For use with Marol power steering pump. Includes mounting hardware.

For use with SeaStar single cylinder outboard system. Length: 27-1/2". Includes instructions.

For pivot mount cylinders. No adapters are required.

Custom adapter plate for Honda Outboard motors.
Used with Marol outboard cylinders

Replacement pulley for Marol steering pump.

For MRB75 / 80.

Package of 10 quad rings. Part number HS6038.

Rubber construction. O-rings. Thickness: .210". 20 per package.

For MRB50 / 63.

Vertical bleed tee.
#5MORB X 3/8" compression x bleed nipple.  
Two per package.

Horizontal bleed tee.
#5MORB X 3/8” compression x bleed nipple.
Two per package.

90˚ elbow.
#5MORB X 3/8” compression.  
Two per package. 

Straight adapter.  
3/8" compression X #5MORB.
Two per package.

3/8" OD semi-rigid black nylon tubing.
For Hynautic steering control systems.
High tensile strength and excellent coupling
retention in high pressure, temperature and
vibration environments.
Sold by the foot.

Allows for the periodic required realignment of two outboard
motors or rudders that are linked together with a hydraulic
tie bar as opposed to a solid link or a mechanical tie bar.

Vented male helm pump plug.
Must be used with helm pump on all single
steering station systems.
Must also be used on uppermost helm pump on
multi-steering station systems.
Ergonomic design to assist with the
installation and removal resulting in less
chance of over-tightening leading to damage.

Non-vented male helm pump plug.
Must be used on all helm pumps other than uppermost helm
pump on multi-steering station systems.
Ergonomic design to assist with the installation and removal
resulting  in less chance of over-tightening leading to
damage.

This kit makes bleeding and purging your SeaStar hydraulic steering system much easier.
Seastar suggests: first, pre-fill your helm, attach the filler kit with a quart of SeaStar fluid (HA5430H), puncture the bottom end of the bottle with the included pushpin, and begin the bleeding process.

This kit is designed to retrofit a new
SeaStar helm into a larger dash cut out (4.5")
or reduce helm protrusion from the dash by
the thickness of the dash.
Not for use with Baystar helm pumps.

Bleed tee (TM Cylinders).
3/4" UNF 45˚ flare (1/2" tube) X 3/8" NPT X bleed nipple.
Two per package.

Vertical bleed tee.
3/8" compression X 3/8" NPT X bleed nipple.
Two per package.

3/8” compression X 1/4" MNPT 90˚ elbow.
Three per package.

Horizontal bleed tee.
3/8" compression X 1/4" NPT X bleed nipple.
Two per package.

3/8" compression tube nut.  
For use with 3/8" nylon and/or 3/8" copper tubing.
Six per package.

3/8" compression tee.
Three per package.

Bleed nipple.
Includes O-ring.
For use with front mount cylinders only.
Two per package.

Replacement fill plug. For use with all Marol helm models.

Female #6 SAE 45° swivel X 3/8" ID hose.
Brass construction.                      
Field attachable.                        
Fits MSH-6 hose.  

For transferring hydraulic fluid. Used with Marol helm pumps.

SeaStar Pro Kevlar reinforced steering hose.  
Includes two hoses - can be used with all
SeaStar systems, except BayStar, Capilano
and 3-line inboard systems.
Factory swaged fittings.
Length: 18'

Saltwater and corrosion resistant. Rated for 1000 psi working pressure. Used for hydraulic steering systems. Fiber-reinforced nylon tube with a polyurethane cover. Color: Black. Diameter: 3/8".

Saltwater and corrosion resistant. Rated for 1000 psi working pressure. Used for hydraulic steering systems. Fiber-reinforced nylon tube with a polyurethane cover. Color: Black. Diameter: 5/16".

Fill and valve assembly for hynautic reservoirs. Manufacturer number: HP6122. Weight: .10 lb.

SeaStar aluminum inboard cylinder rod end ball joint.
Stainless steel.
1/2" x 20FNF thread, 1/2" hole.

SeaStar cylinder specific large rod end ball joint.
Stainless steel.
3/4" x 16FNF thread, 3/4" hole.

SeaStar/Capilano brass cylinder rod end ball joint.
Stainless steel.
5/8" x 18FNF thread, 5/8" hole.