Conversion kit for propane heater. Allows the use of disposable 1 lb. propane bottles.

Dickinson stove top, complete with lid. Cast iron construction. For Dickinson Bristol diesel stoves.   Part # 07-060. Weight: 25 lbs.
NOTE: This is the cast iron top for stoves made after 1986.  For stoves made pre-1986, the sea rail, backsplash and flue collar would also have to be updated.

Stainless steel construction.
Dimensions: 4" X 22".

Dickinson barometric draft damper kit. Required to stabilize draft. Stainless steel. Dimensions: 4" x 22". Part # 17-001.

For medium boats (36 - 42 foot).
Most popular model.
Features a double-insulated outer surface.
Flue size: 5".
Burner size: 6" stainless steel 'Airflow'.
Overall dimensions: w 21.75" X h 23.5" X d 21.5".
Oven size: 10" X 13" X 10.5".
A 12V assist fan is standard, 24V or 32V optional.
Heat output: 6500 - 16250 BTU.
Net Weight: 110 lbs.
Shipping Weight: 156 lbs.

To prevent damage from shipping, all stoves are required to be shipped on a pallet via Barge or Trucking company only.
Please call 1-800-426-2783 for further information.

Stainless steel.
Diameter: 4".

Dickinson thru-deck pipe fitting. Includes pipe, gasket and dress ring. Stainless steel construction. Dimensions: 4" ring. Part # 17-050. Weight: 1.8 lbs.

Dickinson deck pipe flue cap. Stainless steel construction. Slotted for smoke venting. Dimensions: 4". Part # 17-080. Weight: 1.8 lbs.

Dickinson deck pipe flue "H smoke cap." Stainless steel construction. Two outlets for smoke venting. Dimensions: 4". Part # 17-090. Weight: 2.2 lbs.

Dickinson insoline cement. For Dickinson Marine heaters and stoves. Adheres to fire bricks and metals. High-temperature resistant. Simply mix with water for installation or repairs. Use for: metal to metal, metal to masonry. Weight: 5 lbs.

Fire brick for Dickinson stoves. Medium duty, insulates combustion chamber. Part # 05-000. Weight: .5 lbs

Dickinson glass window. Heat-resistant and clear. For all Dickinson diesel oil stoves. Part # 05-065. Size: 3-3/8" x 3-3/8". Weight: .1 lbs.

Dickinson heat-resistant Hybond cement.
Air setting "Super 3000 Hybond sealant."
For use with Dickinson oil stoves and heaters.
Max joint thickness: 1/8" Sets at room temperature in 24 hours.
Use on: brick to brick, metal to brick, metal to metal.
Part # 05-040.
Size: 500 ML.

Dickinson propane galley range.
Features:
- Two efficient 11,000 and 7,000 BTU burners
- 100% stainless steel construction
- Includes pot holders and removable cutting board.
Overall Dimensions: w 23" X d 14" X h 4.75".
Counter Cutout: w 21.5" X d 12.5" X h 4.25".

To prevent damage from shipping, all stoves are required to be shipped on a pallet via Barge or Trucking company only.
Please call 1-800-426-2783 for further information.

Stainless steel construction.
Dimensions: 5" X 22".

Stove pipe with barometric flue. Ideal as the first pipe in your flue stack. Part #: 180-001. Length: 22". Flue: 5". Weight: .4

Dickinson barometric draft damper kit. Install on flue pipe 12" to 20" above unit. Required to stabilize draft. Dimensions: 5" x 9" Part # 18-010. Weight: .4 lbs.

Knob for Dickinson motor speed control switches. Part # 01-120. Weight: .01 lbs.

Dickinson "Mediterranean" propane galley range.
Features:
- Three efficient 11,000 and 7,000 BTU burners
- 100% stainless steel construction
- Thermostatically-controlled oven and broiler
- Includes pot holders and removable cutting board.
Dimensions: 20.375" X 21.75" X 20.25".
Net Weight: 80 lbs
Shipping Weight: 115 lbs.

To prevent damage from shipping, all stoves are required to be shipped on a pallet via Barge or Trucking company only.
Please call 1-800-426-2783 for further information.

Dickinson drip tray for Sea-B-Que. Stainless steel construction. For both small and large Sea-B-Que grills. Easy installation. Part # 15-080. Weight: .3 lbs.

Dickinson replacement burner for large Sea-B-Que. Stainless steel construction. Easy installation. Part # 15-060.

Replacement middle leg burner ring. Cast iron. Fits Atlantic and Beaufort stoves. Part # 04-060. Size: 7". Weight: 2.5 lbs.

Dickinson stovepipe with damper. Stainless steel construction. A stabilizer for flue lengths over approximately 66". Stabilizes drafts in gusty wind conditions. Crimped on one end. Installed in flue pipe 12" to 20" above the heater. Dimensions: 3" X 22". Weight: 1 lb.

Stainless steel construction.
Dimensions: 3" X 22".

Stainless steel.
Diameter: 3".

Dickinson thru-deck pipe fitting. Includes pipe, gasket and dress ring. Stainless steel construction. Dimensions: 3" ring. Part # 16-050. Weight: 1.4 lbs.

Dickinson deck pipe flue cap. Stainless steel construction. Slotted for smoke venting. Dimensions: 3". Part # 16-080. Weight: 1.6 lbs.

Dickinson deck pipe flue "H smoke cap." Stainless steel construction. Two outlets for smoke venting. Dimensions: 3". Part # 16-090 Weight: 2 lbs.

Bulkhead-mounted heater for 30 - 36 foot boats Uses safe, economical diesel fuel. Small, compact. Stainless steel with a decorative valve cover. Heating and optional hot water from one appliance. A 12V assist fan is standard, 24V or 32V optional. Dimensions: w 8.5" X h 19.75" X d 10.5". Heat output: 6500 - 16250 BTU. Flue size: 3". Weight: 22 lbs.

Floor mounted heater for 36 - 40 foot boats. Uses safe, economical diesel fuel. Heating, cooking, and optional hot water from one appliance. A 12V assist fan is standard, 24V or 32V optional. Cast iron lid provides a fine cooking surface. Dimensions: w 10.75" X h 18" X d 17". Heat output: 6500 - 16250 BTU. Flue size: 4". Net Weight: 25 lbs - Shipping Weight: 35 lbs

Oil Metering Valve '3D'. Diesel oil metering valve. For Adriatic, Antarctic, Bering, Lofoten and Pacific stoves. Part # 02-000. Weight: 1.2 lbs.

Oil Metering Valve '4D'. Diesel oil metering valve. For Atlantic stoves. Part # 02-001. Weight: 1.2 lbs.

Oil Metering Valve '5D'. Diesel oil metering valve. For Beaufort stoves. Part # 02-002. Weight: 1.2 lbs.

Oil Metering Valve '3D'. Diesel oil metering valve. For Alaska and Newport stoves. Part # 02-011. Weight: 1.2 lbs.

Oil Metering Valve '3D'. Diesel oil metering valve. For Bristol stoves. Part # 02-012. Weight: 1.2 lbs.

Dickinson reamer rod for diesel stoves. Great for all reaming applications. Steel construction. Part # 14-070. Weight: .3 lbs.