Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
S2K Commerce - Products Dropdown
Actions
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22
S2K Commerce - Order Entry
Actions
Bolt and trunnion hose clamp
Ideally suited for extreme clamping situations. For high-durometer, multi-wire suction or high pressure hose Built entirely from AISI 316 stainless steel. Features a heavy formed bridge under the bolt. May be used in high-temperature applications. Has a mechanical band interlock instead of spotwelds. Band width: 18 mm. Size range: 40 - 43 mm, 1/9/16" - 1-11/16".
Item#:
AWAB118043B
Manufacturer:
AWAB
Available:
Out of Stock
13.2400
Your Price:
11.26
EACH
Call to Order
Bolt and trunnion hose clamp
Ideally suited for extreme clamping situations. For high-durometer, multi-wire suction or high pressure hose Built entirely from AISI 316 stainless steel. Features a heavy formed bridge under the bolt. May be used in high-temperature applications. Has a mechanical band interlock instead of spotwelds. Band width: 20 mm. Size range: 51 - 55 mm, 2" - 2-3/16".
Item#:
AWAB118055B
Manufacturer:
AWAB
Available:
Out of Stock
12.9600
Your Price:
11.01
EACH
Call to Order
Stainless steel hose clamp
Designed with rolled band edges to eliminate damage to hoses.
Cast from a corrosion-resistant stainless steel alloy.
Stamped exterior threads leave the interior smooth.
Ideal for use in corrosive marine environments.
Suitable for plastic and rubber hoses.
Resists vibration back-off when properly installed.
Cast from a corrosion-resistant stainless steel alloy.
Stamped exterior threads leave the interior smooth.
Ideal for use in corrosive marine environments.
Suitable for plastic and rubber hoses.
Resists vibration back-off when properly installed.
Item#:
AWAB-SS
Manufacturer:
AWAB
Galvanized plumbers tape
Steel strap. Quick and inexpensive way to hang pipe from joists or rafter 3/4" X 10 feet. 26 gauge.
Item#:
MID970200
Available:
In Stock
10.8800
Your Price:
9.25
EACH
Jubilee 316 stainless hose clamps
Jubilee Original Range "gold standard" wormgear hose clamps.
High-quality 316 stainless steel.
Ideal for shipbuilding and marine maintenance.
Resists salt spray and high-corrosion, aggressive environments.
Invented in England in 1921, and still manufactured there.
Certified SAE J1508 Type FE.
Available in many sizes, please select from below:
Item#:
VBCJ316-SZ
Micro-Gear hose clamp
A slim hose clamp with a low-profile housing.
Tiny, tough, and precision-engineered for confined areas.
Marine-grade 316 stainless steel construction.
1/4" hex head.
Installs at 10-15 in-lbs of torque.
Size: 04.
Opening range: 5/16" - 5/8" (8mm - 16mm).
Tiny, tough, and precision-engineered for confined areas.
Marine-grade 316 stainless steel construction.
1/4" hex head.
Installs at 10-15 in-lbs of torque.
Size: 04.
Opening range: 5/16" - 5/8" (8mm - 16mm).
Item#:
IDL359004706
Manufacturer:
Ideal Clamp Products
Available:
In Stock
3.2200
Your Price:
2.90
EACH
Micro-Gear hose clamp
A slim hose clamp with a low-profile housing.
Tiny, tough, and precision-engineered for confined areas.
Marine-grade 316 stainless steel construction.
1/4" hex head.
Installs at 10-15 in-lbs of torque.
Size: 06.
Opening range: 5/16" - 7/8" (8mm - 22mm).
Tiny, tough, and precision-engineered for confined areas.
Marine-grade 316 stainless steel construction.
1/4" hex head.
Installs at 10-15 in-lbs of torque.
Size: 06.
Opening range: 5/16" - 7/8" (8mm - 22mm).
Item#:
IDL359006706
Manufacturer:
Ideal Clamp Products
Available:
In Stock
3.2700
Your Price:
2.94
EACH
Stainless steel hose clamp
Stainless steel hose clamp.
Consists of a single unbroken band with rounded edges.
Cast from a corrosion-resistant stainless steel alloy.
Ideal for use in corrosive marine environments.
Especially suitable for small plastic and rubber hoses.
Band width: 23/64".
Size: 19/32" - 11/16".
Consists of a single unbroken band with rounded edges.
Cast from a corrosion-resistant stainless steel alloy.
Ideal for use in corrosive marine environments.
Especially suitable for small plastic and rubber hoses.
Band width: 23/64".
Size: 19/32" - 11/16".
