RhynoDryFibre high-efficiency 5" grinding discs. Recommended for grinding ferrous and non-ferrous metals. For use with low-speed sanders. Aluminum oxide grit, P 16. Size: 5" x 7/8" 25 discs per box.

Multi-purpose edge retentive epoxy coating.
Designed for direct-metal application.
Exceptional corrosion protection and edge coverage.
Surface tolerant, excellent adhesion to tight rust.
Fast-drying, low-temperature cure.
Color: Haze Gray.
Size: 5 gal.

RhynoDryFibre high-efficiency 5" grinding discs. Recommended for grinding ferrous and non-ferrous metals. For use with low-speed sanders. Aluminum oxide grit, P 24. Size: 5" x 7/8" 25 discs per box.

Designed for strength, flexibility, and weight. 2" wide. 150 feet per roll.

Amercoat 229T is used as an above-water finish. Durable, tough epoxy, a colorful and glossy top coat. Resists soil and grime pickup; cleans easily. Use wherever corrosion resistance is needed. Color: Medium Green. Size: 1 gal.

RhynoDryFibre high-efficiency 5" grinding discs. Recommended for grinding ferrous and non-ferrous metals. For use with low-speed sanders. Aluminum oxide grit, P 36. Size: 5" x 7/8" 25 discs per box.

Provides strong multi-season performance.
Powerful dual biocide for protection under all conditions.
Gives the benefits of both hard and ablative paints.
For fiberglass, wood or aluminum hulls.
Dries to a burnishable racing finish.
Hard, smooth surface is exvellent for trailered boats.
Contains 25% cuprous thiocyanate and 2.8% zinc pyrithione.
Color: Blue.
Size: 1 gal.

Rust-Oleum protective enamel spray paint. Provides long-lasting rust protection and beauty. Applies well to metal, wood, concrete, or masonry. A wide comfort spray tip makes application a breeze. Color: Gold Rush. Size: 12 oz. Weight: 1.11 lbs.

Amercoat 229T is used as an above-water finish.
Durable, tough epoxy, a colorful and glossy top coat.
Resists soil and grime pickup; cleans easily.
Use wherever corrosion resistance is needed.
Color: Clear.
Size: 1 qt.

Amercoat 229T is used as an above-water finish. Durable, tough epoxy, a colorful and glossy top coat. Resists soil and grime pickup; cleans easily. Use wherever corrosion resistance is needed. Color: Black. Size: 1 gal.

Plastic container lid. Keeps the contents of your quart container clean. For use with 2-1/2 quart plastic pails. Weight: .01 lb.

High-gloss multi-purpose siloxane coating. Two components combine into a unique epoxy. Provides great weather and chemical resistance. Resists moisture, humidity, corrosion, and acid. High solids, low VOC. Color: Clear, no tint. Size: 1 gal.

5 gallon pail with wire handle.
White HDPE plastic construction.
Meets FDA requirement 21 CFR 177.1520 for food containers.
(Excludes cooking applications).
Color: White.
Diameter: 11.9".
Height: 14.56".
Capacity: 5 gallons.

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

2 component epoxy-polyamide coating for use on sandblasted aluminum where maximum resistance to fresh or salt water is required
Smooth finish provides an excellent bonding surface for additional primers or topcoats
Excellent water, chemical and corrosion resistance for aluminum.
High performance Strontium chromate primer for all aluminum.
Size: .75 gallon kit.

Single-component yacht coating. Based on oil-modified alkyd resins. Ultra high gloss, superior flow and durability. Finish coat for wood, steel, aluminum, and fiberglass. For interiors and exteriors above the waterline. Color: Pearl Gray. Size: 750 ml.

SikaFlex 221 single-component polyurethane sealant/adhesive.
A popular fast-curing product.
Gives permanent elastic adhesion and great cut resistance.
Weather-resistant, sandable and paintable.
NSF-approved for potable water and food contact.
Tack-free in 60 minutes.
Color: Aluminum gray.
Size: 10.3 oz. cartridge.

