Large ice scoop. Cast aluminum. Dimensions: 12" X 5". Weight: 1.18 lbs.

Lead holder. For three cannon balls. Cast aluminum. Hole dimensions: 5-1/2", 6", 6-1/2". Overall dimensions: 20" X 6-1/4" X 3-3/4". Weight: 4.77 lbs.

Cast aluminum. Dimensions: 9-3/8" X 8-1/2".

Open chock. Cast aluminum. Length: 12". Weight: 2.70 lbs.

Open chock. Cast aluminum. Length: 9.1". Width: 1.8". Gap: 1.35". Weight: 1 lb.

Scoop strainer. Cast in bronze. Dimensions: 9" X 13".

Bulwark chock with trim ring. Cast aluminum. Ideal to set outside of bulwark at bow and stern.
Opening size: 3-1/2" X 6-3/8". Weight: 5.35 lb.

Lead holder. For two cannon balls. Cast aluminum. Hole dimensions: 6", 6-1/2". Overall dimensions: 14" X 7" X 3-3/4". Weight: 3.4 lbs.

Lead holder. For two cannon balls. Cast aluminum. Hole dimensions: 5-1/4", 5-1/2". Overall dimensions: 12" X 6-1/4" X 3-3/4". Weight: 2.89 lbs.

5" snatch block.
Cast marine grade aluminum.
Forged galvanized eye bolt.
Equipped with bronze Oilite bushings and Zerk grease fitting for lubrication purposes.
Stainless steel shaft and fasteners.
Safe working load: 2000 pounds.
Length: 15".
OA diameter: 3-3/8".
Sheave width: 1-3/4".
Sheave throat: 1-3/4".

Bulwark chock. Cast aluminum. Ideal to set outside of bulwark at bow and stern. Opening size: 2-5/8" X 5".

Cast aluminum.
Ideal to set outside of bulwark at bow and stern.
Opening size: 3-1/2" X 6-3/8".

Bulwark chock with horns. Cast aluminum. Ideal to set inside of bulwark at bow and stern. Opening size: 3.5" X 6.37".

Deck iron. Cast aluminum construction. Size: 5". Weight: 1.98 lbs.

Cast from marine-grade aluminum. For use with a 2-1/2" thru-hull. Dimensions: 5" X 8" X 2".

Clutch / pump bracket. For use with V20 pumps with a 13944 clutch. Mounts with two bolts. SAE A flange V20 bracket.

Clutch / pump bracket. For use with VTM42 pumps with a 13944 clutch Mounts with two bolts. SAE AA Aluminum VTM.

Open chock. Cast aluminum. Length: 7". Width: 1.31". Gap: 1.3". Weight: .44 lb.

Round rosemount fender tie. Cast from marine-grade aluminum. Inside diameter: 4". Outside diameter: 5-1/4". Tie bar thickness: 3/4". Weight: .57 lb.

Round rosemount fender tie. Cast from marine-grade aluminum. Inside diameter: 2-1/2". Outside diameter: 3-5/8". Tie bar thickness: 5/8". Weight: .46 lb.

14" cast marine-grade aluminum alloy steering wheel.
Standard 3/4" tapered bore.

Weld-on bow eye.
Provides two attachment points for bow fenders.
Size: 4".

Hydraulic pump bracket. Cast from marine-grade aluminum. Designed with a 3-1/4" pilot. For use with Jabsco pumps. Weight: 4.63 lbs.

3" snatch block. Cast marine grade aluminum.
Forged galvanized eye bolt.
Equipped with bronze Oilite bushings and Zerk grease fitting for lubrication purposes.
Stainless steel shaft and fasteners.
Safe working load: 1000 pounds.
Length: 11-1/2".
OA diameter: 1-7/8".
Sheave width: 1-9/16".
Sheave throat: 1-7/16".

14" cast marine-grade aluminum alloy steering wheel.
1" straight bore.

Weld-on bow eye.
Provides an attachment point for a bow fender or boat cover.
Size: 3".

Weld-on bow eye.
Provides an attachment point for a bow fender or boat cover.
Size: 2".

Brailer hook. Non-snagging design for ease of use. Used to hang brailers on inside of fish hold. Cast aluminum, single piece construction. Size: 4-1/2". Weight: .16 lb

Deck iron. Cast aluminum construction. Size: 3". Weight: 1.82 lbs.

Deck iron. Cast aluminum construction. Size: 4". Weight: 1.93 lbs.

Round hatch with ring.
Aluminum construction.
Includes hatch, ring, and screws
Overall dimensions: 9.5" diameter X .63" height
Opening: 6" diameter.

Bulwark chock with horns. Cast aluminum. Ideal to set inside of bulwark at bow and stern. Opening size: 2-5/8" X 5".