Amercoat 229T is used as an above-water finish. Durable, tough epoxy, a colorful and glossy top coat. Resists soil and grime pickup; cleans easily. Use wherever corrosion resistance is needed. Color: Oxide Red. Size: 1 gal.

Amercoat 229T is used as an above-water finish. Durable, tough epoxy, a colorful and glossy top coat. Resists soil and grime pickup; cleans easily. Use wherever corrosion resistance is needed. Color: ANSI 70 Gray. Size: 1 gal.

Amercoat 229T is used as an above-water finish. Durable, tough epoxy, a colorful and glossy top coat. Resists soil and grime pickup; cleans easily. Use wherever corrosion resistance is needed. Color: Off-White. Size: 1 gal.

Amercoat 229T is used as an above-water finish. Durable, tough epoxy, a colorful and glossy top coat. Resists soil and grime pickup; cleans easily. Use wherever corrosion resistance is needed. Color: Seattle Marine Green. Size: 1 gal.

Amercoat PSX 892HS engineered siloxane. Self-curing, heat-resistant siloxane coating. Used over Dimetcote 9 or 9HS primer. Not recommended for thermal cycling. Color: Aluminum. Size: 1 gal.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "Horizon Blue." Size: 1 gal.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "Bright Blue." Size: 5 gal.

Single-component alkyd gloss topcoat. Designed to protect and enhance marine exteriors. Great weathering properties, easy to apply, drys quickly. Not meant to resist severe chemical or immersion conditions. Color: 2968 Dark Gray. Size: 1 gal.

Amerlock 2 is a fast-drying surface tolerant epoxy. Adheres to tight rust and prepared damp surfaces. Catalyst helps cure and set epoxy resin. Size: 2-1/2 gal.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "Offshore Yellow." Size: 1 gal.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "Off-White." Size: 1 gal.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "RD-1 Bright Red." Size: 5 gal.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "Safety Orange." Size: 1 gal.

Amercoat 229T is used as an above-water finish. Durable, tough epoxy, a colorful and glossy top coat. Resists soil and grime pickup; cleans easily. Use wherever corrosion resistance is needed. Color: National Blue. Size: 1 gal.

Traditional alkyd-based yacht enamel.
Bright high gloss finish
Excellent flow and leveling properties
Superior hide, gloss and color retention.

Traditional alkyd-based yacht enamel
Bright high gloss finish
Excellent flow and leveling properties
Superior hide, gloss and color retention

Amercoat 229T is used as an above-water finish. Durable, tough epoxy, a colorful and glossy top coat. Resists soil and grime pickup; cleans easily. Use wherever corrosion resistance is needed. Color: White. Size: 5 gal.

Single component acrylic polysiloxane. Glossy topcoat with high solids and low VOC. Provides better weathering than aliphatic polyurethane. Easy application with brush, roller, or spray. Color: "Ocean Fish Blue." Size: 1 gal. Weight: 12.6 lbs.

Single-component alkyd gloss topcoat. Designed to protect and enhance marine exteriors. Great weathering properties, easy to apply, drys quickly. Not meant to resist severe chemical or immersion conditions. Color: Buff Brown. Size: 1 gal.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "Safety Blue." Size: 1 gal.

Amerlock 2 fast-drying surface-tolerant epoxy kit. Adheres to tight rust and prepared damp surfaces. Provides great corrosion protection. Typically used on steel decks, hulls, and pipes. Color: GR-2 Medium Gray. Size: 2 gal.

Single-component alkyd gloss topcoat. Designed to protect and enhance marine exteriors. Great weathering properties, easy to apply, drys quickly. Not meant to resist severe chemical or immersion conditions. Color: Deep Gray. Size: 1 gal.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "1979 Safety Purple". Size: 1 gal.

Single-component yacht coating. Based on oil-modified alkyd resins. Ultra high gloss, superior flow and durability. Finish coat for wood, steel, aluminum, and fiberglass. For interiors and exteriors above the waterline. Color: Jade Green. Size: 750 ml.

Single-component yacht coating. Based on oil-modified alkyd resins. Ultra high gloss, superior flow and durability. Finish coat for wood, steel, aluminum, and fiberglass. For interiors and exteriors above the waterline. Color: Blue Gray. Size: 750 ml.

Single-component yacht coating. Based on oil-modified alkyd resins. Ultra high gloss, superior flow and durability. Finish coat for wood, steel, aluminum, and fiberglass. For interiors and exteriors above the waterline. Color: Mahogany. Size: 750 ml.

Multi-purpose edge retentive epoxy coating.
Designed for direct-metal application.
Exceptional corrosion protection and edge coverage.
Surface tolerant, excellent adhesion to tight rust.
Fast-drying, low-temperature cure.
Color: Light Gray.
Size: 5 gal.

Catalyst for two-part Amerlock epoxy sealer. Used for marginally prepared steel and old coatings. Excellent resistance to corrosive environments. Size: 1 gal. Weight: 8.5 lbs.

Highly-rated, one-part polyurethane topside paint.
Improved by the addition of silicone for a brilliant shine.
Easy to apply and produces a lasting gelcoat-like finish.
Contains UV filters, which enhance the glossy look and feel.
 
Color: "Black".
 
Size: Gallon.

Highly-rated, one-part polyurethane topside paint.
Improved by the addition of silicone for a brilliant shine.
Easy to apply and produces a lasting gelcoat-like finish.
Contains UV filters, which enhance the glossy look and feel.
 
Color: "Black".
 
Size: Quart.

Superior base coat adhesive/sealant Apply to all types of decks Can be used with porous fabric May be tinted with universal colorants Similar to the old Flex-i-deck - No thinning required. Dries to touch in 1 to 2 hrs., recoat 24 hrs.

Amerlock 2 fast-drying surface tolerant epoxy. Adheres to tight rust and prepared damp surfaces. Provides great corrosion protection. Typically used on steel decks, hulls, and pipes. Color: Haze gray. Size: 2 gal. Weight: 26.25 lbs.

Interlux Brightside polyurethane paint. For striping and boottops. Infused with Fluro microadditive for abrasion resistance. Easy to clean, resists stains. For applications above the waterline. High gloss. Appropriate for aluminum, wood, steel, and more. Suitable for high fouling areas. Color: Flag Blue. Size: 1 quart. Weight: 2.2 lb.