Fiberfiller is an advanced, polyester-based ortho-structural putty.
Used for general purpose bonding.
Combined with glass fiber for strength.
Does not contain any wax.
May be used with MEKP catalyst.

A thixotropic polyester resin.
Designed for fabrication of small to large FRP parts.
Pre-promoted for curing at room temperature with MEKP.
Orca 200 can be applied by spray-up or hand lay.
Size: 5 gallon.

A strong, medium-body resin Designed for filleting, laminating, and gluing. Ideal for general-purpose gluing applications where wet-out of fiberglass is not a consideration. Perfect for all your filleting and fairing needs. The medium viscosity works well with fillers, gluing slurries and filleting systems. Size: 1 quart. Weight: 2.3 lbs.

"5-to-1" hardener, designed for bonding and coating wood. Provides superb penetrating power. Has superior moisture resistance and high strength. Must be combined with a MAS 521 resin. Size: 1 pt.

Rapid-cure epoxy hardener. Designed to be used with MAS epoxy resin. Ideal for bonding jobs, spot filling, and fairing. Gels and sets quickly at room temperature. Add to Slow or Medium hardener for custom cure times. Low viscosity, fast cure, very strong. Resin:hardener 2:1 mix ratio. 7 minute pot life; 2 hour set time, 2-5 day cure time. Size: 1/2 ga. Weight: 8 lbs.

Rapid-cure epoxy hardener. Designed to be used with MAS epoxy resin. Ideal for bonding jobs, spot filling, and fairing. Gels and sets quickly at room temperature. Add to Slow or Medium hardener for custom cure times. Low viscosity, fast cure, very strong. Resin:hardener 2:1 mix ratio. 7 minute pot life; 2 hour set time, 2-5 day cure time. Size: 1 pt. Weight: 1.2 lbs.

A thixotropic, glycol-isophthalic polyester gelcoat. For spray applications. Designed for pigmented, medium to highly chromatic colors. Color: Gray. Size: 1 gal.

Pourable, self-leveling bar and tabletop coating.
Easy to apply and cures crystal clear.
Exceptionally tough.
Scratch resistant, waterproof, alcohol proof.
100% solids, no solvents, low odor.
Can be applied over wood, ceramic, stone, concrete and more.
Size: 3 quarts.

Moderately reactive epoxy hardener. Designed to be used with MAS epoxy resin. Gels and sets quickly enough for controlled application. Manufacturer suggests overnight cure before sanding. Low viscosity, moderate cure. Resin:hardener 2:1 mix ratio. 23 minute pot life; 4 hour set time, 2-7 day cure time. Size: 1 gal. Weight: 4 lbs.

Permanently repairs nicks, gouges and scratches.

For use on counters, tubs, sinks, decks, hulls.
Six colors help you match any color of gelcoat.
Hardens in one hour.

Kit includes:
- Colors
- Polyester gel coat paste
- Hardener
- Release film
- Blending chart and instructions.

Moderately reactive epoxy hardener.
Designed to be used with MAS epoxy resin.
Gels and sets quickly enough for controlled application.
Manufacturer suggests overnight cure before sanding.
Low viscosity, moderate cure.
Resin : hardener 2:1 mix ratio.
23 minute pot life; 4 hour set time, 2-7 day cure time.
Size: 1 gal.

Moderately reactive epoxy hardener.
Designed to be used with MAS epoxy resin.
Gels and sets quickly enough for controlled application.
Manufacturer suggests overnight cure before sanding.
Low viscosity, moderate cure.
Resin:hardener 2:1 mix ratio.
23 minute pot life; 4 hour set time, 2-7 day cure time.
Size: 1 pt.

Penetrates deep into wood surfaces. Adds strength, structure, and restores rotten wood. A two-part kit, resin and hardener. Size: 1.5 qt.

Penetrates deep into wood surfaces. Adds strength, structure, and restores rotten wood. A two-part kit, resin and hardener. Size: 1.5 pt.

The original System Three general purpose epoxy hardener.
Does not contain any VOCs, solvent-free.
Has excellent pot life and cure-time control.
Type: #2, Medium.
Provides a tack-free thin film in 4-6 hours @ 77° F (25° C).
Size: 1/2 gallon.

100% solids, two-component resin epoxy system.
1:1 ratio by volume.
Cures to a clear, glass-like finish that resists scratching.
Will not distort or blush with age.
Easy to use on table tops, bars and more.
Kit includes two 1 quart bottles.

