Bronze construction. Patented selectable rotating handle. Accept standard ratchet. 400 WOG rated. Full pipe size flow. Stainless steel handle and hardware. Chrome plated solid brass ball (not a hollow ball). Bonding attachment. PTFE seats and seals. UL Listed for fuel. Diameter: 1".

High-quality aluminum construction. Provides anti-siphon protection on all gasoline-powered boat 3/8" male NPT to 3/8" hose barb.

SCH 40 PVC Ball Valves 1/2 FNPT 150 PSI Max.

SCH 40 PVC Ball Valves 3/4 FNPT 150 PSI Max.

SCH 40 PVC Ball Valves 1 FNPT 150 PSI Max.

Stainless steel.
Female to male.
3/8".

Bronze body with a stainless steel spring. Diameter: 1-1/2".

Bronze body with a stainless steel spring. Diameter: 1-1/4".

Creates and maintains pump prime. Doubles pump lift for Guzzler "400" Series pumps. Prevents fluid backflow. Flapper valves are standard. Durable, lightweight Delrin plastic. For 1-1/4" hose.

Brass construction.
Used to connect permanent tank to a single motor.
Hose barb: 3/8".
Pipe thread: 1/4".

Provides anti-siphon protection on gasoline-powered boats. Made of tough aluminum. Features 1/4 NPT threads.

Brass body, large port, blow-out proof stem, screwed ends Service in steam, water, oil and gas 2 piece screwed type brass body Viton double O-ring stem packing Zinc-plated hardened, plastic-covered lever handle remains cool in high temperature installation Hard chromium plated brass ball Federal specs: WW-V-35, Type 11, Class A, Style 3 Weight: .4 lb

Brass body, large port, blow-out proof stem, screwed ends Service in steam, water, oil and gas 2 piece screwed type brass body Viton double O-ring stem packing Zinc-plated hardened, plastic-covered lever handle remains cool in high temperature installation Hard chromium plated brass ball Federal specs: WW-V-35, Type 11, Class A, Style 3 Weight: .54 lb

Brass body, large port, blow-out proof stem, screwed ends Service in steam, water, oil and gas 2 piece screwed type brass body Viton double O-ring stem packing Zinc-plated hardened, plastic-covered lever handle remains cool in high temperature installation Hard chromium plated brass ball Federal specs: WW-V-35, Type 11, Class A, Style 3 Weight: .41 lb

Brass body, large port, blow-out proof stem, screwed ends Service in steam, water, oil and gas 2 piece screwed type brass body Viton double O-ring stem packing Zinc-plated hardened, plastic-covered lever handle remains cool in high temperature installation Hard chromium plated brass ball Federal specs: WW-V-35, Type 11, Class A, Style 3 Weight: .83 lb

Forespar MF 850 ball valve. Molded from high-strength Marelon. Strong, lightweight, and non-corrosive. Controls inlet/outlet needs both above and below waterlines. Body size: 3" X 1-7/8". Threads: 3/4" NPT. Weight: .35 lb.

Forespar MF 850 ball valve. Molded from high-strength Marelon. Strong, lightweight, and non-corrosive. Controls inlet/outlet needs both above and below waterlines. Body size: 4-1/4" X 5-7/8". Threads: 2" NPT. Weight: 2 lb.

Forespar MF 850 ball valve. Molded from high-strength Marelon. Strong, lightweight, and non-corrosive. Controls inlet/outlet needs both above and below waterlines. Body size: 3-1/2" X 5". Threads: 1-1/2" NPT. Weight: 1.35 lb.

Forespar MF 850 ball valve. Molded from high-strength Marelon. Strong, lightweight, and non-corrosive. Controls inlet/outlet needs both above and below waterlines. Body size: 2-3/4" X 4-7/8". Threads: 1-1/4" NPT. Weight: 1 lb.

Slip ball connection. Slip ends. Rated for 150 PSI. Diameter: 2".

Slip ball connection. Threaded ends. Rated for 150 PSI. Diameter: 1-1/2".

Slip ball connection. Threaded ends. Rated for 150 PSI. Diameter: 2".

Slip ball connection. Threaded ends. Rated for 150 PSI. Diameter: 1".

Slip ball connection. Threaded ends. Rated for 150 PSI. Diameter: 1-1/4".

Brass construction. Meets ABYC H-24 requirements. Provides anti-syphon protection. Size: 1/4".

Female 3-way valve bottom outlet. Allows the connection of two permanent tanks to one motor. Will only draw from one tank at a time. Brass construction. Size: 3/8". Weight: .3 lb.

Bronze body with a stainless steel spring. Diameter: 1".

Bronze body with a stainless steel spring. Diameter: 2".

Stainless steel.
Rated for 1000 PSI.
Size: 3/4".

Stainless steel. Female to male. Size: 3/8".

Stainless steel.
Rated for 1000 PSI.
Size: 1/4".

Bronze body with a stainless steel spring. Diameter: 1/2".

Bronze body with a stainless steel spring. Diameter: 3/4".

Brass body, large port, blow-out proof stem, screwed ends Service in steam, water, oil and gas 2 piece screwed type brass body Viton double O-ring stem packing Zinc-plated hardened, plastic-covered lever handle remains cool in high temperature installation Hard chromium plated brass ball Federal specs: WW-V-35, Type 11, Class A, Style 3 Weight: 16 lbs

Female 3-way valve bottom outlet. Allows the connection of two permanent tanks to one motor. Will only draw from one tank at a time. Brass construction. Size: 1/4". Connectors on three sides. Handle "clicks" into position.

Bronze construction.
Full flow drain and grounding screw.
Hard chrome bronze ball.
Vinyl-coated stainless steel handle.
Pipe: 1-1/2".
 
---
WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Do not use in connection with drinking water. Wash hands after handling.