Single-piece aluminum davit mount, with lip.
Sleeved.

For 1.5" davit.

Base dimensions: 3" wide, 6.5" long.

Sheave with roll pin. Anodized aluminum construction.

Lightweight graphite frame and sideplates. Forged and machined aluminum spool. High-strength marine-grade bronze alloy main gear. Stainless steel pinion gear. HT-100 carbon fiber drag washers. 2+1 shielded stainless steel bearing system. Instant anti-reverse bearing with silent back-up ratchet. Line capacity rings.

For trolling, casting, or bottom fishing. Features: - Multi-disc star drag system - Convertible power handle - Shielded, stainless steel - Precision machined, stainless steel pinion - High strength, manganese bronze main gear - Single-piece aluminum spool. Line capacity yards/pounds: 320 / 20. Gear ratio: 3.2 : 1.

Single release. Attached with leader to a #9 snap. Black clip.

Release has firm tension to reduce false releases. Allows you to run two lines off the same downrigger

Weather-resistant connections. Corrosion-resistant design. Locking blades for a secure electrical contact. Does NOT come with an angle bracket.

Designed for use with "Depthpower" electric downriggers. Color: Red. 24 beads per package.

Brings weights in for rigging lines. Releases without having to lean over the gunnel. Heavy duty, long-wearing nylon fairlead. A must for all downrigger fishermen.

Lightweight graphite frame and sideplates. Forged and machined aluminum spool. High-strength marine-grade bronze alloy main gear. Stainless steel pinion gear. HT-100 carbon fiber drag washers. 2+1 shielded stainless steel bearing system. Instant anti-reverse bearing with silent back-up ratchet. Line capacity rings.

Model H55M.
For 40 - 100 lb. line.
Length: 5 feet, 6".

Designed to not snag on weeds or foul lines. Patented "adjustable tension" mechanism. Soft, padded tips hold line securely. Clip only, no leader or snap.

Master Fishing Tackle light saltwater rod and reel.
Includes:
- Master 180 Level Wind 2 ball-bearing reel
- Medium action 8 foot, two piece rod.
Spooled with 17 lb. test monofilament.
Features a foam grip and graphite reel seat.

A powerful recreational line hauler.
Can pull 1-3 prawn traps or a crab trap.
Runs quiet and stores easily.
Added corrosion protection so it’s ready for the harsh salt water environment.
Rated for a maximum load of 110 pounds.
Easy, quick mounting and storage
Accommodates 3/16” – 5/16” (about 5-8mm) line size.
Tough epoxy powder-coated aluminum frame resists corrosion, heavy-duty aluminum frame and boom.
Boom folds down to stow in frame.

Tough reinforced nylon construction. Fits Scotty post rod holder mounts. Makes retrieving crab traps easy. Does not include a mount.

Medium/heavy action.
Features graphite composite construction, and is equipped with turbo guides and gimbal.
Diamond wrapped.
Length: 5 feet.

On/off switch for EZ-Pull.
For us with EZ-Pull electric pot pullers.

This package includes:
- Sleeved gunnel mount and sleeved deck mount
- Aluminum pulley block
- Davit
- Electrical switch assembly
- Hauling motor.

Davit is 2" schedule 80 aluminum tubing - 74" tall with a reach of 32".
Equipped with a 2.5 HP DC motor. This unit pulls 160 feet per minute, and has a pulling capacity of 225 pounds, and it accepts line sizes 1/4" to 3/8".
The manufacturer recommends this unit for pulling multiple pots on one line.

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Designed to not snag on weeds or foul lines. Patented "adjustable tension" mechanism. Soft, padded tips hold line securely. Includes an attached stacking, self-locating snap. Leader length: 30".

For use with all Scotty tilt-up downriggers. Dimensions: 2-1/2" X 4-1/2". Bolting dimensions: 3-3/4" X 1-5/8".

Gives full 360° rotation with 16 locking positions. Quick fastening stainless steel mounting knobs. Fits all Scotty downriggers. Dimensions: 5-1/2" X 5-1/2" X 4". Bolting dimensions: 4-1/2" X 3-1/2".

Replacement / spare knobs. Two per pack.

Dimensions: 5-5/8" X 5-1/8" X 5/8". Bolting dimensions: 4-1/2" X 3-1/2".

Molded nylon beads. For auto stop and for locating line releases. Three each, black and yellow. 6 per package.

Split brass crimps For locating line releases. 10 per package.

Premium, stainless steel downrigger cable. Corrosion resistant and made to last. 150 lb. test. Length: 200 ft.

Premium, stainless steel downrigger cable. Corrosion resistant and made to last. 150 lb. test. Length: 300 ft.

Single-piece aluminum davit mount.
Pipe stub is 2-3/8" tall.
Angle is 2" high.

For 1.5" davit.
Base dimensions: 3" wide, 6.5" long.

Does not include sleeve.

Replacement sleeve for a 1-1/2" davit mount.

Single-piece aluminum davit mount.
Sleeved.

For 1.5" davit.

Base dimensions: 3" wide, 6.5" long.

A precision-cut piece of aluminum, used in specific installations of hauler systems.
Dimensions: 3" X 7/8".