Galvanized steel. Size: 5/16". Not designed for load-bearing purposes. Working load limits have not been established.

Galvanized steel. Size: 3/4". Not designed for load-bearing purposes. Working load limits have not been established.

Galvanized steel. Size: 1/2". Not designed for load-bearing purposes. Working load limits have not been established.

Galvanized steel. Size: 5/8". Not designed for load-bearing purposes. Working load limits have not been established.

Rounded on one side, flat on opposite. Both sides are double cut. Length: 10".

General purpose chain. Standard commercial quality chain. Low-carbon steel. Galvanized and proof tested. 150 feet per drum. Diameter: 5/8". Working load limit: 6900 lbs. Weight: 2.7 lbs. per foot.

Cutter wheels and reamer are hardened alloy steel. 
Tool cuts tubing, copper, brass, and thin wall conduit. 
1/8" to 1-1/8" capacity. 
Has a reamer blade to clean off any sharp edges.

Instantly adjusts for 10"/250mm to 12"/300mm blades. Adjusts 90° for vertical or horizontal cuts. Comes with 10" blade.

Twelve screwdrivers. 
Black oxide non-slip tips. 
Slotted and Phillips. 
Color: Red and black. 

High visibility orange, high impact case. Rubber cushion grip. Easy-to-read yellow steel blade. Top-positioned toggle lock. Blade width: 3/4". Length: 16 feet.

Stainless steel pin for hammerlock. Required for fixture use. Size: 1". Weight: .8 lb.

Half round file, bastard cut. Double cut. Length: 4".

30 piece 3/8" drive set.
Standard and deep SAE / metric mechanics tool set.
Great set of sockets for your boat, car, or shop.
Packaged in handsome high-impact plastic case.

Stainless steel pin for hammerlock. Required for fixture use. Size: 5/8". Weight: .5 lb.

Alloy steel, chrome finish.
Jaw capacity: 15/16".
Length: 6".

Heavy duty latch and spring assembly.
Extra thick steel construction, a double strength spring and a stainless steel latch bolt.
Working load limit: 3 tons.
Forged steel construction, painted orange.
Trade size: #25.

Used to file circular openings or concave surfaces. Single cut. Tapered slightly toward point. Length: 8".

Stainless steel spacer for hammerlock. Required for fixture use. Size: 1". Weight: .3 lb.

Designed for sharpening saws or finishing metal. Single cut on sides and edges. Two square edges. Length: 4".

Lever type load binder. Painted red. For 5/16" - 3/8" chain. Rated for 5,400 lb. Allows for quicker application of load than a ratchet.

Designed for sharpening saws or finishing metal. Single cut on sides and edges. Two square edges. Length: 10".

High strength carbon steel chain.
Galvanized and proof tested.
Good for towing, dragging, logging.
550 feet per drum.
Diameter: 5/16".
Working load limit: 3900 lbs.

Stainless steel spacer for hammerlock. Required for fixture use. Size: 1/2". Weight: .05 lb.

Designed for sharpening saws or finishing metal. Single cut on sides and edges. Two square edges. Length: 8".

Designed for sharpening saws or finishing metal. Single cut on sides and edges. Two square edges. Length: 6".

Reverse eye round loose hook. Regular wood shell. Single sheave. Bronze bushings. Working load limit: 1000 lb. Fits 1/2" rope. Size: 4".

Precisely machined ferrule for fine jaw adjustment. Has an integral wire cutter for increased versatility. Compound action for powerful non-slip locking grip. Curved jaw. Length: 7".