Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
S2K Commerce - Products Dropdown
Actions
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22
S2K Commerce - Order Entry
Actions
Fuse block
ST blade fuse block.
Positive distribution bus with #10-32 stud.
Can be used for 24-hour circuits.
Tin-plated copper buses and fuse clips.
Accepts ring or spade type terminals.
Accepts ATO and ATC fast acting blade fuses.
6 circuits, maximum 100A per block, maximum 30A per circuit.
Maximum voltage: 32V DC.
Fuses sold separately.
Item#:
BLS5033
Manufacturer:
Marinco, Ancor, Guest, BlueSea
Available:
In Stock
54.4700
Your Price:
43.57
EACH
Bus fuse block
Split bus fuse block with ground for use when a mix of switched and 24-hour circuits are desired in the same block.
Provides two isolated groups of six ATO®/ATC® circuits.
For use with either two isolated batteries or with a single battery providing a mix of 24 hour and switched circuits.
Screw terminals for securing wires accept ring terminals.
One-piece stainless flange nuts ensure safe and secure connections.
Clear insulating cover with label recesses and storage for two fuses, satisfies ABYC/USCG insulation requirements.
Easy to open, push button latch for easy access to fuses.
Tin-plated copper buses and fuse clips.
Fuses sold separately.
Maximum amperage: 30A per circuit; 100A total.
Maximum voltage: 32 volts DC.
Item#:
BLS5032
Manufacturer:
Marinco, Ancor, Guest, BlueSea
Available:
In Stock
107.0800
Your Price:
85.66
EACH
Cole Hersee M449
Terminal block with common hot feed connector. Molded plastic. Two holes for #10 countersink flathead screws, ten gangs. Size: 5-3/4" X 1.3" Mounting: Ten #8-32 screws, two 1/4-20 studs. Weight: .1 lbs.
Item#:
COHM449
Manufacturer:
Permatex / Rain-X
Available:
In Stock
29.5100
Your Price:
25.08
EACH
Cole Hersee M427
Terminal block with independent hot feed connector. Molded plastic with protective insulator barrier strips. Four 0.220" mounting holes, six gangs. Size: 4.33" X 1.3" Mounting: Twelve #8-32 screws. Weight: .1 lbs.
Item#:
COHM427
Manufacturer:
Permatex / Rain-X
Available:
In Stock
7.3800
Your Price:
6.27
EACH
Cole Hersee M428
Terminal block with independent hot feed connector. Molded plastic with protective insulator barrier strips. Four 0.220" mounting holes, eight gangs. Size: 5.46" X 1.3" Mounting: Sixteen #8-32 screws. Weight: .1 lbs.
Item#:
COHM428
Manufacturer:
Permatex / Rain-X
Available:
In Stock
18.2100
Your Price:
15.48
EACH
Cole Hersee M429
Terminal block with independent hot feed connector. Molded plastic with protective insulator barrier strips. Four 0.220" mounting holes, ten gangs. Size: 6.59" X 1.3" Mounting: Twenty #8-32 screws. Weight: .1 lbs.
Item#:
COHM429
Manufacturer:
Permatex / Rain-X
Available:
In Stock
22.2000
Your Price:
18.87
EACH
Fuse holder with buss bar
Six terminals. Takes standard 1/4" fuses. Dimensions: 2-7/16" X 4-1/2". Rated for 20 amps, 12 volts. Display packaged.
Item#:
SDG420526-1
Manufacturer:
Sea-Dog Corp
Available:
In Stock
24.6000
Your Price:
17.47
EACH
Fuse holder - spade terminal
Panel mounted AGC fuse holder provides over-current protection in electrical circuits.
Spade terminal.
Accepts standard 1/4" x 1-1/4" AGC style fuses sold separately.
Maximum 15A @ 12VDC.
Constructed of molded Bakelite with stamped brass contacts and a screw-on cap.Display packaged.
Item#:
SDG420503-1
Manufacturer:
Sea-Dog Corp
Available:
In Stock
4.9000
Your Price:
3.48
EACH
Class T fuse holder
225-400 amps Pro Installer Class-T fuse holder.
Class-T fusing provides the ultimate protection for high power circuits, and where extremely fast fuse blow characteristics are required.
