Allows push-on fitting to install quickly, without tools. Unique spiral angle design and polyester reinforcement. Designed to hold fittings up to 250 psi. Provides smooth, safe performance in harsh conditions. High oil resistance. Diameter: 1/4". Color: Black.

Allows push-on fitting to install quickly, without tools. Unique spiral angle design and polyester reinforcement. Designed to hold fittings up to 250 psi. Provides smooth, safe performance in harsh conditions. High oil resistance. Diameter: 5/16". Color: Black.

Allows push-on fitting to install quickly, without tools. Unique spiral angle design and polyester reinforcement. Designed to hold fittings up to 250 psi. Provides smooth, safe performance in harsh conditions. High oil resistance. Diameter: 3/8". Color: Black.

Allows push-on fitting to install quickly, without tools. Unique spiral angle design and polyester reinforcement. Designed to hold fittings up to 250 psi. Provides smooth, safe performance in harsh conditions. High oil resistance. Diameter: 1/2". Color: Black.

Flexible wire-reinforced hose. For use with Beckson hand pumps. Diameter: 1-1/4". Length: 6 feet.

Double-ply soft wall, no wire.
For straight connection in wet exhaust systems.
Okay for either gasoline or diesel engines.
Designed for coolant and heat resistance.
Color: Black with blue stripe.
Temperature range: 0° to 212° F.
Diameter: 3-1/8".
Length: 12.5 feet.

Length: 50 feet. Color: Blue.

Clear PVC with a black vinyl helix. Abrasion, saltwater, and chemical resistant, flexible. Often used for: - Bilge pump discharge - Potable water tanks fills - Drains for sinks, showers, livewells, or scuppers. This hose uses 147 right hand thread cuffs. Do not attach to thru hull fitting below the water line. Not for use with glycol-based antifreeze. Diameter: 1-1/2".  NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.  Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Prevents damage to lines due to rubbing and chafing.
Color: Blue.
1-1/4" filled.
2" flat.

Solid brass swivel fittings.
One side is 1" 20 female for a tee connection; other side is 1" 20 male with O-ring and check valve for an appliance connection.
This hose will connect with gas grill adapter tees.
Fully assembled and leak tested.
Length: 12 feet.

Smooth cover, clear PVC with white vinyl helix. Rated for full vacuum. Resistant to mild chemicals and saltwater. Used for: - Bilge pump intake and discharge - Livewell intake and drain - Sanitation: intake, vent and pump out. Designed for connections below the waterline. Not for use in pressurized systems or with antifreeze. Diameter: 1-1/8".

Smooth cover, clear PVC with white vinyl helix. Rated for full vacuum. Resistant to mild chemicals and saltwater. Used for: - Bilge pump intake and discharge - Livewell intake and drain - Sanitation: intake, vent and pump out. Designed for connections below the waterline. Not for use in pressurized systems or with antifreeze. Diameter: 1-1/2".

Smooth cover, clear PVC with white vinyl helix. Rated for full vacuum. Resistant to mild chemicals and saltwater. Used for: - Bilge pump intake and discharge - Livewell intake and drain - Sanitation: intake, vent and pump out. Designed for connections below the waterline. Not for use in pressurized systems or with antifreeze. Diameter: 1-1/4".

Single-layer, corrugated polyethylene hose.
Resistant to mild chemicals and salt water.
Has a clamping cuff every foot.
This hose is primarily used for bilge pump discharge.
Diameter: 1-1/8".
Color: White.

Fire retardant marine fuel hose. Designed for use with alcohol-enhanced gasoline. Reinforced with 2 spirals of high-strength synthetic fabric. Helical wire imbedded between fabric for kink resistance. Diameter: 1-7/8".

Single-layer, corrugated polyethylene hose.
Resistant to mild chemicals and salt water.
Has a clamping cuff every foot.
This hose is primarily used for bilge pump discharge.
Diameter: 1-1/2".
Color: White.
50 feet per carton.

Allows push-on fitting to install quickly, without tools. Unique spiral angle design and polyester reinforcement. Designed to hold fittings up to 250 psi. Provides smooth, safe performance in harsh conditions. High oil resistance. Diameter: 5/8". Color: Black.

Single-layer, corrugated polyethylene hose.
Resistant to mild chemicals and salt water.
Has a clamping cuff every foot.
This hose is primarily used for bilge pump discharge.
Diameter: 1-1/4".

Black smooth vinyl cover with a helix. Rated for full vacuum. Resistant to chemicals and saltwater. Primarily used for bilge pump and discharge purposes. Easily bent, OK for below waterline connections. Diameter: 1".

For Dickinson propane heaters and stove. Length: 10 feet.

For Dickinson propane heaters and stove. Length: 20 feet.

Fire-retardant marine fuel hose.
Resists alcohol-enhanced gasoline.
High nitrile rubber construction.
Reinforced with two spirals of synthetic fabric.
Diameter: 5/16".
50 feet per box.

Easily converts a gas grill or other portable LP gas appliance from using small disposable bottles to a larger, refillable cylinder.
Fully assembled and leak tested.
Great for boats, camping, picnics, and more.
Equipped with a hand-wheel POL cylinder fitting on one end, and a high-pressure appliance valve fitting on the other.
Length: 12 feet.

Clear PVC with a black vinyl helix. Abrasion, saltwater, and chemical resistant, flexible. Often used for: - Bilge pump discharge - Potable water tanks fills - Drains for sinks, showers, livewells, or scuppers. This hose uses 147 right hand thread cuffs. Do not attach to thru hull fitting below the water line. Not for use with glycol-based antifreeze. Diameter: 3/4".

High-temperature, single wire braid reinforced hose.
Synthetic rubber construction.
Often used with E-series Flextral crimps.
Size: #12, 3/4".
Work pressure: 1500 psi.
Color: Blue.
SAE J1942/1 USCG - HF Type B accepted.

High-temperature, single wire braid reinforced hose.
Synthetic rubber tube.
Used with E-series Flextral crimps.
Size: #8, 1/2".
Work pressure: 2300 psi.
Color: Blue.
SAE J1942/1 USCG - HF Type B accepted.

Fire-retardant marine fuel hose. Resists alcohol-enhanced gasolines. High nitrile rubber construction. Reinforced with two spirals of synthetic fabric. Diameter: 1/2". 50 feet per box.

High quality multi-purpose rubber hose with EPDM liner Great wash-down hose

High quality multi-purpose rubber hose with EPDM liner Great wash-down hose

High quality multi-purpose rubber hose with EPDM liner Great wash-down hose

High quality multi-purpose rubber hose with EPDM liner Great wash-down hose

High quality multi-purpose rubber hose with EPDM liner Great wash-down hose

Single-layer, corrugated polyethylene hose.
Resistant to mild chemicals and salt water.
Has a clamping cuff every foot.
This hose is primarily used for bilge pump discharge.
Diameter: 3/4".
Color: Black.
50 feet per box.

Single-layer, corrugated polyethylene hose.
Resistant to mild chemicals and salt water.
Has a clamping cuff every foot.
This hose is primarily used for bilge pump discharge.
Diameter: 3/4".
Color: Black.

Fire retardant marine fuel hose. Designed for use with alcohol-enhanced gasoline. Reinforced with 2 spirals of high-strength synthetic fabric. Helical wire imbedded between fabric for kink resistance. Diameter: 2-3/8".