Single-component yacht coating. Based on oil-modified alkyd resins. Ultra high gloss, superior flow and durability. Finish coat for wood, steel, aluminum, and fiberglass. For interiors and exteriors above the waterline. Color: Light Oyster. Size: 750 ml.

"The Fooler" double-thick disposable brush. Great for epoxy, resin, bottom paint and sealers. Design to hold more coating than the average brush. 100% white square bristles and sanded wood handle. Size: 1/2" bristles. Weight: .06 lb.

Mix'n Measure plastic container. Marked with measurements for easy mixing. Solvent resistant, safe for use with all paints. Color: White. Capacity: 2-1/2 quarts. Weight: .1 lb.

Single-component yacht coating. Based on oil-modified alkyd resins. Ultra high gloss, superior flow and durability. Finish coat for wood, steel, aluminum, and fiberglass. For interiors and exteriors above the waterline. Color: Classic Red. Size: 750 ml.

Single-component alkyd gloss topcoat. Designed to protect and enhance marine exteriors. Great weathering properties, easy to apply, drys quickly. Not meant to resist severe chemical or immersion conditions. Color: Signal Red. Size: 1 gal.

Amercoat 229T is used as an above-water finish. Durable, tough epoxy, a colorful and glossy top coat. Resists soil and grime pickup; cleans easily. Use wherever corrosion resistance is needed. Color: White. Size: 1 gal.

For locking and sealing high pressure systems. OEM specified. No particles to pollute fluid, foul valves, clog filters. Fittings: Hydraulic line, transmission fluid, PTO. Weight: .1 lb.

For caulking wooden boats. 40 lb. box. Also sold by the pound.

Amercoat 229T is used as an above-water finish. Durable, tough epoxy, a colorful and glossy top coat. Resists soil and grime pickup; cleans easily. Use wherever corrosion resistance is needed. Color: Dark Gray. Size: 1 gal. Weight: 14 lbs.

Rust-Oleum protective enamel spray paint. Provides long-lasting rust protection and beauty. Applies well to metal, wood, concrete, or masonry. A wide comfort spray tip makes application a breeze. Color: Aluminum. Size: 12 oz.

White cotton.
Used when sealing up the seams between planks on traditional wooden boats.
Packaged in 1 pound rolls, approximately 210 feet per pound.

Pure China flat top bristle. Unlacquered 14" reach hardwood handle. Tin ferrule with 45-degree bend. Use for industrial enamels in hard to reach places. Size: 2". Weight: .1 lb.

For general purpose grinding, cleaning, deburring. Attaches to hubs with nylon locking threads. For ferrous and non-ferrous metals. Aluminum oxide grit. Diameter: 3". 80 grit. 25 per box.

Semi-gloss multi-purpose epoxy coating. Provides salt and freshwater corrosion protection. Excellent adhesion to tight rust, self priming. Used on ballast tanks, bilges, and drainage pipes. Color: Buff. Size: 1 gal.

For general purpose grinding, cleaning, deburring. Attaches to hubs with nylon locking threads. For ferrous and non-ferrous metals. Aluminum oxide grit. Diameter: 3". 24 grit. 25 per box.

For general purpose grinding, cleaning, deburring. Attaches to hubs with nylon locking threads. For ferrous and non-ferrous metals. Aluminum oxide grit. Diameter: 3". 36 grit. 25 per box.

A low viscosity epoxy wood sealer, primer, and consolidator.
Very easy to use.
For repair / restoration of rotted, dried-out, spongy wood.
Creates a sound, waterproof base for filler putty.
Includes a measuring/application bottle.
Low odor, solvent free.
Flows well for superior penetration.
Mixes in a simple 2:1 ratio.
May be used on damp, "punky" or desiccated wood.
Size: 1.5 quart kit.