Slow-speed epoxy hardener. Designed to be used with MAS epoxy resin. Ideal for jobs where increased working time is required. Low viscosity, slow cure. Resin:hardener 2:1 mix ratio. 27 minute pot life; 5 hour set time, 7 day cure time. Size: 1 pt. Weight: 1 lbs.

Low-viscosity resin Easy-flow low-drip blend of resin and reactive dilutents. No VOCs, no blush. Ideal for boat hull production, laminating, and bonding. 600 cps viscosity for smooth, easy wet-out laminations. To use, mix 2:1 resin:hardener with MAS hardener. Size: 1 gal. Weight: 9.4 lbs

Low-viscosity resin
Easy-flow low-drip blend of resin and reactive dilutents.
No VOCs, no blush.
Ideal for boat hull production, laminating, and bonding. 600 cps viscosity for smooth, easy wet-out laminations.
To use, mix 2:1 resin:hardener with MAS hardener.
Size: 1 qt.

Slow-speed epoxy hardener. Designed to be used with MAS epoxy resin. Ideal for jobs where increased working time is required. Low viscosity, slow cure. Resin:hardener 2:1 mix ratio. 27 minute pot life; 5 hour set time, 7 day cure time. Size: 1/2 gal. Weight: 4.2 lbs.

Best for repair of fiberglass and metal surfaces.
Will rebuild rotted-out areas on fenders, body sections and rocker panels.
Also used for forming special customized shapes.

Kit #637 contains:
- 8 fl.oz. resin
- 1/4 oz. liquid hardener
- 3 sq. ft. fiberglass cloth
- mixing stick, plastic spreader, mixing tray and instructions.

Blends with polyester or epoxy resins.

Appropriate for gels, pastes, and putties.
Try it with Skid-No-More, Evercoat, or Formula 27.

Color: Admiral blue.

1 oz.

Blends with polyester or epoxy resins.

Appropriate for gels, pastes, and putties.
Try it with Skid-No-More, Evercoat, or Formula 27.
 
Color: Black.

1 oz.

Blends with polyester or epoxy resins.
 
Appropriate for gels, pastes, and putties.
Try it with Skid-No-More, Evercoat, or Formula 27.

Color: Sunset Yellow.

1 oz.

Blends with polyester or epoxy resins.

Appropriate for gels, pastes, and putties.
Try it with Skid-No-More, Evercoat, or Formula 27.

Color: Brown.

1 oz.

Blends with polyester or epoxy resins.

Appropriate for gels, pastes, and putties.
Try it with Skid-No-More, Evercoat, or Formula 27.

Color: Tropical Red.

1 oz.

A general-purpose economy finish resin.
 
Has excellent wet ability and good strength.
Must be used with Sea-Glass fiberglass fabrics to ensure proper cure.
Can be tinted with Evercoat Coloring Agents, but may not yield an exact color match.

This resin can be used on most wood, fiberglass and some metal.

Liquid hardener is included.

Size: 1 gallon.

Blends with polyester or epoxy resins.

Appropriate for gels, pastes, and putties.
Try it with Skid-No-More, Evercoat, or Formula 27.

Color: White.

1 oz.

Low-viscosity epoxy crack filler.
Creates a water and weather resistant bond.
Excellent adhesion and flow for quick repairs.
For gluing and repairing concrete, brick, acrylic, glass, steps, sidewalks, foundations, walls, and more.
Fits standard caulking gun.
Sets in 25 - 30 minutes.
Size: 185 ml.

A low viscosity epoxy wood sealer, primer, and consolidator.
Very easy to use.
For repair / restoration of rotted, dried-out, spongy wood.
Creates a sound, waterproof base for filler putty.
Includes a measuring/application bottle.
Low odor, solvent free.
Flows well for superior penetration.
Mixes in a simple 2:1 ratio.
May be used on damp, "punky" or desiccated wood.
Size: 1.5 quart kit.

A low viscosity epoxy wood sealer, primer, and consolidant.
Very easy to use.
For repair / restoration of rotted, dried-out, spongy wood.
Creates a sound, waterproof base for filler putty.
Includes a measuring/application bottle.
Low odor, solvent free.
Flows well for superior penetration.
Mixes in a simple 2:1 ratio.
May be used on damp, "punky" or desiccated wood.
Size: 1.5 pint kit.

A wax and styrene monomer solution.
Use to help surface curing.
Add it to resin or gel coat at rate of 4 oz. per gallon.