Bent shank.
9/0.

100 per pack.

Can handle large bait. One-piece heavy duty wire. 16" long, 5" X 6" net.

99.97% filter efficiency level.
Effective against all particulate aerosols.
Filter assembly #300-3563.
Two pairs per package (four filters total).

A versatile, driving diffused lighting solution.
Tough and durable construction.
UV-resistant powder coated housing.
24 LEDs projecting 19008 lumens.
White housing / white LEDs.
Dimensions: 6.75" X 6.79" X 3.42".

Mounting clamp set.
Galvanized steel construction.
Attaches an antenna of 1" - 2" diameter to a mast.
Includes pliable rubber pad to cushion the antenna.

Easy to use, simply mix in a 1:1 ratio.
For cracks, gouges, voids and holes.
High strength formula makes repairs permanent.
100% waterproof when cured.
Can be used above or below the waterline.
Will not sag, shrink or run.
Size: 4 oz.

Cylinder shape day mark signal.
Heavy-duty vinyl-coated nylon fabric construction.
Galvanized rigid steel framing.
Fully collapsible for storage.
Sets up in seconds.

Size: 24" X 48".

Lightweight nylon, invisible 1/4" opening, flame-resistant.
Color: Black
Size: Regular 22".
144 per box.

Adjusts for elevation and angle. Great for fishing from boats or piers. Cradle configuration secures rod. Permits one motion hook setting and rod removal. Large swivel locking ring. Side mount included.

Length: 4 feet.

Strap for Jim-Buoy PFD incandescent light. Weight: .01 lbs.

Surveyor's solid safety vest by Viking. An ANSI Class 2 vest. Features: - Safety D ring slot access - Survey tape dispenser grommets on lower front pockets - Large pack zip pocket across entire back area - Mesh underarm cooling ventilation panels. HD polyester fluorescent yellow. Size: Large. Weight: .35 lb.

Removes ground-in and surface dirt. Restores a bright look to fiberglass and marine woods. Does not use bleach or chlorine; will not damage wood fibers Fast acting, restores wood to natural color in 20 minutes. Excellent degreaser for tropical hardwoods. Safe to use near plants. Size: 1 liter. Weight: 2.48 lbs.

Boat seat base. Non-adjustable fixed height. 4 prong spider swivels 360° and locks in place. Anodized aluminum construction. Height: 12". Weight: 6 lbs.

Heavyweight nylon, ¼” opening three thread, flame-resistant.
Color: Dark Brown.
Size: Regular 20”.
144 per package.

Beak - Extra strong - Forged - Extra long point - Reversed Turned up - tapered eye - Nickel Plate - 50 per box

Shakespeare heavy-duty extension mast.
Sturdy, lightweight 1-1/2 fiberglass for running cables.
Strong and hollow.
Features:
Chrome-plated brass ferrules, upper male, lower female.
One section.
Mounts with Shakespeare style 409-R or 410-R kits.
Length: 4 feet.

Lightweight nylon, invisible 1/4" opening, flame-resistant.
Color: Dark Brown.
Size: Regular 22".
144 per box.

Includes: - Red and white float - 50 feet of 1/4" poly retrival rope - Line snap and weight.

Light duty sanitary oil lubricant. For all sanitary machine parts. FDA approved, NSF certified for food processing. Size: 9 oz.

Contains everything necessary to re-arm your automatic MD2012.
Use only Mustang Survival re-arm kits.
Use of other re-arm kits may result in improper operation or failure to operate and will void the product's warranty.

Includes:
- one 20 gram CO2 cylinder
- one ready status
- indicator pin
- one bobbin.

Mechanical advantage 12:1. Switchable flow control. Pre-configured for sausage sachet application. Capacity: 10 oz. cartridge, 20 oz. sausage.

Surveyor's solid safety vest by Viking. An ANSI Class 2 vest. Features: - Safety D ring slot access - Survey tape dispenser grommets on lower front pockets - Large pack zip pocket across entire back area - Mesh underarm cooling ventilation panels. HD polyester fluorescent yellow. Size: Extra large. Weight: .35 lb.

Galvanized steel. Has two hex nuts. For wire rope size: 5/16".

