Clean design, with a non-skid diamond pattern. 1/2" closed height. Opens full 180°. Weather tight seal. One-hand operation. Mounts vertically or horizontally. Internal fasteners, nothing to snag lines. Size: 18" X 21". Color: White.

Stainless steel. Length: 3-7/16". Display packaged.

Baier center bolt assembly kit.
Includes:
Stainless steel center bolt
Neoprene washer
Stainless steel washer
Zinc-plated steel spring
Galvanized steel cross bar.

Alpha I and II aluminum anode kit. For boat parts manufactured in 1991 or later. Includes fastening hardware and instructions. All anodes are required for 100% corrosion protection.

Spare/replacement strongback hatch brace.
Baier strongbacks are built solid for years of service.
Cast from aluminum for lightweight strength.
For use with 15" X 24" oval T-handle style hatches.
NOT a replacement for hex centerbolt style hatches.

Will lift anchors up to 30 pounds. Simply slip over the anchor line. Tough nylon body reinforced with stainless steel.

Galvanized steel. Size: 3/4". Overall length: 8-7/8". Eye diameter: 1-7/8". Working load limit: 4-3/4 tons.

Heavy-duty steel construction. Size: 3/4". Painted blue.

Heavy-duty steel construction. Size: 7/8". Painted blue.

Replacement centerbolt and T-handle kit.
This is the new Baier T-Handle strongback hatch closure.
The kit updates the keyway style centerbolt that was on Baier T-handle strongback hatches in the past.
Features a stronger, simpler design and easy installation.
Includes eight pieces:
Stainless steel center bolt
Stainless steel turn bar and stainless cap weldment
Neoprene washer
Stainless steel washer
Flat screws
Zinc plated steel spring
Galvanized steel underside escape turnbar
Stainless steel hex set screw.

C-12 sacrificial zinc donut anode. For use in salt water. Mounts with included steel hardware. Shaft diameter: 2-1/2". Overall dimensions: 5" X 1-1/2". Weight: 4.59 lbs.

C-13 sacrificial zinc donut anode. For use in salt water. Mounts with included steel hardware. Shaft diameter: 3". Overall dimensions: 5" X 1-1/2". Weight: 4.11 lbs.

C-14 sacrificial zinc donut anode. For use in salt water. Mounts with included steel hardware. Shaft diameter: 3-1/2". Overall dimensions: 6-1/2" X 1-1/2". Weight: 7.8 lbs.

Injection-molded nylon construction. Rope drops into teeth for a positive lock. Easy to release. For 1/8" - 1/4" rope. Overall dimensions: 2-1/16" X 5/8". Color: Black. Display packaged.

Provides galvanic protection in salt water. Dimensions: 6" X 6" X 1/2". Distance between mounting holes: 2-7/8". Weight: 4.73 lbs.

Display packed Investment cast 316 stainless body with 304 stainless pin Size: 3/8" Length: 4-5/8" Weight: .73 lb

Display packed Tube O.D.: 7/8" Degrees: 125 Weight: .56 lb

Nylon construction.
Designed with a molded-in recess in the base.
Length: 8".
Height: 1-11/16".
One per package.
Display packaged.

Spare/replacement strongback hatch brace.
Baier strongbacks are built solid for years of service.
Cast from aluminum for lightweight strength.
For use with 18" round hex centerbolt style hatches.
NOT a replacement strongback for T-handle style hatches.

Cast iron, galvanized.
8" length.

Color: Black Base Width: 13/16" Base Length: 2-7/16" Pin Size: 3/16" Display packed Weight: .08 lb

Cast iron, galvanized.
12" length.

C-9 sacrificial aluminum "donut" anode. For use in fresh or brackish water. Mounts with included steel hardware. Shaft diameter: 2". Overall dimensions: 4" X 1-3/8".

Investment cast 316 stainless Tube O.D.: 1" Base: 1-7/8" x 3-1/4" Weight: .57 lb

Outside diameter: 3-13/16". Hole distance: 2-7/8" center to center. Zinc anode, for use in salt water.

Provides galvanic protection in salt water.
Space between holes: 6".
Dimensions: 12" X 6" X 1-1/4".

Baier replacement centerbolt washer.
For use with hex centerbox and T-handle hatches.
When properly installed, provides a watertight seal.
Neoprene washer.

Display packed Tube O.D.: 7/8" Weight: .34 lb

Black vinyl covered cast iron Similar in application to and function as the mushroom anchor, the river anchor adds flukes for better bottom penetration. Vinyl coating resists scuffing the deck Weight: 19.6 lbs

C-9A sacrificial zinc donut anode. For use in salt water. Mounts with included steel hardware. Shaft diameter: 2-1/4". Overall dimensions: 3-1/4" X 1-3/8". Weight: 2.56 lbs.

Keel cooler anode. Designed to protect freshwater cooling systems. Shields heat exchangers from galvanic corrosion. Dimensions: 3-1/4" X 3-7/8". Weight: .22 lb.

Keel cooler anode. Designed to protect freshwater cooling systems. Shields heat exchangers from galvanic corrosion. Dimensions: 6-3/4" X 1-1/4". Weight: .73 lb.

E-2 sacrificial zinc engine anode. For use in salt water. Mounts with included brass plug. Brass mounting thread size: 1/2". Zinc dimensions: 2" X 5/8". Weight: .17.