Combination of several solvents, some are slow to evaporate from surface of gel coat being wiped This is an important aspect as wax contaminants must stay in solution to be wiped from surface before it dries Use: excellent parts clean-up & multi-purpose wipe down Weight: 8.2 lbs

A combination of several solvents. For cleaning gel coat. Excellent for part clean-up and wipe down. Size: 1 quart.

A clear solution specially formulated for mixing with Interlux 1-part finishes and varnishes to produce a variety of gloss, satin or matte effects. For interior or exterior use Weight: 2.2 lbs

Amercoat 911 thinner. n-Butyl acetate. Flash point: 76 degrees F. Size: 1 gal. Weight: 7.25 lbs.

A high quality thinner for brush or roller applications.
Double distilled for maximum purity.
For single-component paints and varnishes.
Size: 1 liter

A fast evaporating solvent which when added to specific paints improves drying in cold climates and facilitates spray application. Also recommended for removing sanding residue from boat bottoms, wiping bare metal clean and general clean up of paint equipment. For use with most single part topside and antifouling paints Weight: 2 lbs

Preperation 88 marine water-based cleaner. Cleans soiled and chalked surfaces. Dramatically improves aged recoatability. Ideal for cleaning surfaces before drydock painting. Size: 1 gal. Weight: 9.14 lbs.

Amercoat 851 flow control additive. Use with Amershield, Amercoat 450HS or Amercoat 450SA. Provides a smooth coating and improves topcoat appearance. Mix Ratio: One 1/2 pint of 851 to each gallon of topcoat. Size: 1/2 pt. Weight: .6 lbs.

Use with specified Ameron products. Thinner or for clean up. Flashpoint: 76 degrees F. Weight: 7.25 lbs.

A highly effective thinner.
For use with polyester and epoxy resins, ink, adhesives, contact cement, fiberglass and more.
Evaporates quickly and leaves no residue.
Great for cleaning up latex paint or lacquer.
Size: 5 gal.

Flexabar buoy coating thinner and surface cleaner. For use with Flexabar UV resistant buoy marker paint. Ideal for cleaning buoy surfaces before marking. Used by commercial fishermen worldwide. Size: 1 quart. Weight: 2.45 lbs.

Designed to use with marine paints and varnishes.
Stronger solvent properties and slower evaporation.
Helps paint retain a "wet" edge for longer time.
Cleans brushes after painting.

Designed to use with marine paints and varnishes.
Stronger solvent properties and slower evaporation.
Helps paint retain a "wet" edge for longer time.
Cleans brushes after painting.
1 quart.

Penetrol oil-based paint additive. Makes painting projects easier by making paint flow easier. Eliminates brush and roller marks. Increases paint adhesion to prevent peeling and blistering. Use with oil and alkyd paints Size: 1 quart.

Produces a hot, clean, smokeless flame for marine stoves.
Size: 1 quart.

Sorry, no sales to these states: CA, CO, CT, DE, MD, MI, NH, NY, OH, RI, UT. 

Bio-Blue hull surface preperant #92.
De-waxes, cleans, etches.
Easy to use.
Biodegradable and solvent free.
Prepares bare fiberglass hulls for painting.
Size: 1 qt.

A great choice for thinning lacquer and epoxy coatings.
May be used for cleaning brushes after projects.
Size: 1 qt.

Sorry, no sales to these states: CA, CO, CT, DE, MD, MI, NH, NY, OH, RI, UT. 

Bio-Blue hull surface preperant #92.
De-waxes, cleans, etches.
Easy to use.
Biodegradable and solvent free.
Prepares bare fiberglass hulls for painting.
Size: 1 gal.

Preperation 88 marine water-based cleaner. Cleans soiled and chalked surfaces. Dramatically improves aged recoatability. Ideal for cleaning surfaces before drydock painting. Size: 5 gal.

A high quality thinner for brush or roller applications. Double distilled for maximum purity. For single-component paints and varnishes Size: 1/2 liter.

Slow evaporating solvent for use in specific two-part polyurethane and epoxy products. Refer to the specific product directions for the amount to be used. Weight: 2 lbs

A highly effective thinner.
For use with polyester and epoxy resins, ink, adhesives, contact cement, fiberglass and more.
Evaporates quickly and leaves no residue.
Great for cleaning up latex paint or lacquer.
Size: 1 gallon.

A multi-purpose additive or stand alone coating. Based on a selection of natural oils. Suitable for use with single-component varnishes and paints. Optimizes saturation and surface preservation. Helps to prevent rust on steel. Size: 1 liter.

Produces a fast drying time, but not as fast as acetone. 
A good choice for thinning specific coatings. 
OK for polyester and epoxy resins, ink, and adhesives. 
Will clean up latex pain, lacquer, and adhesives. 
Size: 1 gal. 

Sorry, no sales to these states: CA, CO, CT, DE, MD, MI, NH, NY, OH, RI, UT.

Designed to be added to epoxy resin and cure mixtures. Please consult literature before mixing. Will darken light colors of coatings. Size: 1/2 pint.

Amercoat chemical accelerator. Quickens hardening at low temperatures. Used with Amershield or Amercoat 450HS. See MSDS for further instructions. Size: 1 half pint. Weight: .6 lbs.

A resin-based additive for speeding up the curing process. For use in traditional one-part paints and varnishes. May be added for a harder, more scratch-resistant finish. Do not use with Epifanes Mono-urethane or Nautiforte. Size: 1/2 liter.

Touluene/acetone cleaner/thinner. Compliant with SCAQMD Rule 1171. Flash point: 2 degrees F. Size: 1 gal.

Thinner for spray applications. Used with single-component primers, paints, varnishes. Highly suited for degreasing wood and painted surfaces. Size: 1 liter.

Use with specified Ameron products. Thinner or for clean up. Flashpoint: 76 degrees F

Slow-drying solvent Eases brushing and improves flow. Use only in products when specified. Size: 1 quart.

A multi-purpose additive or stand alone coating. Based on a selection of natural oils. Suitable for use with single-component varnishes and paints. Optimizes saturation and surface preservation. Helps to prevent rust on steel. Size: 1/2 liter.

A highly effective thinner. 
For use with polyester and epoxy resins, ink, adhesives, contact cement, fiberglass and more. 
Evaporates quickly and leaves no residue. 
Great for cleaning up latex paint or lacquer. 
Size: 1 quart. 

"Nature's Solvent" - distilled from tree resins.
A traditional choice for thinning art-grade oil paints.
Not for sale or use in California.
Size: 1 qt.

ePaint EP-STRIP bottom paint and varnish remover and stripper.
Softens anti-fouling paints and varnishes for simple removal.
Will soften 4 - 5 layers of old paint per application.
May be used on fiberglass, steel, aluminum and wood.
Eco-friendly biodegradable formula.
Non-caustic and methylene chloride-free.
Water-based, low-odor; no harsh chemical smell.
May be rolled, brushed, or sprayed.
Simply mix, apply, let dwell, then scrape off the old paint.
(Make sure you test on a small area first to determine the proper dwell and removal times.)
No neutralization required during clean-up, just soap and water.
Size: 1 gal.