Optimal foam thickness.
Semi-open grain coating for less clogging.
Will mitigate damage on profile sanding.
For primer sanding or clear coats.

Aluminum oxide grit: 240C.
Size: 5".

50 discs per box.

Amerlock 2 fast-drying surface tolerant epoxy. Adheres to tight rust and prepared damp surfaces. Provides great corrosion protection. Typically used on steel decks, hulls, and pipes. Color: Aluminum primer. Size: 2 gal.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "Signal Red." Size: 1 gal.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "Deep Blue." Size: 1 gal.

Indasa RhynaStick RedLine 2-3/4" sanding paper.
Recommended for sanding fillers, primers, wood and metal.
Aluminum oxide grit, P 180 C.
2-3/4" x 25 meter roll.

Rust-Oleum protective enamel spray paint. Provides long-lasting rust protection and beauty. Applies well to metal, wood, concrete, or masonry. A wide comfort spray tip makes application a breeze. Color: Semi-gloss White. Size: 12 oz. Weight: 1.11 lbs.

Optimal foam thickness. Six holes and semi-open grain coating for less clogging. Will mitigate damage on profile sanding. For primer sanding or clear coats. Grit: 60D. Size: 6". 50 discs per box.

A high-performance patching compound.
Formulated to stop running water.
For cracks, holes and imperfections in concrete surfaces.
It creates a watertight seal in about 3-5 minutes.
Works both above and below ground level.
Interior/exterior use.
Color: Gray.
Size: 10 lbs.

Hand-formed chiselled tip. Unlacquered hardwood Palmgrip handle. Stainless steel ferrule. For use with enamels and varnishes. Size: 1-1/2" Weight: .1 lb.

Lightweight, precise orbital sander. Designed to be quiet and easy to use. Features: - Vacuum dust extraction - True 12,000 RPM performance - Precision construction for strength and durability. Includes a backup pad, wrench and oil. Orbit: 5 mm. Dimensions: 5".

A high-performance patching compound.
Stops and seals leaks in concrete and masonry.
Creates a watertight seal in 3 - 5 minutes, "even while water is flowing".
Also works great as a fast-setting anchoring cement.
5 pound package.

Hand-formed chisel tip. Plastic foam Kaiser handle. Nickel ferrule. Ideal for production yard urethanes. Size: 2-1/2"

Indasa RhynaStick RedLine 2-3/4" sanding paper.
Recommended for sanding fillers, primers, wood and metal.
Aluminum oxide grit, P 100 C.
2-3/4" x 25 meter roll.

Corrosion-resistant primer for structural steel. Intended to be covered with alkyd topcoating. Single component, resists corrosion, sprays well. Contains no lead or chrome pigments. Suitable for exterior and interior steel surfaces. Color: Red. Size: 1 gal.

Optimal foam thickness. Six holes and semi-open grain coating for less clogging. Will mitigate damage on profile sanding. For primer sanding or clear coats. Grit: 80D. Size: 6". 50 discs per box.

Indasa RhynaStick RedLine 2-3/4" sanding paper.
Recommended for sanding fillers, primers, wood and metal.
Aluminum oxide grit, P 120 C.
2-3/4" x 25 meter roll.

Optimal foam thickness.

Semi-open grain coating for less clogging.
Will mitigate damage on profile sanding.
For primer sanding or clear coats.
 
Aluminum oxide grit: 320C.

Size: 5".

50 discs per box.

High-gloss multi-purpose siloxane coating.
Two components combine into a unique epoxy.
Provides great weather and chemical resistance.
Resists moisture, humidity, corrosion, and acid.
High solids, low VOC.
Color: "Clay Tan".
Size: 1 gal.

Rust-Oleum protective enamel spray paint. Provides long-lasting rust protection and beauty. Applies well to metal, wood, concrete, or masonry. A wide comfort spray tip makes application a breeze. Color: Navy. Size: 12 oz. Weight: 1.11 lbs.

Semi-gloss multi-purpose epoxy coating. Provides salt and freshwater corrosion protection. Excellent adhesion to tight rust, self priming. Used on ballast tanks, bilges, and drainage pipes. Color: Light Gray. Size: 1 gal.

Optimal foam thickness. Six holes and semi-open grain coating for less clogging. Will mitigate damage on profile sanding. For primer sanding or clear coats. Grit: 100D. Size: 6". 50 discs per box.

Textured foam rollers.
Designed specifically to apply Tuff Coat nonskid coating.
Will evenly distribute the material, which can't be achieved with a standard roller.
Length: 4".

Two per package.

Single component acrylic polysiloxane. Glossy topcoat with high solids and low VOC. Provides better weathering than aliphatic polyurethane. Easy application with brush, roller, or spray. Color: "Sandtone." Size: 1 gal.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "Aqua Blue." Size: 5 gal.

Highly-rated, one-part polyurethane topside paint.
Improved by the addition of silicone for a brilliant shine.
Easy to apply and produces a lasting gelcoat-like finish.
Contains UV filters, which enhance the glossy look and feel.
 
Color: "Hatteras Off White".
 
Size: 1 gallon.

High-gloss multi-purpose siloxane coating.
Two components combine into a unique epoxy.
Provides great weather and chemical resistance.
Resists moisture, humidity, corrosion, and acid.
High solids, low VOC.
Color: Cobalt Blue.
Size: 1 gal.

Tear, moisture, and solvent resistant.
Perfect for wet sanding.
Provides excellent cornering.
Try it for die cutting or custom jobs.
Clean removal means crisp paint lines.
Width: 2".
Length: 180 feet.

Amerlock 2 fast-drying surface tolerant epoxy. Adheres to tight rust and prepared damp surfaces. Provides great corrosion protection. Typically used on steel decks, hulls, and pipes. Color: Safety yellow. Size: 2 gal.

Single component acrylic polysiloxane.
Glossy topcoat with high solids and low VOC.
Provides better weathering than aliphatic polyurethane.
Easy application with brush, roller, or spray.

Color: "Brightwork Brown."

Size: 1 gal.

A professional dust extractor with a HEPA filter to provide you a dust-free sanding experience.
Equipped with a high-performance 1200 watt motor and a 1-stage turbine that creates 250 mbar suction with an airflow of 4500 l/min.
Features:
- 3 layers of dust protection and filtration
- Versatile accessories, work station, handle, and tool case fastening system
- One button push and clean flat filter cleaning
- Certified HEPA filter
- Easily accessible flat filter
- High volume container
- Hose storage
- AutoStart function.

Optimal foam thickness. Semi-open grain coating for less clogging and top performanc Will mitigate damage on profile sanding. For primer sanding or clear coats. Grit: 150D. Size: 6". 50 discs per box.

Self-polishing ablative antifouling paint.
Water-based and copper-free.
Easy to apply, cleans up with soap and water.
Combines 6% Econea biocide with slime-fighting zinc omadine.
Designed for multi-season protection.
Compatible with almost all bottom paints.
Safe for use on all substrates including steel and aluminum.
Color: Black.
Size: 1 gal.

The backing is a dense network of polyamide fabric threads. Designed for speed, efficiency and great dust extraction. Versatile to suit practically any application. Grit: 600. Size: 3". 50 discs per box.