Item#:
AWAB306017
Manufacturer:
AWAB
Available:
In Stock
2.2700
Your Price:
1.93
EACH
Stainless steel hose clamp
Stainless steel hose clamp.
Consists of a single unbroken band with rounded edges.
Cast from a corrosion-resistant stainless steel alloy.
Ideal for use in corrosive marine environments.
Especially suitable for small plastic and rubber hoses.
Band width: 23/64".
Size: 5/16" - 13/32".
Consists of a single unbroken band with rounded edges.
Cast from a corrosion-resistant stainless steel alloy.
Ideal for use in corrosive marine environments.
Especially suitable for small plastic and rubber hoses.
Band width: 23/64".
Size: 5/16" - 13/32".
Item#:
AWAB306010
Manufacturer:
AWAB
Available:
In Stock
2.0800
Your Price:
1.77
EACH
Stainless steel hose clamp
Stainless steel hose clamp.
Consists of a single unbroken band with rounded edges.
Cast from a corrosion-resistant stainless steel alloy. Ideal for use in corrosive marine environments.
Especially suitable for small plastic and rubber hoses.
Band width: 23/64".
Size: 9/32" - 3/8".
Consists of a single unbroken band with rounded edges.
Cast from a corrosion-resistant stainless steel alloy. Ideal for use in corrosive marine environments.
Especially suitable for small plastic and rubber hoses.
Band width: 23/64".
Size: 9/32" - 3/8".
Item#:
AWAB306009
Manufacturer:
AWAB
Available:
In Stock
2.0000
Your Price:
1.70
EACH
Stainless steel hose clamp
Stainless steel hose clamp.
Consists of a single unbroken band with rounded edges.
Cast from a corrosion-resistant stainless steel alloy.
Ideal for use in corrosive marine environments.
Especially suitable for small plastic and rubber hoses.
Band width: 23/64".
Size: 15/64" - 21/64".
Consists of a single unbroken band with rounded edges.
Cast from a corrosion-resistant stainless steel alloy.
Ideal for use in corrosive marine environments.
Especially suitable for small plastic and rubber hoses.
Band width: 23/64".
Size: 15/64" - 21/64".
Item#:
AWAB306008
Manufacturer:
AWAB
Available:
In Stock
2.0000
Your Price:
1.70
EACH
Clampco T-bolt hose clamp
Perfect for making leak-proof connections.
300 series stainless steel provides high tensile strength, durability, and corrosion resistance.
Bands have rounded edges to protect hoses.
T-bolt tightens with a 7/16" hex nut.
Band is .025" thick, .75" wide.
Item#:
DIXSTBC-SZ
Bolt and trunnion hose clamp
Ideally suited for extreme clamping situations. For high-durometer, multi-wire suction or high pressure hose Built entirely from AISI 316 stainless steel. Features a heavy formed bridge under the bolt. May be used in high-temperature applications. Has a mechanical band interlock instead of spotwelds. Band width: 25 mm. Size range: 85 - 91 mm, 3-3/8" - 3-9/16".
Item#:
AWAB120091B
Manufacturer:
AWAB
Available:
In Stock
23.4000
Your Price:
19.89
EACH
Stainless steel hose clamp, mini
Consists of a single unbroken band with rounded edges.
Cast from a corrosion-resistant stainless steel alloy.
Ideal for use in corrosive marine environments.
Especially suitable for small plastic and rubber hoses.
Cast from a corrosion-resistant stainless steel alloy.
Ideal for use in corrosive marine environments.
Especially suitable for small plastic and rubber hoses.
Item#:
AWAB-SSMINI
Non-perforated hose clamp
Non-perforated (embossed) hose clamp.
Designed for use with silicone rubber and other soft hoses.
All 316 stainless steel construction.
Salt water resistant, low magnetic permeability.
Appropriate for use in shipbuilding, near electronic circuitry, in defense technology or food processing, or in sewage treatment connections.
Installation torque: 44 in-lbs (5.0 Nm) for most applications.
Designed for use with silicone rubber and other soft hoses.
All 316 stainless steel construction.
Salt water resistant, low magnetic permeability.
Appropriate for use in shipbuilding, near electronic circuitry, in defense technology or food processing, or in sewage treatment connections.
Installation torque: 44 in-lbs (5.0 Nm) for most applications.
Item#:
IDL534050-SZ
Manufacturer:
Ideal Clamp Products
Bolt and trunnion hose clamp
Ideally suited for extreme clamping situations.
For high-durometer, multi-wire suction or high pressure hose.
Built entirely from AISI 316 stainless steel.
