Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
S2K Commerce - Products Dropdown
Actions
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22
S2K Commerce - Order Entry
Actions
Buoy Beacon light installation tool
A custom-built installation tool for the Buoy Beacon light.
Strongly recommended for installation, but not required.
Using this tool will help to assure a proper seal between the buoy's polymer and the Buoy Beacon light assembly.
Marine-grade aluminum construction.
Item#:
BPIBBTOOL
Available:
Out of Stock
New Item
28.7500
Your Price:
19.99
EACH
Call to Order
Buoy Beacon light
Normal buoy lights failing -- breaking, getting tangled in nets, banging around on deck, being a pain to store...
The Buoy Beacon was created to solve these problems.
It's simple, reliable, and built to last.
If you're looking to make your fishing operation safer and more efficient, these lights are for you.
Equipped with a photosensitive sensor, the Buoy Beacon automatically turns on at night and shuts off during the day.
Installs quickly in nearly any polymer buoy.
Uses two standard D-cell batteries, and the electronics are fully sealed and isolated from the air and water.
Built super-strong from marine-grade aluminum.
Each unit consists of three parts: light housing, screw-on battery plug and locking nut.
Installs by cutting a hole in a buoy, threading the light unit into the hole, and tightening into place. (Buoy Beacon installation tool suggested, but not required.)
Item#:
BPIBBLIGHT
Available:
Out of Stock
New Item
240.9900
Your Price:
224.99
EACH
Call to Order
2" tall aluminum pole to light adapter.
Acme thread one end, other end has 1/4" hole
to accept lag bolt for attaching to light pole.
For use with strobe and steady-on marker lights:
- PISPACLITE, PISPACLIT-LED
- PISPACLITE-ST, PISPACLTSTLED
- ITMDYX-285, ITMDYX-285A.
Item#:
SMFPOLEADAPT2
Available:
In Stock
36.4200
Your Price:
25.86
EACH
Steady-on LED marker light
Steady-on light.
Equipped with a high-output LED bulb for a long life of use.
Typically used as a gillnet marker or with halibut poles.
May be attached with its screw-on base.
Uses two D-cell batteries.
Waterproof.
Light is activated by photo sensor.
6" tall.
Not USCG approved.
Equipped with a high-output LED bulb for a long life of use.
Typically used as a gillnet marker or with halibut poles.
May be attached with its screw-on base.
Uses two D-cell batteries.
Waterproof.
Light is activated by photo sensor.
6" tall.
Not USCG approved.
Item#:
PISPACLTSTLED
Available:
In Stock
41.5500
Your Price:
35.32
EACH
blinking LED marker light
Equipped with a high-output LED bulb for a long life of use.
Typically used as a gillnet marker or with halibut poles.
May be attached with its screw-on base.
Uses two D-cell batteries.
Waterproof, fully sealed.
Light is activated by photo sensor.
6" tall.
Not USCG approved.
Typically used as a gillnet marker or with halibut poles.
May be attached with its screw-on base.
Uses two D-cell batteries.
Waterproof, fully sealed.
Light is activated by photo sensor.
6" tall.
Not USCG approved.
Item#:
PISPACLIT-LED
Available:
In Stock
41.5500
Your Price:
35.32
EACH
Steady-on marker light
Steady-on light.
Typically used as a gillnet marker or with halibut poles.
May be attached with its screw-on base.
Uses two D-cell batteries.
Waterproof.
Light is activated by photo sensor.
6" tall.
Not USCG approved.
Replacement bulbs available: PISPACBULB-1.
Typically used as a gillnet marker or with halibut poles.
May be attached with its screw-on base.
Uses two D-cell batteries.
Waterproof.
Light is activated by photo sensor.
6" tall.
Not USCG approved.
Replacement bulbs available: PISPACBULB-1.
Item#:
PISPACLITE-ST
Available:
In Stock
16.7100
Your Price:
14.20
EACH
Blinking marker light
Typically used as a gillnet marker or with halibut poles.
May be attached with its screw-on base.
Uses two D-cell batteries.
Waterproof, fully sealed.
Light is activated by photo sensor.
6" tall.
Not USCG approved.
Replacement bulbs available: PISPACBULB-1.
May be attached with its screw-on base.
Uses two D-cell batteries.
Waterproof, fully sealed.
Light is activated by photo sensor.
6" tall.
Not USCG approved.
Replacement bulbs available: PISPACBULB-1.
Item#:
PISPACLITE
Available:
In Stock
16.7100
Your Price:
14.20
EACH
Replacement bulb incandescent
Replacement incandescent bulb for Paclite marker light. New style.
Item#:
PISPACBULB-1
Available:
In Stock
1.0400
Your Price:
0.88
EACH
Pole and float light setup
A durable, heavy-duty jacklight set-up.
Pole is 1-1/4" O.D. schedule 40 aluminum tubing.
Float is a yellow grommeted seine float.
Steel weight is crimped in place (not screwed in).
Female acme threaded socket on top of the mast.
Fits a Paclite 2 cell light or the ITM 2 cell Strobe light.
Length: 50".
Pole is 1-1/4" O.D. schedule 40 aluminum tubing.
Float is a yellow grommeted seine float.
Steel weight is crimped in place (not screwed in).
Female acme threaded socket on top of the mast.
Fits a Paclite 2 cell light or the ITM 2 cell Strobe light.
Length: 50".
Item#:
SMFFP02
Available:
Out of Stock
135.7700
Your Price:
108.61
EACH
Call to Order
Pole and float light setup
A durable, heavy-duty jacklight set-up.
Pole is 1-1/4" O.D. schedule 40 aluminum tubing.
Float is a yellow grommeted seine float.
Steel weight is crimped in place (not screwed in).
Female acme threaded socket on top of the mast.
Fits a Paclite 2-cell light or the ITM 2-cell strobe light.
Length: 30".
Pole is 1-1/4" O.D. schedule 40 aluminum tubing.
Float is a yellow grommeted seine float.
Steel weight is crimped in place (not screwed in).
Female acme threaded socket on top of the mast.
Fits a Paclite 2-cell light or the ITM 2-cell strobe light.
Length: 30".
Item#:
SMFFP01
Available:
In Stock
122.9800
Your Price:
98.38
EACH