Polyester film backing material.
Designed to be a flexible, smooth abrasive.
Resistant to clogging.
Great for hard tooling gelcoats and scratch-resistant clear.
Manufactured using environmental-friendly coating system.
Suitable for wet or dry sanding.
Grit: 800.
Size: 5".
50 discs per box.

Single component acrylic polysiloxane. Glossy topcoat with high solids and low VOC. Provides better weathering than aliphatic polyurethane. Easy application with brush, roller, or spray. Color: "Ocean Fish Blue." Size: 1 gal. Weight: 12.6 lbs.

'Wood Flour' is ground and filtered natural bark. Mixes with epoxy to form a wood-colored, sandable surface. Simply add Wood Flour until desired consistancy is reached. Used when a hard solid for filling and filleting is required Size: 1/2 gal. Weight: 1 lb.

Single-component alkyd gloss topcoat. Designed to protect and enhance marine exteriors. Great weathering properties, easy to apply, drys quickly. Not meant to resist severe chemical or immersion conditions. Color: Buff Brown. Size: 1 gal.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "Safety Blue." Size: 1 gal.

Milled fibers (1/32" milled fiberglass). Used when epoxy must fill a void and provide extremely high strength and resistance to cracking. Ideal for structural filleting and hardware bonding. Simply add to mixed epoxy. Size: 1/2 gallon. Weight: .2 lbs.

Phenolic micro balloons, organic phenolic hollow spheres Low density, lightweight epoxy additive. Used when sandable, paint-ready surfaces are required. Ideal for fairing. Size: 1/2 gallon. Weight: .6 lbs.

CAB-O-SIL fumed colloidal silica. Adds strength to epoxies. Creates an extremely hard, high-density solid finish. Ideal for structural bonding, filling, and filleting. Simply add into mixed epoxy. Absolutely clear finish when dry; no white residue. Size: 1/2 gallon. Weight: .25 lbs.

Amerlock 2 fast-drying surface-tolerant epoxy kit. Adheres to tight rust and prepared damp surfaces. Provides great corrosion protection. Typically used on steel decks, hulls, and pipes. Color: GR-2 Medium Gray. Size: 2 gal.

Single-component alkyd gloss topcoat. Designed to protect and enhance marine exteriors. Great weathering properties, easy to apply, drys quickly. Not meant to resist severe chemical or immersion conditions. Color: Deep Gray. Size: 1 gal.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "1979 Safety Purple". Size: 1 gal.

Soft badger-style pure China bristle. Hand formed chisel tip. Unlacquered hardwood round peg handle. Stainless steel ferrule. Size: 1-1/2" Weight: .1 lb.

Premium quality, brush grade, neoprene-based contact cement. High strength, works great for many projects. Fast-drying formula dries in 15-20 minutes. Offers high heat and water resistance when dry. Exceeds industry performance requirements. Color: Tan. Size: 16 oz.

Double-coated mounting tape. Aggressively tacky and strong. Gives an immediate permanent bond to many surfaces. Great for displays, photographs, shrink film, and more. Size: 1" X 36 yards Color: Natural. Weight: .49 lb.

"5-to-1" hardener, designed for bonding and coating wood. Provides superb penetrating power. Has superior moisture resistance and high strength. Must be combined with a MAS 521 resin. Size: 1 pt.

RhynoGrip Red Line high-efficiency 3" sanding discs.
Sanding and finishing of fillers, primers, and wood.
Lubricated for high performance.
Aluminum oxide grit, P 320 A.
Diameter: 3". 50 discs per box.

White Line 6" solid grip discs. Recommended for sanding and finishing of fillers and wood. Lubricated with anti-clogging solution. Aluminum oxide grit, P 400 C. C weight paper. 50 discs per box.

"5-to-1" hardener, designed for bonding and coating wood Provides superb penetrating power. Has superior moisture resistance and high strength. Must be combined with a MAS 521 resin. Size: 1 qt.

Smoothes and finishes a bead of caulk for a pro finish. Also reseals cartridge for storage and reuse.

Optimal foam thickness. Semi-open grain coating for less clogging. Will mitigate damage on profile sanding. For primer sanding or clear coats. Aluminum oxide grit: 800C. Size: 5". 50 discs per box.

Blade attaches to hand masker. Designed to cut masking film and masking paper. 12".

Rust-Oleum protective enamel spray paint. Provides long-lasting rust protection and beauty. Applies well to metal, wood, concrete, or masonry. A wide comfort spray tip makes application a breeze. Color: Sand. Size: 12 oz. Weight: 1.11 lbs.

Single-component alkyd gloss topcoat. Designed to protect and enhance marine exteriors. Great weathering properties, easy to apply, drys quickly. Not meant to resist severe chemical or immersion conditions. Color: Alpine Green. Size: 1 gal.

Amercoat 229T is used as an above-water finish. Durable, tough epoxy, a colorful and glossy top coat. Resists soil and grime pickup; cleans easily. Use wherever corrosion resistance is needed. Color: RT-1805 Light Green. Size: 1 gal.

Amercoat 229T is used as an above-water finish. Durable, tough epoxy, a colorful and glossy top coat. Resists soil and grime pickup; cleans easily. Use wherever corrosion resistance is needed. Color: Signal Yellow. Size: 1 gal.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "16408 Light Gray." Size: 1 gal.

Amerlock 2 fast-drying surface tolerant epoxy. Adheres to tight rust and prepared damp surfaces. Provides great corrosion protection. Typically used on steel decks, hulls, and pipes. Color: Safety blue. Size: 2 gal.

Designed for strength, resilience, flexibility. Will give controlled wet-out and excellent laminate properti Very lightweight, resistant to weather, heat, and corrosion. Roving weave, 24 oz. fabric. 38" wide.

Replacement filter element for MV-912 and MV-412 vacuums. 5-1/2" ID. 7-1/4" OD.

Gorilla fast-dry glue. Formulated to cure in 30-60 minutes. Very strong, same strength and Gorilla Glue original. Versatile; for household use and building projects. 100% waterproof and temperature resistant. Size: .25 oz. Weight: .12 lb.

Gorilla fast-dry glue. Formulated to cure in 30-60 minutes. Very strong, same strength and Gorilla Glue original. Versatile; for household use and building projects. 100% waterproof and temperature resistant. Size: 2 oz. Weight: .2 lb.

RhynoGrip Red Line high-efficiency 3" sanding discs.
Sanding and finishing of fillers, primers, and wood.
Lubricated for high performance.
Aluminum oxide grit, P 240 A.
Diameter: 3".
50 discs per box.

A strong, medium-body resin Designed for filleting, laminating, and gluing. Ideal for general-purpose gluing applications where wet-out of fiberglass is not a consideration. Perfect for all your filleting and fairing needs. The medium viscosity works well with fillers. gluing slurries and filleting systems are required. Size: 1/2 gal. Weight: 5 lbs.

Red Line 8" self-adhering solid grip discs. Recommended for sanding and finishing of fillers and wood. Aluminum oxide grit, P 220 C. Lubricated with anti-clogging solution. C weight paper. 50 discs per box. Weight: .01 lbs. each.