Features a heavy formed bridge under the bolt.
May be used in high-temperature applications.
Has a mechanical band interlock instead of spot welds.
For high-durometer, multi-wire suction or high pressure hose.
Built entirely from AISI 316 stainless steel.
Features a heavy formed bridge under the bolt.
May be used in high-temperature applications.
Has a mechanical band interlock instead of spot welds.
Item#:
AWAB-TBOLT
Manufacturer:
AWAB
Stainless steel hose clamps
Hy-Gear 67-4 hose clamp.
Formed from corrosion-resistant 300 grade stainless steel.
The screw that tightens the band has a 5/16″" hex head.
1/2" wide band.
Suggested installation torque: 35 inch-pounds (4 Nm).
Meets Uniform Plumbing Code (UPC) standards; IAPMO listed.
Formed from corrosion-resistant 300 grade stainless steel.
The screw that tightens the band has a 5/16″" hex head.
1/2" wide band.
Suggested installation torque: 35 inch-pounds (4 Nm).
Meets Uniform Plumbing Code (UPC) standards; IAPMO listed.
Item#:
IDL670040-SZ
Manufacturer:
Ideal Clamp Products
Bilgeflex 120 hose
Single-layer, corrugated polyethylene hose.
Resistant to mild chemicals and salt water.
Has a clamping cuff every foot.
This hose is primarily used for bilge pump discharge.
Diameter: 5/8".
Color: White.
Resistant to mild chemicals and salt water.
Has a clamping cuff every foot.
This hose is primarily used for bilge pump discharge.
Diameter: 5/8".
Color: White.
Item#:
SHD120-0586
Manufacturer:
SeaStar Solutions
Available:
In Stock
1.0000
Your Price:
0.80
FOOT
Heavy-duty Vac hose
Smooth cover, clear PVC with white vinyl helix. Rated for full vacuum. Resistant to mild chemicals and saltwater. Used for: - Bilge pump intake and discharge - Livewell intake and drain - Sanitation: intake, vent and pump out. Designed for connections below the waterline. Not for use in pressurized systems or with antifreeze. Diameter: 3".
Item#:
SHD146-3000
Manufacturer:
SeaStar Solutions
Available:
In Stock
Your Price:
9.93
FOOT
Novaflex 200 wet exhaust hose
Polyester fabric.
Designed for a range of water transfer/discharge solutions.
Softwall, non-wire construction.
Great for straight routings, not for steam.
Great for bilge, toilet, scupper and water discharge.
Meets SAE J2006R1 for marine exhaust hose.
Color: Black with blue stripe.
Rated for -40°F to 250°F.
Diameter: 1-3/8".
Designed for a range of water transfer/discharge solutions.
Softwall, non-wire construction.
Great for straight routings, not for steam.
Great for bilge, toilet, scupper and water discharge.
Meets SAE J2006R1 for marine exhaust hose.
Color: Black with blue stripe.
Rated for -40°F to 250°F.
Diameter: 1-3/8".
NOTE: Due to the size of this product, shipping via UPS or USPS may be cost prohibitive.
Please contact us for shipping options. Item#:
NOV20001375
Manufacturer:
Novaflex
Available:
In Stock
7.9424
Your Price:
6.35
Novaflex 200 wet exhaust hose
Polyester fabric.
Designed for a range of water transfer/discharge solutions.
Softwall, non-wire construction.
Great for straight routings, not for steam.
Great for bilge, toilet, scupper and water discharge.
Meets SAE J2006R1 for marine exhaust hose.
Color: Black with blue stripe.
Rated for -40°F to 250°F.
Designed for a range of water transfer/discharge solutions.
Softwall, non-wire construction.
Great for straight routings, not for steam.
Great for bilge, toilet, scupper and water discharge.
Meets SAE J2006R1 for marine exhaust hose.
Color: Black with blue stripe.
Rated for -40°F to 250°F.
NOTE: Due to the size of this product, shipping via UPS or USPS may be cost prohibitive.
Please contact us for shipping options. Item#:
NOV20002750
Manufacturer:
Novaflex
Available:
In Stock
Oversized Shipping
13.5752
Your Price:
10.86
Exhaust / fuel fill hose
Novaflex multi-purpose marine hose. Designed to meet fuel fill hose requirements and to perform as a marine exhaust hose. Black nitrile reinforced with polyester fabric and wire. Flame resistant. Size: 5/8". Available by the foot or on 50 foot reel.
Item#:
NOV84200625
Manufacturer:
Novaflex
Available:
In Stock
7.1500
Your Price:
5.72
FOOT
Novaflex 200 wet exhaust hose
Polyester fabric.
