"Flat tank" design makes it easy to change your engine oil. Compact, strong and easy to store when not in use. Equipped with a self-priming, run-dry pump. 3.5 gallon capacity. Includes: - Tank with easy-pour spout - 12 volt diaphragm pump - Dipstick-style suction tube - Battery clamp wire leads.

Standard 10" clear housing for 2-3/4" X 10" filter elements.

5 micron filter element.

Filter housing mounting bracket and screw.

Brass construction.

Thread size: 3/4" NPT.

Length: 4". 

Can deliver almost 7 GPM at open flow.
Equipped with pressure-cast bronze body.
Features a reusable O-ring type end cover seal.
1/2" internal pipe thread and 1" external hose barb.
Includes 2 port adapter.
24 volt DC.

Jabsco 50880 shower drain / bilge pump. A single-diaphragm, 4.2 GPM plastic-body pump. Flexible installation, compact and simple design. Dry-running capability. Pump heads and ports may be rotated during installation. 12 volt.

21" with Float Solid brass piston rod for strength & durability. Easily disassembled for cleaning. 1-1/2" barrel means quick pumpouts. 5 year warranty, Includes 24" of 1-1/8" black bilge flex hose.

High-pressure gauge.

Nitrile. 9 blades. Diameter: 2".

Brass construction.
1" X 2".

Combination displacement lift / siphon pump. Suitable for transferring diesel, oil, or water. Clear tubing. Not intended for PVC-attacking solvents.

Heavy-walled FDA-approved vinyl compound. Reinforced with polyester braid. Non-toxic, tasteless, odorless. Red tracer in clear PVC. Appropriate for: - Hot/cold pressurized water systems - Vent and drain lines - Bilge pump discharge. For temperature range: 25° F - 150° F. Rated for a burst pressure of 250 psi. Size: 1-1/4".

Kink resistant and flexible. Designed with an EPDM tube and cover. Wire-reinforced with two fabric plies. Resistant to toilet chemicals, odors, salt water and heat. Primarily used for toilet to holding tank connections. Works well as a holding tank pump-out hose. Diameter: 1".

Neoprene. 10 blades. Diameter: 1-9/16".

Nitrile. 10 blades. Diameter: 1-9/16".

Same pump used in Jabsco multi-engine oil change system Can change oil in a typical V-8 in minutes 3/8" NPT male threaded Dimensions: 7-1/8"L x 3-3/4"W

Operates by the rotary sliding vane principle Has vectra rotor and vanes that are designed to handle oil or diesel fuel transfer Pumps up to 5-1/2 GPM and transfers diesel fuel from a 55 gallon drum in 10 minutes Self-priming to 3 feet - Low amp draw Vane Puppies are equipped with a high torque motor with ball type shaft bearings Rated for continuous duty operation Bronze pump has ports with 1/2" internal pump thread 1" external hose barb Also supplied are port adaptors for 3/4" gallon hose thread. Weight: 6.4 lbs

Clear PVC with a black vinyl helix. Abrasion, saltwater, and chemical resistant, flexible. Often used for: - Bilge pump discharge - Potable water tanks fills - Drains for sinks, showers, livewells, or scuppers. This hose uses 147 right hand thread cuffs. Do not attach to thru hull fitting below the water line. Not for use with glycol-based antifreeze. Diameter: 1".

Heavy-duty for hot or cold water systems. Extra wall thickness increases kink resistance. FDA-approved virgin vinyl compound. Diameter: 1/2".

An auxiliary water pump. 1" inlet and outlet. 12 volt.

Media for tank sand filter.

Hayward filter clamp.

Hayward two-way isolation control valve.

Electromagnetic clutch pumps equipped with a powerful electric clutch for convenient remote operation 12 volt model Capable of operating through a wide range of speeds and in either rotational direction 1B Pulley Belt Grooves - 1" NIPT - 26 GPM Weight: 14.75 lbs

Pump type: F5B-9.
For Volvo, AQ131, AQ140A-170.
JP part number: 10-32621-2.
Volvo part number: 855517.

Designed for engine intake, bilge discharge and other lines. Reinforced with wire helix embedded in synthetic material. Excellent flexibility and bend radius. Resists heat, fumes, ozone, acid, salt water and abrasion. Color: Black with blue stripe. Diameter: 1-3/4". Length: 12.5 feet.

Designed for engine intake, bilge discharge and other lines.
Reinforced with wire helix embedded in synthetic material. Resists heat, fumes, ozone, acid, salt water and abrasion. Color: Black with blue stripe. Diameter: 1-3/8". Length: 12.5 feet.

U-bolt style exhaust clamp. 
Secures exhaust tubing. 
Diameter: 8". 

Compatible with many inboard and outboard motors. Will not separate 2 cycle oil from gasoline. 21 micron filter.