slip formula for decks and other surfaces.
Resistant to cold, heat, salt water, corrosion, abrasion and impact.
Approved for use on wood, steel, aluminum, fiberglass or masonry.
Color: Light gray.
Size: 1 gallon.

Telescoping extension pole. For extending your reach. Aluminum and yellow fiberglass construction. Adjustable via "large twist" collar. Size: 4' to 8'. Weight: 1.92 lbs.

Red Line 6" 8-hole self-adhering solid grip discs. Recommended for sanding and finishing of fillers and wood. Aluminum oxide grit, P 600 A. A weight paper. 50 discs per box. Weight: .01 lbs. each.

A UV-resistant wood finish. Based on modified alkyd and urethane resins. For long-term protection of interior and exterior woods. Bonds well to teak and other oily woods. Clear, matte finish. Size: 3/4 liter.

For general purpose grinding, cleaning, deburring. Attaches to hubs with nylon locking threads. For 3" type 3 abrasive discs.

Rhynostick White Line self-adhesive 6" solid discs. Recommended for general purpose sanding. Lubricated with anti-clogging solution. Aluminum oxide grit, P 400 C. C weight paper. 100 discs per box.

14" reach.
1/4" diameter plated steel rod.
Threaded grip with metal ring.
Used with 6-1/2" cover.

Single-component yacht coating. Based on oil-modified alkyd resins. Ultra high gloss, superior flow and durability. Finish coat for wood, steel, aluminum, and fiberglass. For interiors and exteriors above the waterline. Color: White. Size: 750 ml.

A handmade chisel-edged tip. Great for enamels, varnishes and urethanes. Offers ultra-fine finishing results. Brush has natural badger-style China bristles and a pencil-style clear wood handle. Size: 2-1/2" bristles. Weight: .09 lb.

Highly-rated, one-part polyurethane topside paint.
Improved by the addition of silicone for a brilliant shine.
Easy to apply and produces a lasting gelcoat-like finish.
Contains UV filters, which enhance the glossy look and feel.
 
Color: "Seattle Gray".
 
Size: 1 quart.

A-788 Splash Zone compound Pettit's emergency repair solution.
A two-part putty epoxy.
Splash Zone fills, seals, and patches.
May be mixed and applied underwater, adheres almost anywhere.
Will cure underwater and in the air.
Not for use with potable water systems.
Size: Two one-pint containers.

Pettit's emergency repair solution.
A two-part putty epoxy.
Splash Zone fills, seals, and patches.
May be mixed and applied underwater, adheres almost anywhere.
Will cure underwater and in the air.
Not for use with potable water systems.
Size: Two one-quart containers.