Designed for a range of water transfer/discharge solutions.
Softwall, non-wire construction.
Great for straight routings, not for steam.
Great for bilge, toilet, scupper and water discharge.
Meets SAE J2006R1 for marine exhaust hose.
Color: Black with blue stripe.
Rated for -40°F to 250°F.
Diameter: 3-1/4".
Designed for a range of water transfer/discharge solutions.
Softwall, non-wire construction.
Great for straight routings, not for steam.
Great for bilge, toilet, scupper and water discharge.
Meets SAE J2006R1 for marine exhaust hose.
Color: Black with blue stripe.
Rated for -40°F to 250°F.
Diameter: 3-1/4".
NOTE: Due to the size of this product, shipping via UPS or USPS may be cost prohibitive.
Please contact us for shipping options. Item#:
NOV20003250
Manufacturer:
Novaflex
Available:
In Stock
Oversized Shipping
16.1512
Your Price:
1.78
Spray nozzle
Plastic construction.
Garden hose connection.
4-1/2" long.
Garden hose connection.
4-1/2" long.
Item#:
MID30-630
Available:
Out of Stock
7.4900
Your Price:
6.37
EACH
Call to Order
Fire hose fog nozzle - 1-1/2"
Fire hose fog nozzle. Polycarbonate construction. Adjustable combination fog and stream nozzle. Virtually indestructible and nearly weightless. Perfect for pin racks and single jacket hoses. Size: 1-1/2", NST threads. Weight: .4 lb.
Item#:
AFP1575NST
Available:
Out of Stock
40.4600
Your Price:
34.39
EACH
Call to Order
Side mount bracket
For use with Glendinning Hosemaster units.
Item#:
GMP60512
Manufacturer:
Glendinning Marine
Available:
In Stock
10.4500
Your Price:
9.93
EACH
Edge mounting bracket
For use with Glendinning Hosemaster units.
Item#:
GMP60511
Manufacturer:
Glendinning Marine
Available:
In Stock
9.1400
Your Price:
8.69
EACH
Diesel nozzle
Designed for durability. All parts easily replaceable. Mates with standard hardwall or softwall 1" hoses..
Item#:
PRBCATNM1
Available:
Out of Stock
387.2700
Your Price:
329.18
EACH
Call to Order
Has an adjustable spray pattern, from a powerful jet to a light spray.
Soft rubber comfort grip for a easy hold.
Fits any standard hose.
Great for washdown.
Soft rubber comfort grip for a easy hold.
Fits any standard hose.
Great for washdown.
Item#:
CCO41987
Manufacturer:
Camco Manufacturing
Available:
In Stock
30.7500
Your Price:
24.60
EACH
Deck Wash Nozzle Kit
Spray nozzle kit for Hose Master Weight: 2 lbs
Item#:
GMP99582DKU
Manufacturer:
Glendinning Marine
Available:
Out of Stock
144.9300
Your Price:
137.69
EACH
Call to Order
Brass hose nozzle
Brass with satin finish. For use up to 100 PSI. Thread size: 1-1/2". Length: 10".
Item#:
PRBBN15
Available:
In Stock
131.6500
Your Price:
111.90
EACH
Quick-connect hose nozzle
Multiple flow control settings. Can work with both fresh and salt water. Designed for use with washdown pumps.
Item#:
JAB30703-1000
Manufacturer:
Jabsco, Flojet, Rule, Xylem
Available:
In Stock
48.5800
Your Price:
36.92
EACH
Hose nozzle
Brass construction. Adjustable spray. 3/4" hose connection. Length: 4".
Item#:
MID30-638
Available:
In Stock
29.6000
Your Price:
25.16
EACH
Fire hose fog nozzle - 1-1/2"
Fire hose fog nozzle. Polycarbonate construction. Adjustable combination fog and stream nozzle. Virtually indestructible and nearly weightless. Perfect for pin racks and single jacket hoses. Size: 1-1/2", NPT threads. Weight: .4 lb.
Item#:
AFP1575NPT
Available:
In Stock
40.4600
Your Price:
34.39
EACH
Fire hose fog nozzle gasket
Replacement gasket for fire hose fog nozzles. Creates a leakproof seal. Weight: .01 lb.
Item#:
AFP160
Available:
In Stock
3.9200
Your Price:
3.33
EACH
Radiator bushing
Rubber construction. Dimensions: 2" X 1.75".
Item#:
ARS58983
Available:
In Stock
27.3000
Your Price:
23.21
EACH