Hot-dipped galvanized steel construction. 
Often used for anchor to chain connections. 
Size: 5/16". 
Rated for 3/4 ton. 
Display packaged. 

Brass plug for sacrificial zinc anodes. Internal threads: 7/16" NC. External threads: 1/2" NPT.

Nylon construction. Length: 8-1/16". Height: 1-3/4".

Display packed Investment cast 316 stainless Tube O.D.: 1" Base O.D.: 2-3/4" Weight: .49 lb

Trailer connector wire assembly - male. Four-pole trailer end connector 12 and 24 volt capacity. Kit includes all items needed for quick install. Length: 12". Weight: .1 lb.

Nylon construction. Length: 6-1/16". Height: 1-1/4".

Wire harness for a trailer. Color-coded wires, 4 pole. Frame clips included. Length: 25'. Weight: .1 lb.

A combination LED stop, turn and tail light. Has a license plate light. Solid-state construction, rated for 100,000 hours of use. Equipped with 14 LEDs. Fully-sealed submersible construction. Designed to directly replace 456-series incandescent lights. Includes mounting hardware. Dimensions: 7-15/16" X 2-7/8" X 2-7/8".

Nylon construction. Length: 4-1/4". Height: 1".

Aluminum construction. Length: 4". Two per pack.

Stainless steel. Bronze bushing. Dimensions: 197mm X 58mm. PN: A 306. Rated for 6 tons.

Mounts horizontal or vertical.
UV stabilized material.
Has invisible fasteners and easy-grip latches.
OD: 14" X 24".
ID: 10-1/2" X 20-3/8".

Injection molded nylon Size: 3/8" Diameter: 2" Color: White

Injection molded nylon Size: 9/32" Diameter: 1-1/4" Color: White

Brass plug for sacrificial zinc anodes. Internal threads: 3/8" NC. External threads: 3/8" NPT.

Stainless steel. Wire diameter: 1/4". Eye dimensions: 1-1/16" X 19/32". Overall length: 1-1/2". Two per package. Display packaged.

Flat head. Die cast aluminum. Length: 8".

Die cast aluminum Length: 6"

Die cast aluminum Length: 5"

Flat head. Die cast aluminum. Length: 10".

Baier hatch deck ring - aluminum.
May be bolted or welded to aluminum decks.
Clear opening: 8" round.

Brass plug for sacrificial zinc anodes. Internal threads: 1/2" NC. External threads: 3/4" NPT.

Polished cast brass Length: 2-1/2"

X-12 sacrificial aluminum shaft anode. For salt or brackish water applications. Shaft size: 2-3/4". Overall dimensions: 4-3/4" X 3-5/8".

Industry standard steel enclosure hatch.
Single T-handle bolt with a strongback.
Nitrile rubber gasket for a watertight seal.
Built of 3/8" steel for strength.
Painted primer gray.
Clear opening: 24".

X-10 sacrificial aluminum shaft anode. For salt or brackish water applications. Shaft size: 2-1/4". Overall dimensions: 4-1/4" X 3-3/4".

Sacrificial aluminum shaft anode. For salt or brackish water applications. Shaft size: 25mm. Overall dimensions: 2-1/8" X 2-1/8".

Bravo I Mercrusier aluminum anode kit. This kit will give your engine 100% protection. For use in salt and brackish water. Includes five anodes and fastening hardware. Weight: 2.75 lbs.

Stainless steel.
Diameter: 3/8".
Ring opening: 1-1/2".
Mounts with four 1/4" FH fasteners.

Cast aluminum. Length: 8".

Cast aluminum. Length: 6". Width: 1-1/4".

Display packed Tube O.D.: 7/8" Weight: .47 lb

A bright red LED side marker light. Water-resistant sealed housing and lens. Accepts industry standard two-prong plugs, 8-16 volts.

A bright amber LED side marker light. Water-resistant sealed housing and lens. Accepts industry standard two-prong plugs, 8-16 volts.

Clean-out style.
UMC bolt pattern.
2-1/2" coaming.
Steel bolts, bronze nuts.
Diameter: 23", 18" opening.