Specifications:
- cable connection studs: 3/8"
- fuse mounting studs: 3/8"
- fuse type: Class-T (JLLN / TJN / A3T)
- 50V DC
- high temperature, fiber reinforced plastic base provides strength and chemical resistance;
clear polycarbonate cover
clear polycarbonate cover
- tinned CDA102 copper conductors
- stainless steel studs, washers and nuts for longevity in the marine environment.
Dimensions: 5.8" x 1.9" x 2.4".
Item#:
MRN778-T2S400
Manufacturer:
Marinco, Ancor, Guest, BlueSea
Available:
In Stock
102.5600
Your Price:
82.05
EACH
Inline Fuse Holder
ATO/ATC in-line fuse holder is designed to accept ATO/ATC fuses.
Maximum: 30A.
14 gauge 4" AWG wire lead.
Constructed of injection molded, fiberglass reinforced nylon.
Fuse sold separately.
Item#:
SDG445199-1
Manufacturer:
Sea-Dog Corp
Available:
In Stock
6.0500
Your Price:
4.30
EACH
4 gang terminal block used to secure and/or terminate two or more wires together.
Designed for use with tinned copper marine wire which shares the same expansion rate to prevent loosening wires and reducing electrolytic corrosion caused by pairing two disparate metals.
Constructed of molded Bakelite and stamped brass.
Installs with four #6 RH fasteners (not included).
Stamped brass/molded bakelite.
20 amp rating.
Display packed.
Item#:
SDG426624-1
Manufacturer:
Sea-Dog Corp
Available:
In Stock
8.3300
Your Price:
5.92
EACH
Designed for automotive-style spade terminal fuses.
12 gauge 12" AWG wire lead.
Maximum: 30 amps.
IP67 waterproof rating.
12 gauge 12" AWG wire lead.
Maximum: 30 amps.
IP67 waterproof rating.
Item#:
SDG445198-1
Manufacturer:
Sea-Dog Corp
Available:
In Stock
6.6500
Your Price:
4.72
EACH
Inline fuse holder
In-line fuse holder provides over-current protection in a convenient push together in-line holder.
Install by cutting the 11-1/2" wire lead and stripping both ends.
Constructed of injection molded nylon with a 14 gauge wire lead.
Accepts standard 1/4" x 1-1/4" AGC style fuse.
Maximum 20 amps @ 12VDC.
Includes a 20 amp AGC fuse.
Item#:
SDG420500
Manufacturer:
Sea-Dog Corp
Available:
In Stock
3.2800
Your Price:
2.33
EACH
Terminal connector
Passes high current cables through hulls, decks. Eliminates chafing and provides strain relief to cable. Will withstand water from heavy seas. Rated for 48 volts DC, 250 amps. Tin-plated copper alloy. Color: Red.
Item#:
BLS2202
Manufacturer:
Marinco, Ancor, Guest, BlueSea
Available:
In Stock
33.6800
Your Price:
26.95
EACH
Terminal connector
Passes high current cables through hulls, decks. Eliminates chafing and provides strain relief to cable. Will withstand water from heavy seas. Rated for 48 volts DC, 250 amps. Tin-plated copper alloy. Color: Black.
Item#:
BLS2201
Manufacturer:
Marinco, Ancor, Guest, BlueSea
Available:
In Stock
33.6800
Your Price:
26.95
EACH
For ATO/ATC style fuses.
LED indicator lights up when the fuse is blown.
IP67 waterproof rating.
LED indicator lights up when the fuse is blown.
IP67 waterproof rating.
Item#:
SDG445197-1
Manufacturer:
Sea-Dog Corp
Available:
In Stock
9.9800
Your Price:
7.09
EACH
Terminal block
6 gang terminal block used to secure and/or terminate two or more wires together.
Designed for use with tinned copper marine wire which shares the same expansion rate to prevent loosening wires and reducing electrolytic corrosion caused by pairing two disparate metals.
Constructed of molded Bakelite and stamped brass.
Installs with four #6 RH fasteners (not included).
Stamped brass/molded bakelite.
20 amp rating.
Display packed.
Item#:
SDG426626-1
Manufacturer:
Sea-Dog Corp
Available:
Out of Stock
9.5400
Your Price:
6.77
EACH
Call to Order
For ATM mini style fuses.
LED indicator lights up when fuse is blown.
IP67 waterproof rating.
Maximum amps: 30.
