H.K. Porter pocket wire rope and cable cutters. Cuts wire rope, steel cable, and more. Drop-forged steel shear blades, steel handles. Length: 7-1/2". Weight: 1 lb.

Steel construction. For use with 4" snatch block.

Galvanized steel pin and bolt. Bail size: 7/8". Working load limit: 13000 lb.

Oval sleeve. For eye splices. Diameter: 3/8". Weight: .15 lb.

A very reliable waterproof design. Sealed capsule protects bulbs against corrosion. Meets DOT-108 lighing requirements. For trailers 80" or wider.

Keeps water, grit, and condensation from entering area. Wheels can be completely submerged. Prevents wheel bearing failure and eliminates suction in hub Size: 2.441".

Positive lock seat with slide/swivel operation. Low profile and provides 360° rotation. 6" smooth wobble free fore/aft travel. Internal Delrin cup for smooth, gall-free operation. Positive lock spider engages in 10° increments. Anodized aluminum slide plate has 5" x 12" hole pattern. Left or right hand operation available. All stainless hardware. For smooth stanchion pedestals.

Ancor wire stripper and crimping tool. Strips 26 to 10 AWG stranded wire. Automatic jaw-load self-adjusting wire stripper. Crimps 22-10 AWG insulated terminals.

Crescent long chain nose side cutting pliers. Long nose is great for reaching into tight places. Fine serrated jaws and keen cutters. Size: 6-5/8" Weight: .38 lb.

Stainless steel. Thickness: 3/8". Length: 3-15/16". Eye diameter: 9/16". Snap opening: 1/2". Breaking strength: 2000 lb. Display packaged.

Spare Tire Lock Fits over wheel studs (up to 9/16") to help deter theft. Removable plug: lets longer wheel studs protrude thru cap. Locking tab provides positive locking feature to help prevent lock from turning.

Split ring pliers. Designed with a spring. 6".

Laminated, high-carbon steel gears for long life. For horizontal pulling applications. Permanently lubricated bearings. Heavy-duty steel components with a zinc finish. Capacity: 600 lb.

Brownell flat topped sailboat stand.
Designed to be placed under the angled hulls of sailboats.
Always use keel supports with boat stands.
Features:
- 18 degree top plate articulates in all directions
- Threaded center rod allows for smooth adjustment
- May be stacked for convenient storage.
Size range: 24" - 36".

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Brownell flat topped sailboat stand.
Designed to be placed under the angled hulls of sailboats.
Always use keel supports with boat stands.
Features:
- 18 degree top plate articulates in all directions
- Threaded center rod allows for smooth adjustment
- May be stacked for convenient storage.
Size range: 64" - 79".

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Flat-topped sailboat stand.
Designed to be placed under the angled hulls of sailboats.
Always use keel supports with boat stands.
Size range: 79" - 96".

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Beckson Self Drain Opening Ports White Smoked Designed with drain molded on inside of the spigot. Promotes drainage without hassle of making angled cuts in hull for spigot or drains. Allows for thru-bolting that is impossible in windows where angled spigot extends below bolt holes. Self Drain Port 5 x 12 Inside hole size requires 5-1/2" x 12-1/2". Outside frame measures 7-3/4" x 14-5/8".

Made from first-rate American steel.
Dimensions: 54" X 41.5" X 48".
Rated for 20,000 lbs.

Intended to be used alongside a bow rack. 

Flexible stainless steel wire rope. Thickness: 1/8". Sold by the foot.

Steel construction. For use with 5" snatch block.

Galvanized steel. Length: 3-7/8". Opening: 11/16". Eye: 3/4". Breaking strength: 5000 lb. Display packaged.

Flush-cut hardened blades.
Comfortable plastic-dipped handles.
Cuts mild steel up to 1/4".
Cuts hardened steel up to .14", 3.8mm.

Connects on 12 points of contact for high torque turns. Designed for greater strength than other wrenches. High alloy steel with a black oxide finish. Size: 2-1/2".

Heavy-duty winch strap with safety hook. Built with polyester webbing and zinc plated steel. Length: 20'. Rated for a working load of 2700 pounds.

Stainless steel. Thickness: 5/16". Length: 3-1/4". Eye size: 7/16". Snap opening: 1/2". Breaking strength: 2300 lb.

Stainless steel. Thickness: 5/16". Length: 3-1/4". Opening: 1/2". Breaking strength: 2300 lb.

Stainless steel. Keeps water, grit, and condensation from entering area. Wheels can be completely submerged. Prevents wheel bearing failure and eliminates suction in hub Size: 2.328".

A bolt-on trailer tongue jack.
Designed to be used with boat and utility trailers.
Durable, rust-resistant zinc-plated steel.
Includes all mounting hardware to accommodate a 6" trailer frame.
1000 lb. capacity.

Cast bronze. Plain, standard regular plate. Includes a deck key. Diameter: 3".

Stainless steel. Thickness: 1/4". Length: 2-3/8". Opening: 7/16". Breaking strength: 1160 lb.

Stainless steel. Thickness: 1/4". Length: 2-3/8". Eye size: 1/4". Snap opening: 7/16". Breaking strength: 1160 lb.

Drop-forged carbon steel, hardened and tempered.
Precision jaws and sharp cutting edge.
Length: 6".

Tempress NaviStyle high-backed boat seat. Designed for ergonomic functionality. Provides lumbar support but flexible for lateral movement. Features "no-pinch" hinges and a high back for comfort. Color: Charcoal / Gray. Dimensions: 21-3/4" X 18" X 19-1/2". 

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.  

Tempress NaviStyle high-backed boat seat. Designed for ergonomic functionality. Provides lumbar support but flexible for lateral movement. Features "no-pinch" hinges and a high back for comfort. Color: Red / Gray. Dimensions: 21-3/4" X 18" X 19-1/2". 

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.  

Tempress NaviStyle high-backed boat seat. Designed for ergonomic functionality. Provides lumbar support but flexible for lateral movement. Features "no-pinch" hinges and a high back for comfort. Color: Tan / Sand. Dimensions: 21-3/4" X 18" X 19-1/2". 

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.