Fill voids, pontoons, floating dock blocks Increases buoyancy. Make your own buoy markers. Mix and pour foam to fill cavities 2-lb. density foam increases insulation, flotation and fills gaps Sets in less than 10 minutes. Ready for use in hours. Weight: 5.67 lbs

Makes easy, permanent color-matched repairs. For use with gelcoat and fiberglass hulls and decks. Simple to use: fills in cracks, scratches, and chips. Try it in bathtubs, shower stalls, and hot tubs. Blends with resin colorants for color matching. Size: 1/2 oz.

Repairs fiberglass scratches. For boats, bathtubs, shower stalls, hot tubs and more. A permanent repair for cracks, scratches, chips. Single-part formula does not need a catalyst. Color: White. Size: 1/2 oz.

Highest quality ISO NPG marine finish gel coat to repair or replace old gel coat Cures to a permanent high-gloss, hard finish and does not require mold release to attain a fully-cured surface Non-run, non-sag formula, flexible polyester resins, resilient and tough Tint with Evercoat coloring agents to desired color Reduce with acetone for sprayers Weight: 2.67 lbs

The quality ISO NPG marine laminating gel coat to permanently repair or replace original, high-glass finish The product cures to a tacky finish for re-coating Evercoat Mold Release (# 105685) must be used to attain a fully cured surface Use to fill gouges, chips, scrapes and deep scratches in the fiberglass gel coat Gel Kote is a non-run, non-sag formulation of flexible polyester resins to produce resiliency and toughness Evercoat Coloring Agents may be used to tint the material to desired color. Reduce with Evercoat Acetone (10%) to thin for sprayer applications. Weight: 1.33 lb

The quality ISO NPG marine laminating gel coat to permanently repair or replace original, high-glass finish The product cures to a tacky finish for re-coating Evercoat Mold Release (# 105685) must be used to attain a fully cured surface Use to fill gouges, chips, scrapes and deep scratches in the fiberglass gel coat Gel Kote is a non-run, non-sag formulation of flexible polyester resins to produce resiliency and toughness Evercoat Coloring Agents may be used to tint the material to desired color. Reduce with Evercoat Acetone (10%) to thin for sprayer applications. Weight: 2.67 lbs

Quick hardening, non-separating, cream hardener.
Formulated for use with body fillers, specialty fillers and polyester finishing putties.
Color: Blue.
Size: 1 oz.

Best for repair of fiberglass and metal surfaces.
Will rebuild rotted-out areas on fenders, body sections and rocker panels.
Also used for forming special customized shapes.

Kit #370 contains:
- 1 quart polyester resin
- 11 cc liquid hardener
- 6 sq. ft. fiberglass mat
- 3" x 5' fiberglass tape
- instructions.

Make gelcoat quality repairs with a simple paste. For fixing scratches, nicks, and gouges. Mixes with Evercoat color agents to match your original hue. Will adhere to gelcoat, fiberglass and most woods and metals Size: 1 pt.

For quick and easy permanent gelcoat repairs. Strengthens, repairs and rebuilds damaged areas. Repair meterial cures to glass hardness in one hour. Features special release film and no-run polyester gel. Includes: - Polyester gel coat paste - Hardener - Color additives - Release film - Mixing sticks - Blending chart and instructions. Size: 4 oz.

Premium Marine Resin Pint 6/ Perfect no-run/ no-sag Polyester resin for marine repairs. Repairs all boat surfaces. Protects against moisture damage. Use with Sea-Glass fiberglass fabrics & Evercoat coloring agents. Liquid hardener included.

Perfect no-run/no-sag polyester resin for marine repairs Repairs all boat surfaces Protects against moisture damage Use with Sea-Glass fiberglass fabrics and Evercoat coloring agents Liquid hardener included Weight: 10 lbs

Perfect no-run/no-sag polyester resin for marine repairs Repairs all boat surfaces Protects against moisture damage Use with Sea-Glass fiberglass fabrics and Evercoat coloring agents Liquid hardener included Weight: 2.83 lbs

Quality laminating resin for base coat applications This resin is not a finish coat This air-inhibited resin remains tacky to hold fiberglass fabric in place on vertical surfaces. Does not require sanding between coats Excellent for saturating fiberglass fabrics Liquid hardener is included Weight: 10.5 lbs

High quality, white plastic filler. For permanent repair of fiberglass, wood, metal. Useful for filling dents, scrapes and gouges. Will not shrink, crack, or pop out after curing. Can be tinted with coloring agents. Includes hardener. Size: 1/2 pint.

High quality, white plastic filler. For permanent repair of fiberglass, wood, metal. Useful for filling dents, scrapes and gouges. Will not shrink, crack, or pop out after curing. Can be tinted with coloring agents. Includes hardener. Size: 1 pint

Sea-Glass fiberglass cloth
Woven fiberglass material.
High strength, flat weave cloth.
Used with polyester or epoxy resin.
For repairing holes, or used as a reinforcing material.
May be used over fiberglass, metal or wood.
Has excellent drapability and wet-out properties.
Package size: 44" X 108" (3 yards).

