2" camber ground blade. Double edged. For aggressive scraping action. 1 per card.

C.S. Osborne yacht scraper.
No. 272.
Triangular blade.
Hardwood handle.
Size: 9-1/2" long, 2-3/4" blade.

Rounded on one side, flat on opposite. Both sides are double cut. Length: 10".

Flexible putty knife - 2". Tempered spring steel construction. Brass cutlery rivets and eyelets.

Flexible putty knife / wall scraper - 3". Tempered spring steel construction. Brass cutlery rivets and eyelets.

Stiff putty knife / wall scraper - 3". Tempered spring steel construction. Brass cutlery rivets and eyelets.

Wallpaper stripper - 4". Twists to unlock and change blades. Aluminum construction. 12 inches overall length. Weight: .78 lb.

Cutter wheels and reamer are hardened alloy steel. 
Tool cuts tubing, copper, brass, and thin wall conduit. 
1/8" to 1-1/8" capacity. 
Has a reamer blade to clean off any sharp edges.

Plastic putty knife / wall scraper. 3" CELCON scraper. Solvent proof. 25 per bucket

Plastic putty knives. 2" CELCON knives. Solvent proof. 25 per bucket.

Twelve screwdrivers. 
Black oxide non-slip tips. 
Slotted and Phillips. 
Color: Red and black. 

1/4" quick-change, ANSI-compatible chuck.
7 double end bits that store in the handle.
Accepts all 1/4" hex-shank power groove accessories.
Includes Phillips, Robertson, Torx and Slot bits.

High visibility orange, high impact case. Rubber cushion grip. Easy-to-read yellow steel blade. Top-positioned toggle lock. Blade width: 3/4". Length: 16 feet.

30 piece 3/8" drive set.
Standard and deep SAE / metric mechanics tool set.
Great set of sockets for your boat, car, or shop.
Packaged in handsome high-impact plastic case.

C.S. Osborne flexible packing hooks, No. 1204-3.
Strong construction for hard work situations.
Two spiral steel shafts work together to provide strength.
Corkscrew tip is permanently attached.
Size: 15" long.
Shaft diameter: 3/8".
Corkscrew size: 3/8".

C.S. Osborne flexible packing hooks.
No. 1204-4.
Strong construction for hard work situations.
Two spiral steel shafts work together to provide strength.
Corkscrew tip is permanently attached.
Size: 18" long.
Shaft diameter: 3/8".

C.S. Osborne flexible packing hook, No. 1204-1.
Strong construction for hard work situations.
Two spiral steel shafts work together to provide strength.
Corkscrew tip is permanently attached.
Size: 7-1/4" long.
Shaft diameter: 3/16".
Corkscrew size: 1/4".

C.S. Osborne flexible packing hooks, No. 1204-2.
Strong construction for hard work situations.
Two spiral steel shafts work together to provide strength.
Corkscrew tip is permanently attached.
Size: 10-5/8" long.
Shaft diameter: 1/4".
Corkscrew size: 5/16".

Alloy steel, chrome finish.
Jaw capacity: 15/16".
Length: 6".

Stainless/zinc plated steel. Will install 1" brass or aluminum drain tubes. A handy item for any toolbox. Length: 4".

Stainless steel blades.
3/8" of serration for easier cutting.
Scissors measure 6" overall.
A great snip!

Blade file. A special flat file, made to sharpen blades to a fine, sharp, smooth edge. Weight: .15 lb.

Three position crimping tool with side cutter.
Heat treated steel components.
Three separate crimping positions for precise crimping of Jinkai line: 50 - 300 lb. test.
Length 10"; blue handle.

Bright orange case - easy to find on the job.
Case designed to fit comfortably in hand.
2 rivet end hook with reinforcing strip.
Clear coat blade protection for more durable markings.
Slide lock button allows for easy control of tape blade.
Removable belt clip.
Easy to read yellow-clad blade graphics.
Blade style: A5.

Megapro ratcheting 13-in-1 multi-bit screwdriver.
Equipped with a ZAD 8 zinc alloy ratchet that delivers over 225 inch-pounds of torque strength.
Precision 28-tooth ratchet design makes your job easier.
Features a patented pullout bit cartridge.
Makes it easy to find, change and store bits.
Handle is made from engineered nylon/ABS resin.
Shaft opening serves as a 1/4" hex driver.
Alloy steel shaft.

Megapro 15-in-1 multi-bit screwdriver.
The original 15-in-1 industrial-grade driver.
Features:
- Easy-guide collar
- Retractable bit cartridge
- Palm saver cap
- Phillips, square, flat, Torx (star) bits.
Dimensions: 8-1/2" closed, 11-1/2" open, 1-3/8" diameter.

Swivel tips minimize marring on softer materials. Compound action for powerful non-slip locking grip. Nickel-plated finish resists rust and corrosion. Precisely machined ferrule for fine jaw adjustment. Overall length: 11".

Handheld tube cutter tool. For cutting polyethylene PEX tubing. Simple squeeze action for quick cuts during jobs. Weight: 1 lb.

Alloy steel with black phosphate finish.
Plain grip.
Length: 8".

For internal or external retaining rings. Tips are precision formed and hardened. For 1/4" - 3-1/2" rings. Length: 6".

Black phosphate finish.
Length: 12".
Maximum jaw width: 1-1/2".