Galvanized steel pin and bolt. Bail size: 5/8". Working load limit: 6500 lb.

Natural draft direct-vent heater/fireplace. Stainless steel construction. Rated for high temperature use. Large ceramic glass flame-viewing window. Safe operation with airtight combustion chamber. Variable heat output, excellent thermal efficiency. Low fuel consumption. Includes blower fan to enhance air circulation. Heat output: 5500 - 7500 BTU. Flue size: 2.5". Dimensions: w 8.5" X h 14" X d 5.5".

Garelick pedestal seat knob. A replacement part for swivel seats. Black nylon construction. Weight: 1 lb.

Steel spring. For pliers: NN54, NN55.

Includes resistor unit and wiring diagram.

Designed for use in 24 volt systems.

Includes resistor unit and wiring diagram.

Designed for use in 32 volt systems.

Nylon construction. Designed with a molded-in recess in the base. Length: 4". Height: 7/8". Color: White.

Stainless steel. Thickness: 5/16". Length: 3-1/8". Eye diameter: 7/16". Snap opening: 3/8". Breaking strength: 1400 lb. Display packaged.

Features a rain drain for hard weather conditions. Color: White. Size: 5" X 12".

Screw-pin anchor / bow shackle. Galvanized steel. Thickness: 1/4". Shackle pin: 5/16". Display packaged.

Features a rain drain for hard weather conditions. Color: Black smoke. Size: 5" X 12".

Brownell motorboat stand.
Designed to be placed under the flat chines of powerboats.
Always use keel supports with boat stands.
Features:
18 degree top plate articulates in all directions
Threaded center rod allows for smooth adjustment
May be stacked for convenient storage.
Size range: 89" - 102".

NOTE: Due to the size of this product, shipping via UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Formed from strong, lightweight polypropylene.
Chemical and corrosion resistant.
Virtually unbreakable.
38" long, 11" blade.
Color: White.

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Standard tips. Compound action for powerful non-slip locking grip. Nickel-plated finish resists rust and corrosion. Red plastisol dip on release lever for improved comfort. Length: 6".

Oval sleeve. For eye splices. Diameter: 1/4". Weight: .08 lb.

Stainless steel. Length: 2-11/16". Shackle opening: 9/16". Eye: 1/2".

Brass construction.
Size: 1.
Length: 2-7/8".
Clip opening: 5/16".
Eye: 5/8".

Brass construction. Size: 0. Length: 2-1/8". Clip opening: 1/4". Eye: 7/16".

Galvanized steel pin and bolt. Bail size: 3/4". Working load limit: 9500 lb.

Injection molded nylon construction.

For hanging fenders from rails, stanchions, other locations.
Permanently attaches to the fender rope so it can't be lost.

Line size: 1/4" - 1/2"

Display packaged.

Flexible stainless steel wire rope. Thickness: 1/16". Sold by the foot.

Alloy steel pliers with spring action. Great for removing pin bones. Green cushioned grip.

Cast bronze Plain, standard regular plate. Includes a deck key. Diameter: 4".

Brass construction.
Size: 3.
Length: 3-13/16".
Clip opening: 9/16".
Eye: 3/4".

Brass construction. Size: 2. Length: 3-5/8". Clip opening: 1/2". Eye: 3/4".

Brass construction. Size: 1. Length: 3-3/16". Clip opening: 3/8". Eye: 3/4".

Stainless steel. Diameter: 3/16". Opening dimensions: 3/4" X 2".

Green cushion grip handle. 
Serrated jaw. 
1-11/16" jaw length. 
Length: 5-1/2".

Zinc-plated for corrosion resistance.
Perfect for keel rollers and bunk rollers.
Size: 1/2" X 12-3/4".
Fits 4" roller.

Oval sleeve. For eye splices. Diameter: 5/32". Weight: .02 lb.

Bolster bracket.
Heavy-duty hot dipped galvanized steel.
Designed to support bolster or bunk boards.
Slotted for vertical adjustments.
Length: 10".

Galvanized steel. Two pieces. Will accommodate any size of roller length. May be vertically adjusted for stabilizing boat on trailer. Slot accept 7/16" or 1/2" bolts.

Roller shaft. Keeps your rollers lubricated. Perfect for keel rollers and bunk rollers. Zinc plated steel gives corrosion resistance. Includes pal nuts. Size: 1/2" X 6-1/4". Weight: .4 lbs.

Perfect for keel rollers and bunk rollers.
Zinc plated steel for corrosion resistance.
Size: 1/2".
Four per package.

Replacement roller shaft cap nuts - 4 per pack.
Perfect for keel rollers and bunk rollers.
Zinc plated steel for corrosion resistance.
Size: 5/8".

1/2". Rated for 2 tons.