Both edges are sewn to eliminate raveling.
Great for large construction jobs.
4" wide.
30 foot pack.

For gelcoats and other air-inhibited polyesters. A light mist sprayed on gelcoat will cure resin. Eliminates that tacky feel. Size: 8 oz.

A non-running, non-sagging flexible polyester.
Used to permanently repair and construct gelcoat.
Product cures to a hard finish.
Does not require mold release to fully cure.
Use it to fill gouges, chips, scrapes and other minor damage to fiberglass.
Coloring agents may be used to tint the material.
Color: White.
Size: 1 pint.

The quality ISO NPG marine laminating gel coat to permanently repair or replace original, high-glass finish The product cures to a tacky finish for re-coating Evercoat Mold Release (# 105685) must be used to attain a fully cured surface Use to fill gouges, chips, scrapes and deep scratches in the fiberglass gel coat Gel Kote is a non-run, non-sag formulation of flexible polyester resins to produce resiliency and toughness Evercoat Coloring Agents may be used to tint the material to desired color. Reduce with Evercoat Acetone (10%) to thin for sprayer applications. Weight: 10 lbs

The quality ISO NPG marine laminating gel coat to permanently repair or replace original, high-glass finish The product cures to a tacky finish for re-coating Evercoat Mold Release (# 105685) must be used to attain a fully cured surface Use to fill gouges, chips, scrapes and deep scratches in the fiberglass gel coat Gel-Kote is a non-run, non-sag formulation of flexible polyester resins to produce resiliency and toughness Evercoat Coloring Agents may be used to tint the material to desired color. Reduce with Evercoat Acetone (10%) to thin for sprayer applications. Weight: 2.67 lbs

Quick hardening, non-separating, cream hardener.
Formulated for use with body fillers, specialty fillers and polyester finishing putties.
Color: White.
Size: 4 oz.

For smooth application of all resins and putties. Flexible, durable and reusable. 3 different sizes per package.

Liquid Hardener 11cc 12 Hardening agent for use with all Polyester resins & gelcoats. Plastic squeeze tube has graduated measure for mixing convenience. Use Methyl Ethyl Ketone Peroxide catalyst according to resin/gel coat label directions. Carded

Hardening agent for use with all polyester resins and gel coats Plastic squeeze tube has graduated measure for mixing convenience. Use Methyl Ethyl Ketone Peroxide catalyst according to resin/gel coat label directions. Weight: .166 lb

Repair nylon/ hypalon/ neoprene tough bonding formula Long lasting repairs on: dinghies/ sport boats/other inflatable craft Preserves buoyancy, resists cuts, cracks and impact Not recommended for PVC Repairs Kit includes: Cleaning Solvent 6" x 12" Heavy reinforcing fabric Weight: .333 lb

Best for repair of fiberglass and metal surfaces.
Will rebuild rotted-out areas on fenders, body sections and rocker panels.
Also used for forming special customized shapes.

Kit #637 contains:
- 8 fl.oz. resin
- 1/4 oz. liquid hardener
- 3 sq. ft. fiberglass cloth
- mixing stick, plastic spreader, mixing tray and instructions.

Blends with polyester or epoxy resins. Appropriate for gels, pastes, and putties. Try it with Skid-No-More, Evercoat, or Formula 27. Color: Admiral blue. 1 oz.

Blends with polyester or epoxy resins. Appropriate for gels, pastes, and putties. Try it with Skid-No-More, Evercoat, or Formula 27. Color: Black. 1 oz.

Blends with polyester or epoxy resins. Appropriate for gels, pastes, and putties. Try it with Skid-No-More, Evercoat, or Formula 27. Color: Sunset Yellow. 1 oz.

Blends with polyester or epoxy resins. Appropriate for gels, pastes, and putties. Try it with Skid-No-More, Evercoat, or Formula 27. Color: Brown. 1 oz.

Blends with polyester or epoxy resins. Appropriate for gels, pastes, and putties. Try it with Skid-No-More, Evercoat, or Formula 27. Color: Tropical Red. 1 oz.

High quality, white plastic filler. For permanent repair of fiberglass, wood, metal. Useful for filling dents, scrapes and gouges. Will not shrink, crack, or pop out after curing. Can be tinted with coloring agents. Includes hardener. Size: 1 quart

A general purpose economy finish resin Has excellent wet ability and good strength Must be used with Sea-Glass fiberglass fabrics to ensure proper cure. Can be tinted with Evercoat Coloring Agents, but may not yield an exact color match. This resin can be used on most wood, fiberglass and some metal. Liquid hardener is included. Weight: 2.66 lbs

A general purpose economy finish resin Has excellent wet ability and good strength Must be used with Sea-Glass fiberglass fabrics to ensure proper cure. Can be tinted with Evercoat Coloring Agents, but may not yield an exact color match. This resin can be used on most wood, fiberglass and some metal. Liquid hardener is included. Weight: 10 lbs