Has 14 gauge wire ends, 12" on each side.
LED indicator lights up when fuse is blown.
IP67 waterproof rating.
Maximum amps: 30.
Has 14 gauge wire ends, 12" on each side.
Item#:
SDG445097-1
Manufacturer:
Sea-Dog Corp
Available:
In Stock
8.9600
Your Price:
6.36
EACH
In-line dual fuse holder
Watertight PVC construction. Features a snap-together design. For use in wet or damp locations. Case is designed to hold a spare fuse. Includes two standard 1/4" X 1-1/4" glass fuses. 14 gauge wire. 15 amps. Display packaged.
Item#:
SDG420563-1
Manufacturer:
Sea-Dog Corp
Available:
In Stock
12.5800
Your Price:
8.93
EACH
ATM style inline fuse holder.
Designed for mini automotive-style spade terminal fuses.
12 gauge 12" AWG wire lead.
Maximum: 30 amps.
IP67 waterproof rating.
Designed for mini automotive-style spade terminal fuses.
12 gauge 12" AWG wire lead.
Maximum: 30 amps.
IP67 waterproof rating.
Item#:
SDG445098-1
Manufacturer:
Sea-Dog Corp
Available:
In Stock
6.7600
Your Price:
4.80
EACH
In-line dual fuse holder
Watertight PVC construction. Features a snap-together design. For use in wet or damp locations. Case is designed to hold a spare fuse. Includes two standard 1/4" X 1-1/4" glass fuses. 16 gauge wire. 10 amps. Display packaged.
Item#:
SDG420562-1
Manufacturer:
Sea-Dog Corp
Available:
In Stock
14.4400
Your Price:
10.25
EACH
In-line dual fuse holder
Watertight PVC construction. Features a snap-together design. For use in wet or damp locations. Case is designed to hold a spare fuse. Includes two standard 1/4" X 1-1/4" glass fuses. 10 gauge wire. 30 amps. Display packaged.
Item#:
SDG420565-1
Manufacturer:
Sea-Dog Corp
Available:
In Stock
15.9600
Your Price:
11.33
EACH
In-line fuse holder
Watertight PVC construction. Features a snap-together design. For use in wet or damp locations. Includes a standard 1/4" X 1-1/4" glass fuse. 16 gauge wire. 10 amps. Display packaged.
Item#:
SDG420552-1
Manufacturer:
Sea-Dog Corp
Available:
In Stock
11.4000
Your Price:
8.09
EACH
In-line dual fuse holder
Watertight PVC construction. Features a snap-together design. For use in wet or damp locations. Case is designed to hold a spare fuse. Includes two standard 1/4" X 1-1/4" glass fuses. 12 gauge wire. 20 amps. Display packaged.
Item#:
SDG420564-1
Manufacturer:
Sea-Dog Corp
Available:
In Stock
15.5600
Your Price:
11.05
EACH
ANL fuseholder
This innovative, through-panel mounting fuse holder offers the user easy visual inspection of fuse state, and easy/safe access to change fuses if blown.
Provides high-capacity fusing, fast response, high interrupt ratings, and is ideal for protecting today's demanding onboard power electronics technology including inverters and battery chargers.
Specifications:
- cable mounting studs: 3/8"
- fuse mounting studs: 5/16"
- double washers allow any ANL fuse brand to be fitted
- fuse type: ANL or ANN (fast blow)
- swinging fuse style allows changing fuse without removal of fastening nuts
- amperage: 35-500A
- 50 VDC (or determined by fuse fitted)
- tinned CDA260 high conductivity brass conductors.
Dimensions: 3.9" x 1.9" x 1.4".
Item#:
MRN778-ANLTP
Manufacturer:
Marinco, Ancor, Guest, BlueSea
Available:
In Stock
107.1300
Your Price:
85.70
EACH
In-line fuse holder
Watertight PVC construction. Features a snap-together design. For use in wet or damp locations. Includes a standard 1/4" X 1-1/4" glass fuse. 12 gauge wire. 20 amps. Display packaged.
Item#:
SDG420554-1
Manufacturer:
Sea-Dog Corp
Available:
In Stock
13.4900
Your Price:
9.58
EACH
In-line fuse holder
Watertight PVC construction. Features a snap-together design. For use in wet or damp locations. Includes a standard 1/4" X 1-1/4" glass fuse. 14 gauge wire. 15 amps. Display packaged.
