Acrylic plastic beads. Round, 8mm. Glow-in-the-dark. 100 per pack. Weight: .25 lb.

Color: Zucchini.

Aluminum alloy construction. Oval shape is designed to be easy to crimp. Resists corrosion in salt water. Provides a permanent crimp while maintaining line strength. Fits 100 - 60 lb. test Jinkai line. Diameter: 1.00 - 0.74 mm. Size: "J". 50 sleeves per package.

Trolling pig #4, shear.
Used to float and track the outside trolling wires.
Feature wood top and bottom with brass fasteners.
Made in USA.

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.  Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Green trolling snubber.
Stainless steel #9 snap on one end.
Ball bearing swivel on the other.
18" long.
Sold by the each or bundle of 12.

Mechanically-operated lever-action warning bell. Cast iron and polished brass construction. Traditionally used for tuna trolling. Size: 6".

These narrow-profile lures work well when trying to match smaller bait sizes, such as herring or candlefish.
The slender profile has a natural look when trolling, triggering more aggressive strikes.
Proven effective on all salmonoid species.
Length: 4-1/4".

Color code: NG140R.

Five per pack.

These narrow-profile lures work well when trying to match smaller bait sizes, such as herring or candlefish.
The slender profile has a natural look when trolling, triggering more aggressive strikes.
Proven effective on all salmonoid species.
Length: 4-1/4".

Color code: NG142R.

Five per pack.

Color code: OAX34R. Length: 4-1/4". 5 per pack.

Color code: OC39R. Length: 4-1/4". 5 per pack.

Green trolling snubber.
Stainless steel #7 snap on one end.
Ball bearing swivel on the other.
18" long.
Sold by the each or bundle of 12.

Ultragreen super soft monofilament Provides superior abrasion resistance 1600 yards of 100 pound test.

Measures 14" and includes a stainless steel snap on one end and a ball bearing swivel on the other. 12 per bundle

For use with vinyl octopus lures. Color: Glow-in-the-dark green with glow-in-the-dark head. 10 per package.

Adjusts for elevation and angle. Great for fishing from boats or piers. Cradle configuration secures rod. Permits one motion hook setting and rod removal. Large swivel locking ring. Side mount included.

Length: 4 feet.

A precision-cut piece of aluminum, used in specific installations of hauler systems.
Dimensions: 3" X 7/8".

Small mesh slows crabs' access to bait.
Heavy-duty rubber band door.
Vinyl coated steel wire.

Used on vertical, flat surfaces May be used with a rail mount adapter.

Stainless steel construction. To use, slide the grippers over a fish's jaw. The fish's weight will tighten the grip. Built-in calibrated scale measures fish up to 30 lb. Includes an adjustable wrist strap for safety.

It's razor clam season! When the weather starts getting colder, it's time to head to the coast!

The Pacific razor clam is one of the most popular types of shellfish harvested in Washington state. They're super meaty with a narrow, slightly curved shell -- much like the handle or blade of an old-style straight razor. (The edge of the clamshell can be "razor-sharp" too, so watch your fingers when you're digging!)

The folks that live in the Pacific Northwest are lucky to have one of the best razor clam locations in the world. Digging for these delicious clams is a fun activity suitable for all members of your family, from kids to grandparents. Depending on where you go, you might see as many as a thousand other razor clam seekers sharing the beach. But don't worry: there are plenty of razor clams for everyone.

So how do you prepare to go razor clam digging?

You definitely need the right gear before you go.
The basic setup for a day of razor clamming includes:
 1) The correct license
 2) A clam shovel or clam gun
 3) A clam net bag to hold your catch

First, make sure you have the proper Washington state license. You will need a razor clam license to harvest clams legally (or one of the shellfish/seaweed combo licenses, there are several different kinds). You can order one online, by phone, or at an authorized license dealer. Once you have it, you'll need to keep that license in your possession while you're digging and after you've caught your limit (in case a ranger needs to inspect it).