Used on vertical, flat surfaces May be used with a rail mount adapter.

Connects the two ends of a roller chain.
Regular steel.
Long link.
Size: #40.

Surveyor's solid safety vest by Viking. An ANSI Class 2 vest. Features: - Safety D ring slot access - Survey tape dispenser grommets on lower front pockets - Large pack zip pocket across entire back area - Mesh underarm cooling ventilation panels. HD polyester fluorescent yellow. Size: Quintuple extra large. Weight: .35 lb.

Surveyor's solid safety vest by Viking. An ANSI Class 2 vest. Features: - Safety D ring slot access - Survey tape dispenser grommets on lower front pockets - Large pack zip pocket across entire back area - Mesh underarm cooling ventilation panels. HD polyester fluorescent yellow. Size: Quadruple extra large. Weight: .35 lb.

Joins two pieces of chain by one pitch increment.
Regular steel.
Size: #40.
Meets ASME/ANSI B29.1 standards.

Chrome plated brass. Diameter: 2-1/2".

Includes: - Q-series light cover - Weather resistant seal - Four symmetrical diffusion plates - Four directional diffusion plates. Color: Clear.

Includes: - Q-series light cover - Weather resistant seal - Four symmetrical diffusion plates - Four directional diffusion plates. Color: Amber.

Engineer grade reflective tape. Vibrant during the daytime, reflective at night. Rated for 7 years of outdoor use. Often used for creating buoy stripes. Aggressive adhesive will stick to clean and dry surfaces. 150 foot per roll. Color: Reflective Green. 2" wide.

Stainless steel construction. To use, slide the grippers over a fish's jaw. The fish's weight will tighten the grip. Built-in calibrated scale measures fish up to 30 lb. Includes an adjustable wrist strap for safety.

It's razor clam season! When the weather starts getting colder, it's time to head to the coast!

The Pacific razor clam is one of the most popular types of shellfish harvested in Washington state. They're super meaty with a narrow, slightly curved shell -- much like the handle or blade of an old-style straight razor. (The edge of the clamshell can be "razor-sharp" too, so watch your fingers when you're digging!)

The folks that live in the Pacific Northwest are lucky to have one of the best razor clam locations in the world. Digging for these delicious clams is a fun activity suitable for all members of your family, from kids to grandparents. Depending on where you go, you might see as many as a thousand other razor clam seekers sharing the beach. But don't worry: there are plenty of razor clams for everyone.

So how do you prepare to go razor clam digging?

You definitely need the right gear before you go.
The basic setup for a day of razor clamming includes:
 1) The correct license
 2) A clam shovel or clam gun
 3) A clam net bag to hold your catch

First, make sure you have the proper Washington state license. You will need a razor clam license to harvest clams legally (or one of the shellfish/seaweed combo licenses, there are several different kinds). You can order one online, by phone, or at an authorized license dealer. Once you have it, you'll need to keep that license in your possession while you're digging and after you've caught your limit (in case a ranger needs to inspect it).

Next, you'll need a tool to actually dig down and pull those elusive clams out of the sand. The Danielson clam gun is one option of that necessary gear (the other option is a clam shovel).

This clam gun has been engineered specifically for removing razor clams from sandy ocean beaches. Its ultra-light corrosion-resistant aluminum construction make it easy to transport, while staying strong enough to burrow into any shore in pursuit of shellfish.

Measuring 31" in length, it features a 5" x 15" barrel with a 1-3/16" x 10" T-handle with a polycarbonate lining to pad your hands a little bit. (Some people consider the aluminum Danielson razor clam gun to be the Cadillac of clam guns.)

Now, like the old-time clam expert says: "Ya can't dig ya clams at high tide." After you've found your spot at LOW tide, go searching along the shore for dimples in the sand.

So how do you use a clam gun?

Set your clam gun barrel off-center with more sand on the side facing the water. Push down while twisting back and forth, rocking in a circular manner. Once the barrel is as deep as you can go, block the air vent on the underside of the handle with your finger, then pull straight up. When you remove your finger from the vent hole, a core of sand will drop out onto the beach -- and this is where your razor clam will be, if you've got the clammer's luck.

If you want to know more about clam gun usage, try watching a video or two before you go.