Stainless steel. Size: 3. Length: 4-5/8". Snap opening: 1/2". Eye: 7/8". Display packaged.

Megapro pocket-sized electronics screwdriver.
Compact and designed for electronics and computer parts.
Comes with special small Phillips, square, and flat bits.

Used for mounting brackets to trailer frame. Galvanized steel to help prevent rusting. Rod width: 1/2", 13 threads per inch. Between each leg: 2-1/8". Leg length: 4"

Used for mounting brackets to trailer frame. Galvanized steel to help prevent rusting. Rod width: 1/2", 13 threads per inch. Between each leg: 3-1/8". Leg length: 3".

Used for mounting brackets to trailer frame. Galvanized steel to help prevent rusting. Rod width: 1/2", 13 threads per inch. Between each leg: 3-1/8". Leg length: 4".

Screw-out deck plate with an internal collar. 
ABS construction. 
Molded with a collar on the bottom. 
May be attached to hold deck plate bags. 
Hull installation requires silicone sealant. 
Overall diameter: 5-3/4". 
Opening: 4-7/16". 
Color: Black. 
Display packaged.

2" wide nylon webbing. Heavy-duty zinc plated steel snap hook. One end is plain end for threading onto a winch. Rated for 4000 lbs.

Bends so you can tighten screws from any angle.
Reaches awkwardly-placed screw heads, up to 90°.
Perfect for tightening hose clamps.
Size: 9/32" (7mm).

Used for mounting brackets to trailer frame. Galvanized steel to help prevent rusting. Rod width: 1/2", 13 threads per inch. Between each leg: 3-1/16". Leg length: 3-13/16".

Used for mounting brackets to trailer frame. Galvanized steel to help prevent rusting. Rod width: 1/2", 13 threads per inch. Between each leg: 2-1/16". Leg length: 4-13/16".

Used for mounting brackets to trailer frame. Galvanized steel to help prevent rusting. Rod width: 7/16", 14 threads per inch. Between each leg: 2-1/16". Leg length: 2-5/16".

Used for mounting brackets to trailer frame. Galvanized steel to help prevent rusting. Rod width: 7/16". Between each leg: 2-1/16". Leg length: 4-5/16".

Bronze construction. Size: 3. Length: 4-3/8". Snap opening: 9/16". Eye diameter: 3/4". Display packaged.

Stainless steel. Size: 0. Length: 2-1/16". Snap opening: 1/4". Eye: 7/16". Display packaged.

Lever type load binder. Painted red. For 5/16" - 3/8" chain. Rated for 5,400 lb. Allows for quicker application of load than a ratchet.

Wood scraper All-metal construction. Four edges on a 1-1/2" blade. Features an aggressive camber ground blade. Weight: .44 lb.

Features a patented pullout bit cartridge
Makes it easy to find, change and store bits.
Handle is made from engineered nylon/ABS resin.
Shaft opening serves as a 1/4" hex driver.
Alloy steel shaft.
Palm saver cap keeps you from getting blisters.
Comes with 15 bit tips:
- Point types: double-ended, Phillips, square, flat, Torx.
- Tip types: Phillips, square awl, valve stem, slotted, 5/16" miniature nut driver.

Wood scraper. All-metal construction. Four edges on a 2-1/2" blade. Features an aggressive camber ground blade. Weight: .7 lb.

Boat stand top. For replacement or changing existing boat stands. Solid ACME threaded rod. Fully adjustable under load. Durable steel construction. Length: 27". Weight: 18 lbs. NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.  Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Forged stainless steel.
Point is set with epoxy into wood handle.
Length: 54".

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.  Please contact Seattle Marine at 1-800-426-2783 for shipping options. 

Designed for sharpening saws or finishing metal. Single cut on sides and edges. Two square edges. Length: 10".

Bulwark chock with horns. Cast aluminum. Ideal to set inside of bulwark at bow and stern. Opening size: 2-5/8" X 5".

All-weather bunk board carpet. 1" X 12' Replaces worn/frayed bunks on trailer. Marine grade, gray, will not mildew.

Stainless steel.
Makes mooring buoy line attachment an easy process.
Kit includes snap hook, keeper plate, fasteners.

Display packed Stamped 304 stainless The ultimate deck plate key will fit all Sea-Dog fuel fills as well as most others on the market Also included on the key is a shackle key, bottle opener and a straight blade screwdriver, plus 5/16" hex head and 7/16" hex head wrench Weight: .13

Poly vinyl bow roller assembly. With end bells. 4" long. 1/2" shaft. PVC color: Amber.

Poly vinyl bow roller assembly. With end bells. 3" long. 1/2" shaft. PVC color: Amber.

Includes: - Four 5" ribbed rollers - 7/8" and 1.15" bushings - Hog rings and washers. PVC color: Amber. Weight: 5.74 lbs.

Poly vinyl keel roller assembly. For center-guided keels. 5" long. 5/8" shaft. PVC color: Amber.

Poly vinyl keel roller assembly. 8" long. 5/8" shaft. PVC color: Amber.

Poly vinyl keel roller assembly. 10" long. 5/8" shaft. PVC color: Amber.

Boat trailer bunk slicks.
Fits standard bunk boards.
Slides on or off easily.
Dimensions: 3" X 16".
Color: Black.

License Plate Brackets Plastic Plastic high impact, non-corrosive polypropylene. Zinc plated metal for more demanding use.

Bronze construction.
Eye size: 1".
Length: 3-1/2".