A unique two part epoxy primer coating.
Helps to prevent and repair gelcoat blistering.
Protects fiberglass hulls from water absorption.
Gives excellent barrier coat protection.
Contains "micro-plates" for extra protection.
Works as an anti-corrosive substrate primer for metals.
Dries quickly, with a short re-coat time.
Color: White.
Size: 1 gallon kit.

A unique two part epoxy primer coating.
Helps to prevent and repair gelcoat blistering.
Protects fiberglass hulls from water absorption.
Gives excellent barrier coat protection.
Contains "micro-plates" for extra protection.
Works as an anti-corrosive substrate primer for metals.
Dries quickly, with a short re-coat time.
Color: White.
Size: 1 quart kit.

Single-component low VOC universal primer.
May be used on both ferrous and galvanized metal.
Fast-drying properties.
Excellent corrosion resistance.
May be top coated.
Lead and chromate free
High volume of solids.

Converts rust into a barrier layer of magnetite. A bonding agent for epoxy, acrylic, and oil-based finishes. Gives exceptional bonding with moisture cured polyurethanes. May be used as a rust converter, or paint / etch primer. Eliminates the need to mechanically blast to white metal. Not for use with zinc chromates or zinc phosphates. Size: 1 qt. Coverage: Approximately 50 square feet, at 10 mil.

Inter-Prime wood sealant. Suitable for either interior or exterior use. Stops varnish from soaking into the wood and seals grain. Helps varnish or paint to dry without "high" and "low" spots Recommended for sealing plywood to resist cracking.

2 component epoxy-polyamide coating for use on sandblasted aluminum where maximum resistance to fresh or salt water is required
Smooth finish provides an excellent bonding surface for additional primers or topcoats
Excellent water, chemical and corrosion resistance for aluminum.
High performance Strontium chromate primer for all aluminum.
Size: .75 gallon kit.

White undercoated smoothes out any surface.
Base coat for aged, cracked, pitted surfaces
For fiberglass, wood, previously painted surfaces.
Dries quickly - easy to sand.
Use Pettit 120 brushing thinner.

White Easypoxy undercoater.
Smoothes out any surface.
A base coat for aged, cracked, pitted surfaces.
Use it on fiberglass, wood, previously painted surfaces.
Dries quickly and is easy to sand.
Mixes with Pettit 120 brushing thinner.
Size: 1 gallon.

A heavy-duty two-part coating.
May be used on practically any part of a boat.
Excellent for protecting underwater metal from corrosion.
Forms a tight, durable chemical-resistant film.
56% solids by volume.
Size: 1 gallon kit

Inhibits corrosion: use only on bare metals!
For use above or below waterline.
Dried film is 93% zinc.
Do not apply anti-fouling paint over zinc coat.

ePaint Multi-Purpose epoxy primer.
A robust, easy-to-use two part primer.
Perfect as a base coat for ePaint antifouling paint.
Provides water migration and corrosion protection.
Compatible with bottom paints, easy to apply.
Size: 1 gal.
Color: White.