Wood scraper blade - 2-1/2", four-edge. For use with four-edge wood scrapers. Camber ground blade for aggressive scraping action. Two per package. Weight: .18 lb.

MAP-Pro hand torch cylinder.
Ideal for medium to heavy soldering and brazing.
Flame temperature in air is 3,600 degrees F.
Size: 14.1 oz. 12 per case

Ideal for camping and other tasks.
Flame temperature in air is 3,450 degrees.
Size: 16.4 oz.

2" camber ground blade. Double edged. For aggressive scraping action. 1 per card.

C.S. Osborne yacht scraper.
No. 272.
Triangular blade.
Hardwood handle.
Size: 9-1/2" long, 2-3/4" blade.

Rounded on one side, flat on opposite. Both sides are double cut. Length: 10".

Flexible putty knife - 2". Tempered spring steel construction. Brass cutlery rivets and eyelets.

Flexible putty knife / wall scraper - 3". Tempered spring steel construction. Brass cutlery rivets and eyelets.

Stiff putty knife / wall scraper - 3". Tempered spring steel construction. Brass cutlery rivets and eyelets.

Wallpaper stripper - 4". Twists to unlock and change blades. Aluminum construction. 12 inches overall length. Weight: .78 lb.

Great for many small projects: soldering, melting, etc.
A compact design for portability and use in tight spots.
Easy trigger-start ignition and fully adjustable flame knob.
Comfort grip handle for easy control.
Runs on propane fuel only.
Kit includes torch head and 14.1 propane cylinder.

Cutter wheels and reamer are hardened alloy steel. 
Tool cuts tubing, copper, brass, and thin wall conduit. 
1/8" to 1-1/8" capacity. 
Has a reamer blade to clean off any sharp edges.

Plastic putty knife / wall scraper. 3" CELCON scraper. Solvent proof. 25 per bucket

Plastic putty knives. 2" CELCON knives. Solvent proof. 25 per bucket.

Instantly adjusts for 10"/250mm to 12"/300mm blades. Adjusts 90° for vertical or horizontal cuts. Comes with 10" blade.

Twelve screwdrivers. 
Black oxide non-slip tips. 
Slotted and Phillips. 
Color: Red and black. 

1/4" quick-change, ANSI-compatible chuck.
7 double end bits that store in the handle.
Accepts all 1/4" hex-shank power groove accessories.
Includes Phillips, Robertson, Torx and Slot bits.

High visibility orange, high impact case. Rubber cushion grip. Easy-to-read yellow steel blade. Top-positioned toggle lock. Blade width: 3/4". Length: 16 feet.

Half round file, bastard cut. Double cut. Length: 4".

30 piece 3/8" drive set.
Standard and deep SAE / metric mechanics tool set.
Great set of sockets for your boat, car, or shop.
Packaged in handsome high-impact plastic case.

C.S. Osborne flexible packing hooks, No. 1204-3.
Strong construction for hard work situations.
Two spiral steel shafts work together to provide strength.
Corkscrew tip is permanently attached.
Size: 15" long.
Shaft diameter: 3/8".
Corkscrew size: 3/8".

C.S. Osborne flexible packing hooks.
No. 1204-4.
Strong construction for hard work situations.
Two spiral steel shafts work together to provide strength.
Corkscrew tip is permanently attached.
Size: 18" long.
Shaft diameter: 3/8".

C.S. Osborne flexible packing hook, No. 1204-1.
Strong construction for hard work situations.
Two spiral steel shafts work together to provide strength.
Corkscrew tip is permanently attached.
Size: 7-1/4" long.
Shaft diameter: 3/16".
Corkscrew size: 1/4".

C.S. Osborne flexible packing hooks, No. 1204-2.
Strong construction for hard work situations.
Two spiral steel shafts work together to provide strength.
Corkscrew tip is permanently attached.
Size: 10-5/8" long.
Shaft diameter: 1/4".
Corkscrew size: 5/16".

Alloy steel, chrome finish.
Jaw capacity: 15/16".
Length: 6".

Stainless/zinc plated steel. Will install 1" brass or aluminum drain tubes. A handy item for any toolbox. Length: 4".

Carpenter's pencils - three pack. Flat, rugged redwood pencils. Used for marking lumber, masonry, blueprints. Weight: .15 lb.

Lifts up paint can lids on gallon and quart containers. Also works well as a standard bottle opener.

Hobby knife blades. #11. 5 per card. Weight: .1 lb.

Designed for sharpening saws or finishing metal. Single cut on sides and edges. Two square edges. Length: 6".

High quality stainless steel blade with Sure Grip cushion 4" with Flexible blade

Instant on/off trigger ignition.
Large, optimized swirl flame.
Adjustable flame control allows for a more precise flame.
Run lock button keeps torch lit for finger-free use.
Pressure regulated for consistent performance.
Cast aluminum construction provides added durability.
Includes a 14.1 oz. MAP-Pro-filled cylinder.

Precisely machined ferrule for fine jaw adjustment. Has an integral wire cutter for increased versatility. Compound action for powerful non-slip locking grip. Curved jaw. Length: 7".

Used to file circular openings or concave surfaces. Single cut. Tapered slightly toward point. Length: 8".

Trigger-Start torch head - TS4000.
One-click instant-on trigger igniter for easy lighting.
May be locked on for continuous use.
Emits a hot, efficient flame.
Uses propane or propylene fuel (MAP-Pro).