It's razor clam season! When the weather starts getting colder, it's time to head to the coast!

The Pacific razor clam is one of the most popular types of shellfish harvested in Washington state. They're super meaty with a narrow, slightly curved shell -- much like the handle or blade of an old-style straight razor. (The edge of the clamshell can be "razor-sharp" too, so watch your fingers when you're digging!)

The folks that live in the Pacific Northwest are lucky to have one of the best razor clam locations in the world. Digging for these delicious clams is a fun activity suitable for all members of your family, from kids to grandparents. Depending on where you go, you might see as many as a thousand other razor clam seekers sharing the beach. But don't worry: there are plenty of razor clams for everyone.

So how do you prepare to go razor clam digging?

You definitely need the right gear before you go.
The basic setup for a day of razor clamming includes:
 1) The correct license
 2) A clam shovel or clam gun
 3) A clam net bag to hold your catch

First, make sure you have the proper Washington state license. You will need a razor clam license to harvest clams legally (or one of the shellfish/seaweed combo licenses, there are several different kinds). You can order one online, by phone, or at an authorized license dealer. Once you have it, you'll need to keep that license in your possession while you're digging and after you've caught your limit (in case a ranger needs to inspect it).

Next, you'll need a tool to actually dig down and pull those elusive clams out of the sand. The Danielson clam gun is one option of that necessary gear (the other option is a clam shovel).

This clam gun has been engineered specifically for removing razor clams from sandy ocean beaches. Its ultra-light corrosion-resistant aluminum construction make it easy to transport, while staying strong enough to burrow into any shore in pursuit of shellfish.

Measuring 31" in length, it features a 5" x 15" barrel with a 1-3/16" x 10" T-handle with a polycarbonate lining to pad your hands a little bit. (Some people consider the aluminum Danielson razor clam gun to be the Cadillac of clam guns.)

Now, like the old-time clam expert says: "Ya can't dig ya clams at high tide." After you've found your spot at LOW tide, go searching along the shore for dimples in the sand.

So how do you use a clam gun?

Set your clam gun barrel off-center with more sand on the side facing the water. Push down while twisting back and forth, rocking in a circular manner. Once the barrel is as deep as you can go, block the air vent on the underside of the handle with your finger, then pull straight up. When you remove your finger from the vent hole, a core of sand will drop out onto the beach -- and this is where your razor clam will be, if you've got the clammer's luck.

If you want to know more about clam gun usage, try watching a video or two before you go.

Crabs easily scale sloped sides, acts as inescapable pen.
Polypro net, sides have 5 strong metal supports.
Comes with harness and float.
Vinyl coated steel rings.
18" upper ring, 34" lower ring.
16" deep.

Not intended for commercial use.
Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Cone shaped entrances funnel crayfish into the trap.
Designed to make escape difficult.
Vinyl-coated diamond grid steel wire construction.
Measures 9" in diameter at trap center, 16-1/2" long.

Not intended for commercial use.
Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Corrosion-resistant plated steel wire.
Pyramid shaped trap.
Strung with tough poly take-up cords.
Size: 14" X 14".

Not intended for commercial use.
Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.

May be cast with fishing rod.
Top mount swivel gives tangle free use.
2-1/2".

Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.

Premium crab trap harness designed for use with most crab traps and pots. Stainless steel ringed-eye marine snaps. Extra heavy-duty crimps. Large end ring for mainline hook-up. 4 arm design secures trap during deployment/retrieval. Weight: .4 lb

For weighing down crab trap doors. Snaps into place. Size: 12 oz.

Braided-on rope harness and harness float.
Rugged polypro netting with wire grid bottom.
Vinyl coated steel rings, 32" upper, 15" lower.
16" deep.

Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.

Low-stretch, small diameter fishing line.
Great for bottom fishing, trolling, casting.
Provides superior sensitivity and powerful hook sets.
Hollow, spliceable construction.
Proprietary synthetic wax coating for excellent knotting.
Color: White with green spots.
30 lb. test.
Spool length: 300 yards.

For both crab and shrimp traps. Proven effective and convenient. Cylinder design of vinyl coated mesh. Attaches with a snap. Has a screw-on lid for opening to fill with bait. Dimensions: 4-5/8" x 9". Weight: .33 lb.

Red and white crab float.
Buoyancy: 6 lb., 8 oz.
Dimensions: 5" X 11".

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.