Ancor primary wire, 14 AWG. Manufactured from tinned copper for corrosion prevention. Insulated with a flexible proprietary vinyl coating. Resists cold, salt water, UV rays, and many petrochemicals. Color: Black. Length: 18 feet

Stainless steel construction.
Marine-grade silicone squeegee.
Durable and designed for a long life of use.
Works well on curved windshields.
Length: 16".

Four position rotary switch. For all 200H, 300H, 400H, and 500H hydronic heaters. Includes: - Knob - Four-position switch - Washer.

All stainless steel and marine-grade silicone construction.
Designed with extra squeegee "claws" to spread pressure evenly over the length of the blade, allowing the blade to conform to a curved windshield.
Length: 18".

Brass, nylon and polycarbonate construction. Has a manual reset button. For use with higher amperage accessories. Splash proof. #10-32 studs and nuts. For 12 or 24 volt systems. Rated for 20 amps. Display packaged.

20 AMP Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers allow creation of common circuits Weight: .13 lb

20 AMP Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers allow creation of common circuits Weight: .06 lb

Closed back design. Constructed from nylon and nickel-plated brass. Completely insulates power from mounting surfaces. Each screw pair is one isolated circuit. Jumpers allow the creation of common circuits. Rated for 20 amps.

Ancor primary wire, 16 AWG. Manufactured from tinned copper for corrosion prevention. Insulated with a flexible proprietary vinyl coating. Resists cold, salt water, UV rays, and many petrochemicals. Color: White. Length: 500 feet.

Features: - UV resistant lens and housing - Multiple LED light source - Pre-wired with 2.5 meters of marine-grade cable. Multi-volt 9-33 volt DC. Visible for up to three nautical miles. Housing: Black. Color: Red, port.

Features:
- Low power consumption
- Long service life
- 100% sealed design.
For towing.
Black housing.
Rated for 8 - 28 volts DC (Multivolt).
Pre-wired with 2.5 meters (8.2 feet) of marine-rated wire.
Pre-drilled for secure mounting.
Color: Amber.
Overall dimensions: 71mm X 53mm X 33mm (2.79" X 2.08" X 1.29").

Safety duplex cable, 12/2 AWG. Manufactured from tinned copper for corrosion prevention. Covered with an anti-abrasive, easily-removed outer jacket. Resists cold, salt water, UV rays, and many petrochemicals. Color-coded red and yellow inner conductor wire. Length: 100 feet per spool.

Standard AGC fuses. Brass and glass construction. Rated for 4 amps. Dimensions: 1/4" X 1-1/4". Five fuses per set.

Safety duplex cable, 12/2 AWG. Manufactured from tinned copper for corrosion prevention. Covered with an anti-abrasive, easily-removed outer jacket. Resists cold, salt water, UV rays, and many petrochemicals. Color-coded red and yellow inner conductor wire. Length: 500 feet per spool.

Designed specifically for AIS transceivers.
Sealed, tin-plated copper wire coil.
Stainless steel body and 36" whip.
SO-239 connector.
Mounts with supplied stainless steel "L" bracket.

Ancor primary wire, 16 AWG. Manufactured from tinned copper for corrosion prevention. Insulated with a flexible proprietary vinyl coating. Resists cold, salt water, UV rays, and many petrochemicals. Color: Red. Length: 100 feet.

Brass, nylon and polycarbonate construction. Has a manual reset button. For use with higher amperage accessories. Splash proof. #10-32 studs and nuts. For 12 or 24 volt systems. Rated for 40 amps. Display packaged.

Universal continous duty solenoid. Insulated. 85A rating. Normally open, 200A carry only. Plasticized steel housing, copper contacts. Straight bracket, 5/16" X 19/32" holes. Weight: .1 lbs.

UV and impact resistant acrylic lens. High-impact shroud. Visible up to 2 nautical miles. Pre-wired with 2.5 meters of marine cable. Rated for 8 - 28 volts DC. Black housing. Color: White, stern.

Features two 3/8" terminal studs. 
Tin plated copper construction. 
Rated for a maximum of 200 amps, 48 volts DC.

Dual power post cable connectors. For connection high-amperage conductors. 3/8" studs. Includes one red and one black insulator. Mounts with #10 screws. Rated for up to 48 volts. Weight: .5 lb.

Designed for outboard engine installation when factory cables need to be extended Includes one black and one red insulator 48 Volts DC - Accepts #10 (M5) Screws Weight: .2 lb

Dual power post cable connectors. For connection high-amperage conductors. 5/16" studs. Includes one red and one black insulator. Mounts with #10 screws. Rated for up to 48 volts.

Connects high amperage cables securely. Stud size: 1/4" x 3/4".

Boot For toggle switch protection. Allows any length handle to protrude. Seals tightly to handle. Suitable for all Cole Hersee toggle switches. Blister packaged.

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.