Next, you'll need a tool to actually dig down and pull those elusive clams out of the sand. The Danielson clam gun is one option of that necessary gear (the other option is a clam shovel).

This clam gun has been engineered specifically for removing razor clams from sandy ocean beaches. Its ultra-light corrosion-resistant aluminum construction make it easy to transport, while staying strong enough to burrow into any shore in pursuit of shellfish.

Measuring 31" in length, it features a 5" x 15" barrel with a 1-3/16" x 10" T-handle with a polycarbonate lining to pad your hands a little bit. (Some people consider the aluminum Danielson razor clam gun to be the Cadillac of clam guns.)

Now, like the old-time clam expert says: "Ya can't dig ya clams at high tide." After you've found your spot at LOW tide, go searching along the shore for dimples in the sand.

So how do you use a clam gun?

Set your clam gun barrel off-center with more sand on the side facing the water. Push down while twisting back and forth, rocking in a circular manner. Once the barrel is as deep as you can go, block the air vent on the underside of the handle with your finger, then pull straight up. When you remove your finger from the vent hole, a core of sand will drop out onto the beach -- and this is where your razor clam will be, if you've got the clammer's luck.

If you want to know more about clam gun usage, try watching a video or two before you go.

Braided-on rope harness and harness float.
Rugged polypro netting with wire grid bottom.
Vinyl coated steel rings, 32" upper, 15" lower.
16" deep.

Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.

Black plastic door hooks. Used on crab or shrimp traps. Size: 2".

Crabs easily scale sloped sides, acts as inescapable pen.
Polypro net, sides have 5 strong metal supports.
Comes with harness and float.
Vinyl coated steel rings.
18" upper ring, 34" lower ring.
16" deep.

Not intended for commercial use.
Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Cone shaped entrances funnel crayfish into the trap.
Designed to make escape difficult.
Vinyl-coated diamond grid steel wire construction.
Measures 9" in diameter at trap center, 16-1/2" long.

Not intended for commercial use.
Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Corrosion-resistant plated steel wire.
Pyramid shaped trap.
Strung with tough poly take-up cords.
Size: 14" X 14".

Not intended for commercial use.
Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.

For weighing down crab trap doors. Snaps into place. Size: 12 oz.

Red and white crab float.
Buoyancy: 6 lb., 8 oz.
Dimensions: 5" X 11".

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Fits the MT510 Multi Tote bins.
Allows the bins to be stacked when full.
Dimensions: 39.5" X 18.75" X 2".

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.  Please contact Seattle Marine at 1-800-426-2783 for shipping options. 

Reusable bulk container. Natural white. Outside dimensions: 39" X 18.5" X 11.5". Capacity: 4 cubic feet. Includes a 39.5" X 18.75" X 2" lid. Stackable. NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.  Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Large ice scoop. Cast aluminum. Dimensions: 12" X 5". Weight: 1.18 lbs.

Reusable bulk container. Natural white. Outside dimensions: 39" X 18.5" X 11.5". Capacity: 4 cubic feet. Stackable. Does not include a lid. NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.  Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Solid-wall bulk bin.
Seamless construction for a watertight interior.
FDA-approved materials, appropriate for food processing.
Four-way forklift / two-way pallet jack entry makes this tote easy to move.

Color: "Natural" White.

This unit does NOT include a lid.

Outside Dimensions: 47.9" X 43.8" X 29.2".
Inside Dimensions: 45.6" X 42" X 23.9".

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Resuable bulk container with lid. Designed for forklift and pallet jack. Color: Natural plastic. Dimensions: 41-1/4" X 27-3/4" X 30-1/4". Capacity: 13 cubic feet.

Rugged polyethylene seamless construction. USDA / FDA approved. Custom colors available.

White polymer construction. Bacteria, chemical, and corrosion resistant. Easy to clean and sanitize. FDA / USDA approved material. 2 quart capacity. Dimensions: 6-1/8" X 14-3/4".