Single-component alkyd gloss topcoat. Designed to protect and enhance marine exteriors. Great weathering properties, easy to apply, drys quickly. Not meant to resist severe chemical or immersion conditions. Color: Deep Blue. Size: 1 gal.

Amercoat 302 reinforced inorganic zinc primer. Zinc-rich primer used for protecting steel. Used on tanks, equipment, piping, ships, barges, Easily applied, low VOC, fast-dry. Provides outstanding corrosion resistance. Pre-mixed with zinc dust Mixing ratio, by volume: 1 part cure to 9 parts resin.

Semi-gloss multi-purpose epoxy coating. Provides salt and freshwater corrosion protection. Excellent adhesion to tight rust, self priming. Used on ballast tanks, bilges, and drainage pipes. Color: Haze Gray. Size: 1 gal.

Amercoat 214 low VOC antifouling paint. Recommended where regulations ban organotin. Long-lasting paint for fouling waters, up to 24 months. High performance for heavy-duty service. Color: Red. Size: 5 gal.

Catalyst and resin for two-part Amerlock epoxy sealer. Used for marginally prepared steel and old coatings. Excellent resistance to corrosive environments. Size: 2 gal. total.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "RT-1503 Gray." Size: 1 gal.

Touluene/acetone cleaner/thinner. Compliant with SCAQMD Rule 1171. Flash point: 2 degrees F. Size: 1 gal.

Amercoat 229T is used as an above-water finish. Durable, tough epoxy, a colorful and glossy top coat. color and gloss retention of the acrylic polymer. Resistant to a broad range of corrosive atmospheres. Resists soil pickup - cleans easily. Hard, flexible and abrasion resistant.

Multi-purpose edge retentive epoxy coating.
Designed for direct-metal application.
Exceptional corrosion protection and edge coverage.
Surface tolerant, excellent adhesion to tight rust.
Fast-drying, low-temperature cure.
Color: Off-White.
Size: 5 gal.

Use with specified Ameron products. Thinner or for clean up. Flashpoint: 76 degrees F

Amercoat 229T is used as an above-water finish. Durable, tough epoxy, a colorful and glossy top coat. Resists soil and grime pickup; cleans easily. Use wherever corrosion resistance is needed. Color: RT-1403 Light Gray. Size: 1 gal.

Multi-purpose edge retentive epoxy coating. 
Designed for direct-metal application. 
Exceptional corrosion protection and edge coverage. 
Surface tolerant, excellent adhesion to tight rust. 
Two part, with fast-drying, low-temperature cure. 
Color: Haze Gray. 
Size: 1 gal. 

Semi-gloss multi-purpose epoxy coating. Provides salt and freshwater corrosion protection. Excellent adhesion to tight rust, self priming. Used on ballast tanks, bilges, and drainage pipes. Color: Light Gray. Size: 1 gal.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "Snow White." Size: 1 gal.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "Blue White." Size: 1 gal.

Two-component gloss aliphatic polyurethane topcoat. Offers outstanding weather resistance and color retention. Resists soil, corrosive atmospheres, abrasion and water. Hard, flexible, and easy to clean. Used as a finish coat in many marine applications. Color: White. Size: 1 gal.

Semi-gloss multi-purpose epoxy coating. Provides salt and freshwater corrosion protection. Excellent adhesion to tight rust, self priming. Used on ballast tanks, bilges, and drainage pipes. Color: Off-White. Size: 1 gal.

Amercoat 911 thinner. n-Butyl acetate. Flash point: 76 degrees F. Size: 1 gal. Weight: 7.25 lbs.

Amercoat ABC Series self-polishing antifouling coating.
A high-performance tin-free bottom paint.
Unique design prevents attachment of marine life.
Ideal for ships with prolonged dry-dock intervals.
Provides long-life protection, reduces drag resistance.
Contains 47.9% cuprous oxide.
Color: Red.
Size: 1 ga.

Two-component gloss aliphatic polyurethane topcoat. Offers outstanding weather resistance and color retention. Resists soil, corrosive atmospheres, abrasion and water. Hard, flexible, and easy to clean. Used as a finish coat in many marine applications. Color: Black. Size: 1 gal.

Semi-gloss multi-purpose epoxy coating. Provides salt and freshwater corrosion protection. Excellent adhesion to tight rust, self priming. Used on ballast tanks, bilges, and drainage pipes. Color: Black. Size: 1 gal.

Semi-gloss multi-purpose epoxy coating. Provides salt and freshwater corrosion protection. Excellent adhesion to tight rust, self priming. Used on ballast tanks, bilges, and drainage pipes. For 5 gallons of Amercoat 235 resin. Size: 1 gal. Weight: 8.8 lbs.

Semi-gloss multi-purpose epoxy coating. Provides salt and freshwater corrosion protection. Excellent adhesion to tight rust, self priming. Used on ballast tanks, bilges, and drainage pipes. For 1 gallons of Amercoat 235 resin. Size: 1 qt. Weight: 2 lbs.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "White." Size: 5 gal.

Low-temperature converter for Amercoat resin.
Designed for direct-metal application.
Exceptional corrosion protection and edge coverage.
Surface tolerant, excellent adhesion to tight rust.
Cure only, must be combined with resin.
Size: 1 qt.

Preperation 88 marine water-based cleaner. Cleans soiled and chalked surfaces. Dramatically improves aged recoatability. Ideal for cleaning surfaces before drydock painting. Size: 1 gal. Weight: 9.14 lbs.

High-gloss multi-purpose siloxane converter. Single component, used with PSX 700 resin. Provides great weather and chemical resistance. Resists moisture, humidity, corrosion, and acid. FD cure should be used below 40° F. High solids, low VOC. Color: Clear. Size: 1 quart.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "Super Blue" Size: 1 gal.

Amercoat ABC Series self-polishing antifouling coating.
A high-performance tin-free bottom paint.
Unique design prevents attachment of marine life.
Ideal for ships with prolonged dry-dock intervals.
Provides long-life protection, reduces drag resistance.
Contains 47.9% cuprous oxide.
Color: Black.
Size: 1 gal

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "Safety yellow." Size: 1 gal.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "Oxide Red." Size: 1 gal.

Amercoat 851 flow control additive. Use with Amershield, Amercoat 450HS or Amercoat 450SA. Provides a smooth coating and improves topcoat appearance. Mix Ratio: One 1/2 pint of 851 to each gallon of topcoat. Size: 1/2 pt. Weight: .6 lbs.

Amerlock 2 fast-drying surface tolerant epoxy. Adheres to tight rust and prepared damp surfaces. Provides great corrosion protection. Typically used on steel decks, hulls, and pipes. Color: Black primer. Size: 2 gal.

Use with specified Ameron products. Thinner or for clean up. Flashpoint: 76 degrees F. Weight: 7.25 lbs.

Multi-purpose edge retentive epoxy coating. 
Designed for direct-metal application. 
Exceptional corrosion protection and edge coverage. 
Surface tolerant, excellent adhesion to tight rust. 
Two part, with fast-drying, low-temperature cure. 
Color: Off-White. 
Size: 1 gal. 

Semi-gloss multi-purpose epoxy coating. Provides salt and freshwater corrosion protection. Excellent adhesion to tight rust, self priming. Used on ballast tanks, bilges, and drainage pipes. Color: Dark Gray. Size: 5 gal.