Amercoat 302 reinforced inorganic zinc-rich primer used for protecting steel.
Used on tanks, equipment, piping, ships, barges, and more.
Easily applied, low VOC, fast-dry.
Pre-mixed with zinc dust.
Converter, used with 1 gallon of resin.

Amercoat 302 reinforced inorganic zinc primer. Zinc-rich primer used for protecting steel. Used on tanks, equipment, piping, ships, barges, Easily applied, low VOC, fast-dry. Pre-mixed with zinc dust. Converter, used with 5 gallons of resin. Weight: 2.3 lbs.

Converts rust into a barrier layer of magnetite. A bonding agent for epoxy, acrylic, and oil-based finishes. Gives exceptional bonding with moisture cured polyurethanes. May be used as a rust converter, or paint / etch primer. Eliminates the need to mechanically blast to white metal. Not for use with zinc chromates or zinc phosphates. Size: 1 gal. Coverage: Approximately 200 square feet, at 10 mil.

Converts rust into a barrier layer of magnetite. A bonding agent for epoxy, acrylic, and oil-based finishes. Gives exceptional bonding with moisture cured polyurethanes. May be used as a rust converter, or paint / etch primer. Eliminates the need to mechanically blast to white metal. Not for use with zinc chromates or zinc phosphates. Size: 5 gal. Coverage: Approximately 1000 square feet, at 10 mil.

Provides excellent protection for bare metals by inhibiting corrosion.
Useful on aluminum, steel, iron, copper, bronze, lead, and more.
Forms a strong bond with underwater metals and running gear.
Dries to a smooth layer of zinc film, which will self-clean.
May be used above or below the waterline.
Size: 1 quart.
Color: Gray.

A two-part water-based epoxy primer / sealer.

May be used on concrete, masonry, fiberglass, wood and previously painted substrates.
This primer is recommended for your projects with Tuff Coat for proper adhesion.
Simple 1:1 mix.

1 gallon kit.

Amercoat 302 reinforced inorganic zinc primer. Zinc-rich primer used for protecting steel. Used on tanks, equipment, piping, ships, barges, Easily applied, low VOC, fast-dry. Provides outstanding corrosion resistance. Pre-mixed with zinc dust Mixing ratio, by volume: 1 part cure to 9 parts resin.

A multi-purpose two-part epoxy primer.
Suitable for use under all Interlux topside finishes
It can be used to resurface cracked and crazed gelcoat, and over clear epoxies to eliminate the effects of amine blush.
Size: 1 qt.

An "All-in-One" primer.
Single-part multipurpose primer for above the waterline.
Combines the features of separate substrate primers in one.
Adheres well to wood, fiberglass, metals: bare or painted surfaces.
Excellent covering capability, high build, good grain filling.
Provides corrosion protection on steel.
Color: Gray.
Size: 3/4 liter.

Inter-Prime wood sealant. Suitable for either interior or exterior use. Stops varnish from soaking into the wood and seals grain. Helps varnish or paint to dry without "high" and "low" spots Recommended for sealing plywood to resist cracking.

2 component epoxy-polyamide coating for use on sandblasted aluminum where maximum resistance to fresh or salt water is required
Smooth finish provides an excellent bonding surface for additional primers or topcoats
Excellent water, chemical and corrosion resistance for aluminum.
High performance Strontium chromate primer for all aluminum.
Size: .75 gallon kit.

White undercoated smoothes out any surface.
Base coat for aged, cracked, pitted surfaces
For fiberglass, wood, previously painted surfaces.
Dries quickly - easy to sand.
Use Pettit 120 brushing thinner.

White Easypoxy undercoater.
Smoothes out any surface.
A base coat for aged, cracked, pitted surfaces.
Use it on fiberglass, wood, previously painted surfaces.
Dries quickly and is easy to sand.
Mixes with Pettit 120 brushing thinner.
Size: 1 gallon.