Propane / liquid petroleum gas (LPG) supply hose. Thermoplastic construction. Both ends are 3/8" female flare fittings. Length: 15 feet.

High pressure LPG hose with solid brass.
3/8" female swivel flare fittings on each end.
Many people prefer to use hose over copper supply line tubing in their LP gas installations, because it won't corrode, or develop stress fatigue cracks.
Fully assembled and leak tested.
Length: 10 feet.
UL listed.

For sanitation system connections. Multi-purpose, smooth-walled hose. For bilge, drain, or potable water uses. Temperature range: -13° to 158° F. Diameter: 1-1/4".

For sanitation system connections. Multi-purpose, smooth-walled hose. For bilge, drain, or potable water uses. Temperature range: -13° to 158° F. Diameter: 1-1/2".

Designed to connect wall-mounted regulators
to LPG gas cylinders with Type I valves.
One end has a 1/4" male inverted flare fitting.
Other end has a thermoplastic QCC nut for quick and easy hand tight connection.
The "new-style" QCC connection will not allow any gas to flow through unless properly connected, and has a heat-sensing fail-safe feature that shuts off all gas flow if the the temperature reaches 2400° to 3000° F. Additionally, a controlled-flow device will activate in the case of a downstream gas system break (activates at 200 cubic feet / hour).
Fully assembled, leak-tested, and UL listed.
Length: 20".

For sanitation system connections. Multi-purpose, smooth-walled hose. For bilge, drain, or potable water uses. Temperature range: -13° to 158° F. Diameter: 1-1/8".

Designed for engine intake, bilge discharge and other lines. Reinforced with wire helix embedded in synthetic material. Excellent flexibility and bend radius. Resists heat, fumes, ozone, acid, salt water and abrasion. Color: Black with blue stripe. Diameter: 3". Length: 12.5 feet.

For sanitation system connections. Multi-purpose, smooth-walled hose. For bilge, drain, or potable water uses. Temperature range: -13° to 158° F. Diameter: 5/8".

Single-layer, corrugated polyethylene hose.
Resistant to mild chemicals and salt water.
Has a clamping cuff every foot.
This hose is primarily used for bilge pump discharge.
Diameter: 5/8".
Color: Black.

Withstands water up to 180 degrees.
Stays flexible in cold temperatures.
3/4" diameter.
50 feet long.
Color: Red.

For sanitation system connections. Multi-purpose, smooth-walled hose. For bilge, drain, or potable water uses. Temperature range: -13° to 158° F. Diameter: 3/4".

Fire-retardant marine fuel hose.
Resists alcohol-enhanced gasoline.
High nitrile rubber construction.
Reinforced with two spirals of synthetic fabric.
Diameter: 1/4".
50 feet per box.

Fire-retardant marine fuel hose. Resists alcohol-enhanced gasolines. High nitrile rubber construction. Reinforced with two spirals of synthetic fabric. Diameter: 1/4". 250 feet per spool.

Fire-retardant marine fuel hose. Resists alcohol-enhanced gasolines. High nitrile rubber construction. Reinforced with two spirals of synthetic fabric. Diameter: 1/2". 250 feet per spool.

Flexible, lightweight PVC hose. Reinforced with vinyl-covered steel wire. Smooth-walled for good flow. Resists chemicals and saltwater. Color: White. Diameter: 1-1/4".

Single-layer, corrugated polyethylene hose.
Resistant to mild chemicals and salt water.
Has a clamping cuff every foot.
This hose is primarily used for bilge pump discharge.
Diameter: 5/8".
Color: White.

Smooth cover, clear PVC with white vinyl helix. Rated for full vacuum. Resistant to mild chemicals and saltwater. Used for: - Bilge pump intake and discharge - Livewell intake and drain - Sanitation: intake, vent and pump out. Designed for connections below the waterline. Not for use in pressurized systems or with antifreeze. Diameter: 3".

Smooth cover, clear PVC with white vinyl helix. Rated for full vacuum. Resistant to mild chemicals and saltwater. Used for: - Bilge pump intake and discharge - Livewell intake and drain - Sanitation: intake, vent and pump out. Designed for connections below the waterline. Not for use in pressurized systems or with antifreeze. Diameter: 5/8".

Flexible PVC with a rigid helix. Smooth bore, corrugated exterior. For ventilation, blowers, fumes, and more. Color: Clear and black. Diameter: 1/2".

Polyester fabric.
Designed for a range of water transfer/discharge solutions.
Softwall, non-wire construction.
Great for straight routings, not for steam.
Great for bilge, toilet, scupper and water discharge.
Meets SAE J2006R1 for marine exhaust hose.
Color: Black with blue stripe.
Rated for -40°F to 250°F.
Diameter: 1-3/8".

Please contact us for shipping options. 

Polyester fabric.
Designed for a range of water transfer/discharge solutions.
Softwall, non-wire construction.
Great for straight routings, not for steam.
Great for bilge, toilet, scupper and water discharge.
Meets SAE J2006R1 for marine exhaust hose.
Color: Black with blue stripe.
Rated for -40°F to 250°F.

Please contact us for shipping options. 

Novaflex multi-purpose marine hose. Designed to meet fuel fill hose requirements and to perform as a marine exhaust hose. Black nitrile reinforced with polyester fabric and wire. Flame resistant. Size: 5/8". Available by the foot or on 50 foot reel.

Nitrile thermoplastic laminate (NTL) tube.
Reinforced with multiple high tensile textile spirals.
Covered with black OZO.
Formulated for gasoline, diesel and alcohol.
Flame-resistant, designed for engine compartments.
Meets all requirements of USCG, NMMA, ABYC.
Size: 5/16".
Available as 250 foot spool.

A complete wash kit.
Great for marine use or general cleaning, like car washing, daily gardening and more.
Coiled hose won't kink.
Includes:
- 20-foot coiled hose
- Nozzle with thumb lever and a spray pattern adjustment dial
- Swiveling/quick connect fitting
- Vented storage bag with a carry handle and D-ring.

Polyester fabric.
Designed for a range of water transfer/discharge solutions.
Softwall, non-wire construction.
Great for straight routings, not for steam.
Great for bilge, toilet, scupper and water discharge.
Meets SAE J2006R1 for marine exhaust hose.
Color: Black with blue stripe.
Rated for -40°F to 250°F.
Diameter: 3-1/4".

Please contact us for shipping options.