Item#:
SDG420553-1
Manufacturer:
Sea-Dog Corp
Available:
In Stock
12.5800
Your Price:
8.93
EACH
Fuse holder with push-in cap
Panel mounted AGC fuse holder provides over-current protection in electrical circuits.
Side release solder terminal.
Accepts standard 1/4" x 1-1/4" AGC style fuse sold separately.
Maximum 10A @ 12VDC.
Constructed of molded Bakelite with stamped brass contacts and push-in cap.
Item#:
SDG420501-1
Manufacturer:
Sea-Dog Corp
Available:
In Stock
6.0500
Your Price:
4.30
EACH
Fuse holder with screw-on cap
Panel mounted AGC fuse holder provides over-current protection in electrical circuits.
Solder terminal.
Accepts standard 1/4" x 1-1/4" AGC style fuses sold separately.
Maximum 15A @ 12VDC.
Constructed of molded Bakelite with stamped brass contacts and a screw-on cap.
Display packaged.Item#:
SDG420502-1
Manufacturer:
Sea-Dog Corp
Available:
In Stock
4.1900
Your Price:
2.98
EACH
Inline fuse holder
In-line fuse holder provides over-current protection in a convenient push together in-line holder.
Install by cutting the 11-1/2" wire lead and stripping both ends.
Constructed of injection molded nylon with a 14 gauge wire lead.
Accepts standard 1/4" x 1-1/4" AGC style fuse.
Maximum 20 amps @ 12VDC.
Includes a 20 amp AGC fuse.
DP - display packed.
Item#:
SDG420500-1
Manufacturer:
Sea-Dog Corp
Available:
In Stock
5.5800
Your Price:
3.96
EACH
Fuse holder - round, with cap
Brass and Bakelite construction. Flush cap. Marked "FUSE". 10 amps, 12 volts. Display packaged.
Item#:
SDG420504-1
Manufacturer:
Sea-Dog Corp
Available:
Out of Stock
4.9000
Your Price:
3.48
EACH
Call to Order
Terminal block
10 gang terminal block used to secure and/or terminate two or more wires together.
Designed for use with tinned copper marine wire which shares the same expansion rate to prevent loosening wires and reducing electrolytic corrosion caused by pairing two disparate metals.
Constructed of molded Bakelite and stamped brass.
Installs with four #6 RH fasteners (not included).
Stamped brass/molded bakelite.
20 amp rating.
Display packed.
Item#:
SDG426620-1
Manufacturer:
Sea-Dog Corp
Available:
In Stock
13.4400
Your Price:
9.54
EACH
Snap-on terminal cover insulates all conductive parts, satisfying ABYC/USCG requirements.
Cover breakouts allow wires from sides or bottom.
Terminal screws compress fuse blades within blocks for low resistance connections.
Ignition protected.
Label recess accepts large format label.
Fuses sold separately.
Cover breakouts allow wires from sides or bottom.
Terminal screws compress fuse blades within blocks for low resistance connections.
Ignition protected.
Label recess accepts large format label.
Fuses sold separately.
Item#:
BLS5006100
Manufacturer:
Marinco, Ancor, Guest, BlueSea
Available:
In Stock
49.2500
Your Price:
39.40
EACH
In-line AGC/MDL fuse holder
Waterproof. Accepts 12 - 16 AWG wire. Maximum fuse amps: 20. Fuse sold separately.
Item#:
BLS5062
Manufacturer:
Marinco, Ancor, Guest, BlueSea
Available:
In Stock
24.0700
Your Price:
19.26
EACH
In-line AGC/MDL fuse holder
Waterproof. Accepts 12 - 16 AWG wire. Maximum fuse amps: 30. Fuse sold separately.
Item#:
BLS5061
Manufacturer:
Marinco, Ancor, Guest, BlueSea
Available:
Out of Stock
8.1100
Your Price:
6.49
EACH
Call to Order
In-line AGC/MDL fuse holder
Crimpable in-line AGC/MDL fuse holder.
Accepts 12 - 18 AWG wire.
30A maximum fuse amperage.
Fuse sold separately.
Item#:
BLS5060
Manufacturer:
Marinco, Ancor, Guest, BlueSea
Available:
In Stock
3.3400
Your Price:
2.67
EACH