High-gloss multi-purpose siloxane converter. Single component, used with PSX 700 resin. Provides great weather and chemical resistance. Resists moisture, humidity, corrosion, and acid. High solids, low VOC. Color: Clear. Size: 1 quart.

Indasa RhynaStick RedLine 2-3/4" sanding paper.
Recommended for sanding fillers, primers, wood and metal.
Aluminum oxide grit, P 600 C.
2-3/4" x 25 meter roll.

Quick hardening, non-separating, cream hardener.
Formulated for use with body fillers, specialty fillers and polyester finishing putties.
Color: White.
Size: 4 oz.

Multifunctional aliphatic polyurethane marine coating.
2 parts, ideal for use on prepared steel surfaces.
Low VOC, high gloss, self-priming, tough and flexible.
Gives good chemical and stain resistance.
Used on marine superstructures, boat decks, and more.
Color: "White."
Size: 1 gal.

"The Fooler" double-thick disposable paintbrush. Great for epoxy, resin, bottom paint and sealers. Design to hold more coating than the average brush. 100% white square bristles and sanded wood handle. Size: 1-1/2" bristles. Weight: .08 lb.

High-performance polyurethane adhesive/sealant. Tack-free in 1 hour, fully cures in 24 hours. Seal is very strong and waterproof. Easy to apply with a manual caulking gun. Won't sag or flow in seams. Color: White. Size: 11 oz. cartridge. Weight: .8 lb.

Industrial pail lid. Snaps into place, prys off (no gasket). Molded from HDPE for high strength. For use with 1 gallon plastic pails. Weight: .01 lb.

High-performance polyurethane adhesive/sealant.
Tack free in 48 hours, cures in 5-7 days.
Seal is very strong and waterproof.
Easy to apply with a manual caulking gun.
Won't sag or flow in seams.
 
Color: Black.

Size: 11 oz. cartridge.

High-performance polyurethane adhesive/sealant.
Tack free in 48 hours, cures in 5-7 days.
Seal is very strong and waterproof.
Easy to apply with a manual caulking gun.
Won't sag or flow in seams.

Color: Tan.

Size: 11 oz. cartridge.

High-performance polyurethane adhesive/sealant.
Tack free in 48 hours, cures in 5-7 days.
Seal is very strong and waterproof.
Easy to apply with a manual caulking gun.
Won't sag or flow in seams.

Color: White.

Size: 11 oz. cartridge.

Highly-rated, one-part polyurethane topside paint.
Improved by the addition of silicone for a brilliant shine.
Easy to apply and produces a lasting gelcoat-like finish.
Contains UV filters, which enhance the glossy look and feel.
Color: "Bikini Blue".
Size: Quart.

A lightweight, fast-curing, two-part epoxy putty.
For filling and smoothing surface imperfections.
Safe for use above and below the waterline.
An integral part of Pettit's gelcoat blister repair system.
Also used for leveling metal keels or other underwater areas.
Excellent chemical and water resistance.
Non-sagging, non-shrinking and easy to apply.
Color: Off-white.
Size: 1.5 quarts.

A lightweight, fast-curing, two-part epoxy putty.
For filling and smoothing surface imperfections.
Safe for use above and below the waterline.
An integral part of Pettit's gelcoat blister repair system.
Also used for leveling metal keels or other underwater areas.
Excellent chemical and water resistance.
Non-sagging, non-shrinking and easy to apply.
Color: Off-white.
Size: 8.5 ounces.

For smooth application of all resins and putties.
Flexible, durable and reusable.


3 different sizes per package.

Amercoat 214 low VOC antifouling paint.
Recommended where regulations ban/restrict organotin.
Long-lasting paint for fouling waters, up to 24 months.
High performance for heavy-duty service.
Contains 38% cuprous oxide.
Color: Blue.
Size: 1 gal.

Designed to fill and seal small cracks and gaps. May be applied with a straw or professional hose kit. Creates a rigid closed-cell foam barrier. Helps seal out drafts, noise, moisture and air. Size: 12 oz.

