Includes: - Four 5" ribbed rollers - 7/8" and 1.15" bushings - Hog rings and washers. PVC color: Amber. Weight: 5.74 lbs.

Poly vinyl keel roller assembly. For center-guided keels. 5" long. 5/8" shaft. PVC color: Amber.

Poly vinyl keel roller assembly. 8" long. 5/8" shaft. PVC color: Amber.

Poly vinyl keel roller assembly. 10" long. 5/8" shaft. PVC color: Amber.

Boat trailer bunk slicks.
Fits standard bunk boards.
Slides on or off easily.
Dimensions: 3" X 16".
Color: Black.

License Plate Brackets Plastic Plastic high impact, non-corrosive polypropylene. Zinc plated metal for more demanding use.

Bronze construction.
Eye size: 1".
Length: 3-1/2".

Die cast brass chrome plated Dimensions: 1-3/4" x 3-1/8" Weight: .64 lb

Poly vinyl keel roller assembly. 12" long. 5/8" shaft. PVC color: Amber.

Brownell motorboat stand.
Designed to be placed under the flat chines of powerboats.
Always use keel supports with boat stands.
Features:
18 degree top plate articulates in all directions
Threaded center rod allows for smooth adjustment
May be stacked for convenient storage.
Size range: 67" - 84".

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Bronze construction.
Eye size: 1/2".
Length: 2-11/16".
Display packaged.

Bulkhead-mounted heater for 30 - 36 foot boats Uses safe, economical diesel fuel. Small, compact. Stainless steel with a decorative valve cover. Heating and optional hot water from one appliance. A 12V assist fan is standard, 24V or 32V optional. Dimensions: w 8.5" X h 19.75" X d 10.5". Heat output: 6500 - 16250 BTU. Flue size: 3". Weight: 22 lbs.

48" PVC pipe for guiding boats onto trailers. Pipe has 20" of internal metal tubing for added strength. All hardware is hot dipped galvanized.

48" PVC boat guides. Adapt to all tube and channel trailer frames. Heavy duty steel component parts. Hot dip galvanized for lasting protection. All hardware included. Heavy duty 48" x 2-3/8" PVC guide tubes. 16" of wider adjustment. Sold as a pair. Weight: 15.8 lbs.

Roller angle adjusts to angle of hull. Allows for 16" of adjustment (8" each side). Single piece adjusting clamp with U-bolts. Fits all channel and tube frames up to 5".

Bronze construction. Size: 2. Length: 3-3/4". Snap opening: 9/16". Eye diameter: 13/16". Display packaged.

Two-piece Bernz-O-Matic propane torch kit.
Includes brass torch with adjustable flame knob.
Comes with 14.1 oz. container of propane.
An easy, do-it-yourself soldering kit.

Stainless steel. Size: 1. Length: 2-7/8". Snap opening: 7/16". Eye: 5/8". Display packaged.

Adjustable offset brackets. Designed to mount on tongue for keel support. Complete with 4" rubber roller (for 2" wide tongue).

Stainless steel. Outer mounting plate is crimped in place. Includes adjustable finish nuts. Dimensions: 1/4" X 1-1/16". Display packed.

High strength carbon steel chain.
Galvanized and proof tested.
Good for towing, dragging, logging.
550 feet per drum.
Diameter: 5/16".
Working load limit: 3900 lbs.

HI-LIP design. Aluminum sheave. Hook is forged steel, galvanized with safety catch. Tapered roller bearings. Cast-in labyrinth shields. Sheave diameter: 4". Overall block height: 14-1/4". Capacity: 2,000 lb.

A very compact low-pressure regulator.
Comes fully assembled and leak-tested.
Consists of a solid brass male POL cylinder fitting and street tee; a low-profile, watertight, stainless steel gauge; and a UL listed die-cast zinc body, with a 3/8" FPT outlet.
Designed to be tank-mounted.
Single port, single stage.
Gauge is rated for up to 300 PSI.
Meets ABYC marine standards (LPG System Leak Test 1).
Dimensions: 2.13" X 4.5" X 1.63".

Stainless steel spacer for hammerlock. Required for fixture use. Size: 1/2". Weight: .05 lb.

Floor mounted heater for 36 - 40 foot boats. Uses safe, economical diesel fuel. Heating, cooking, and optional hot water from one appliance. A 12V assist fan is standard, 24V or 32V optional. Cast iron lid provides a fine cooking surface. Dimensions: w 10.75" X h 18" X d 17". Heat output: 6500 - 16250 BTU. Flue size: 4". Net Weight: 25 lbs - Shipping Weight: 35 lbs

Includes two halves for securing to rudder, and hardware. For use in fresh or brackish water. Diameter: 1-7/8". Thickness of one half: 1/4".

Includes two halves for securing to rudder, and hardware.
For use in fresh or brackish water.
Diameter: 5".
Thickness of one half: 5/8".

Includes two halves for securing to rudder, and hardware. For use in fresh or brackish water. Diameter: 3-3/4". Thickness of one half: 1/2".

Includes two halves for securing to rudder, and hardware. For use in fresh or brackish water. Diameter: 2-13/16". Thickness of one half: 1/2".

Zinc plated steel. Includes 2 pal nuts. Dimensions: 1/2" X 4-1/4".

Zinc plated steel. Includes 2 pal nuts. Dimensions: 1/2" X 5-1/4".

Zinc plated steel. Includes 2 pal nuts. Dimensions: 1/2" X 6-1/4".

Zinc plated steel. Includes 2 pal nuts. Dimensions: 5/8" X 5-1/4".

Zinc plated steel. Includes 2 pal nuts. Dimensions: 5/8" X 6-1/4".