For touching up painting jobs. Pointed-edge trimmed black foam with a wood handle. Size: 3". Weight: .09 lb.

100% solids, two-component resin epoxy system.
1:1 ratio by volume.
Cures to a clear, glass-like finish that resists scratching.
Will not distort or blush with age.
Easy to use on table tops, bars and more.
Kit includes two 1 quart bottles.

Highly-rated, one-part polyurethane topside paint.
Improved by the addition of silicone for a brilliant shine.
Easy to apply and produces a lasting gelcoat-like finish.
Contains UV filters, which enhance the glossy look and feel.
 
Color: "Kelly Green".
 
Size: Quart.

High gloss, single-component paint. Especially formulated for use at the waterline. Provides outstanding protection against the weather. Fresh and salt water resistant. For use with fiberglass, steel, wood, or aluminum. Color: White. Size: 250 ml.

Flexible, stable latex-impregnated backing paper. Aluminum oxide grit for an excellent scratch pattern. Anti-slip coating on the back gives good grip during sanding For use on wood, filler, paint, and more. Grit: P600 A. 50 sheets per sleeve.

An "All-in-One" primer.
Single-part multipurpose primer for above the waterline.
Combines the features of separate substrate primers in one.
Adheres well to wood, fiberglass, metals on bare or painted surfaces.
Excellent covering capability, high build, good grain filling.
Provides corrosion protection on steel.
Color: White.
Size: 3/4 liter.

Hand-formed angular chiselled tip. Uniquely contoured hardwood handle. Brass ferrule. For use with enamels and varnishes. Size: 2-1/2" Weight: .1 lb.

Slow-speed epoxy hardener. Designed to be used with MAS epoxy resin. Ideal for jobs where increased working time is required. Low viscosity, slow cure. Resin:hardener 2:1 mix ratio. 27 minute pot life; 5 hour set time, 7 day cure time. Size: 1 pt. Weight: 1 lbs.

Low-viscosity resin Easy-flow low-drip blend of resin and reactive dilutents. No VOCs, no blush. Ideal for boat hull production, laminating, and bonding. 600 cps viscosity for smooth, easy wet-out laminations. To use, mix 2:1 resin:hardener with MAS hardener. Size: 1 gal. Weight: 9.4 lbs

For one-step grinding and finishing metal, wood, plastics.
No back-up pad needed for use.
Designed to last up to 20 times longer than fiber discs.
Grit: 60.
For rough finishing and surface blending.
Dimensions: 4-1/2 X 5/8"-11.

Low-viscosity resin
Easy-flow low-drip blend of resin and reactive dilutents.
No VOCs, no blush.
Ideal for boat hull production, laminating, and bonding. 600 cps viscosity for smooth, easy wet-out laminations.
To use, mix 2:1 resin:hardener with MAS hardener.
Size: 1 qt.

Ultra smooth foam cover.
Size: 4".
Two rollers per pack.

Slow-speed epoxy hardener. Designed to be used with MAS epoxy resin. Ideal for jobs where increased working time is required. Low viscosity, slow cure. Resin:hardener 2:1 mix ratio. 27 minute pot life; 5 hour set time, 7 day cure time. Size: 1/2 gal. Weight: 4.2 lbs.

Amercoat 229T is used as an above-water finish. Durable, tough epoxy, a colorful and glossy top coat. Resists soil and grime pickup; cleans easily. Use wherever corrosion resistance is needed. Color: Light Gray. Size: 1 gal.

ePaint epoxy primer converter.
Must be mixed with ePaint EP-PRIME resin.
Gives extraordinary corrosion resistance.
Used for prepping surfaces for ePaint bottom coating.
Size: 1 qt.

Calibrated resin pumps.
Set contains both the 8cc and 4cc pumps.
May be used with 1 quart, 1/2 gallon, 1 gallon, 4 gallon, and 5 gallon containers.

Contractor quality. For paint scraping and cleaning. Hardwood "shoe" handle. Steel bristles, 4 X 16 rows. Weight: .35 lb.